u-boot-pxa next

GIT PULL Marek Vasut 3 participants 7 messages Jul 6, 2010 – Jul 14, 2010

lore

Share & tools

lore

Marek Vasut

author

2010-07-06 01:23 UTC #0 lore raw

Hey, these are some additions and fixes. This is against u-boot.git master branch. Please pull, thanks.

-------------------------------------------------------------------------------

The following changes since commit 54841ab50c20d6fa6c9cc3eb826989da3a22d934:

Make sure that argv[] argument pointers are not modified. (2010-07-04 23:55:42
+0200)

are available in the git repository at:
git://git.denx.de/u-boot-pxa.git next

Compulab uboot (1):
PXA: PXA3xx NAND Driver

Marek Vasut (4):
Enable PXAFB for PXA27X and PXA3XX
PXA: Add hardware init helper macros
PXA: Add PWM2 and PWM3 regs to pxa-regs.h
PXA: Add OneNAND booting support to start.S

 arch/arm/cpu/pxa/pxafb.c                 |    9 +-
 arch/arm/cpu/pxa/start.S                 |   48 ++-
 arch/arm/include/asm/arch-pxa/macro.h    |  324 ++++++++++++
 arch/arm/include/asm/arch-pxa/pxa-regs.h |   10 +-
 common/lcd.c                             |   12 +-
 drivers/mtd/nand/Makefile                |    1 +
 drivers/mtd/nand/pxa3xx_nand.c           |  848 ++++++++++++++++++++++++++++++
 include/lcd.h                            |    2 +-
 8 files changed, 1240 insertions(+), 14 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-pxa/macro.h
 create mode 100644 drivers/mtd/nand/pxa3xx_nand.c

Wolfgang Denk

2010-07-14 19:18 UTC #1 lore raw

Dear Marek Vasut,

Quoted 5 lines · In message <[email protected]> you wrote:

Hey, these are some additions and fixes. This is against u-boot.git master branch. Please pull, thanks.
-------------------------------------------------------------------------------

Quoted 7 lines

The following changes since commit 54841ab50c20d6fa6c9cc3eb826989da3a22d934:
Make sure that argv[] argument pointers are not modified. (2010-07-04 23:55:42
+0200)
are available in the git repository at:
git://git.denx.de/u-boot-pxa.git next

I cannot make head nor tail of the next/next branch references.

What am I supposed to do with that? There is no next branch ATM.

Quoted 2 lines

Compulab uboot (1):
PXA: PXA3xx NAND Driver

This has to go through the NAND custodian.

Quoted 5 lines

Marek Vasut (4):
Enable PXAFB for PXA27X and PXA3XX
PXA: Add hardware init helper macros
PXA: Add PWM2 and PWM3 regs to pxa-regs.h
PXA: Add OneNAND booting support to start.S

Ditto.

Quoted 12 lines

 arch/arm/cpu/pxa/pxafb.c                 |    9 +-
 arch/arm/cpu/pxa/start.S                 |   48 ++-
 arch/arm/include/asm/arch-pxa/macro.h    |  324 ++++++++++++
 arch/arm/include/asm/arch-pxa/pxa-regs.h |   10 +-
 common/lcd.c                             |   12 +-
 drivers/mtd/nand/Makefile                |    1 +
 drivers/mtd/nand/pxa3xx_nand.c           |  848 ++++++++++++++++++++++++++++++
 include/lcd.h                            |    2 +-
 8 files changed, 1240 insertions(+), 14 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-pxa/macro.h
 create mode 100644 drivers/mtd/nand/pxa3xx_nand.c

Best regards,

Wolfgang Denk

Signature · 5 lines

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
CAUTION:  The Mass of This Product Contains the Energy Equivalent  of
85 Million Tons of TNT per Net Ounce of Weight.

Scott Wood

2010-07-14 19:31 UTC #2 lore raw

Quoted 16 lines · On Wed, 14 Jul 2010 21:18:48 +0200 Wolfgang Denk <[email protected]> wrote:

Dear Marek Vasut,
Quoted 5 lines · In message <[email protected]> you wrote:
Hey, these are some additions and fixes. This is against u-boot.git master branch. Please pull, thanks.
-------------------------------------------------------------------------------
Quoted 7 lines
The following changes since commit 54841ab50c20d6fa6c9cc3eb826989da3a22d934:
Make sure that argv[] argument pointers are not modified. (2010-07-04 23:55:42
+0200)
are available in the git repository at:
git://git.denx.de/u-boot-pxa.git next

Quoted 8 lines

I cannot make head nor tail of the next/next branch references.
What am I supposed to do with that? There is no next branch ATM.
Quoted 2 lines
Compulab uboot (1):
PXA: PXA3xx NAND Driver
This has to go through the NAND custodian.

I've provided comments on this patch.

Quoted 7 lines

Quoted 5 lines
Marek Vasut (4):
Enable PXAFB for PXA27X and PXA3XX
PXA: Add hardware init helper macros
PXA: Add PWM2 and PWM3 regs to pxa-regs.h
PXA: Add OneNAND booting support to start.S
Ditto.

This one is just touching ARM init code. It isn't really NAND stuff (or OneNAND, for that matter), NAND boot (or other such multistage booting) is just the motivation for it.

-Scott

Wolfgang Denk

2010-07-14 20:43 UTC #3 lore raw

Dear Scott Wood,

Quoted 4 lines · In message <[email protected]> you wrote:

Quoted 2 lines
This has to go through the NAND custodian.
I've provided comments on this patch.

Sorry if I missed this.

Quoted 3 lines

This one is just touching ARM init code. It isn't really NAND stuff (or OneNAND, for that matter), NAND boot (or other such multistage booting) is just the motivation for it.

OK. But then, I do not see your Acked-By: message in Marex' tree...

Best regards,

Wolfgang Denk

Signature · 5 lines

DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
If you think the problem is bad now, just wait until we've solved it.
                                                        Epstein's Law

Scott Wood

Acked-by

2010-07-14 20:51 UTC #4 lore raw

Quoted 9 lines · On Wed, 14 Jul 2010 22:43:49 +0200 Wolfgang Denk <[email protected]> wrote:

Dear Scott Wood,
Quoted 4 lines · In message <[email protected]> you wrote:
Quoted 2 lines
This has to go through the NAND custodian.
I've provided comments on this patch.
Sorry if I missed this.

http://lists.denx.de/pipermail/u-boot/2010-July/073761.html

Quoted 5 lines

Quoted 3 lines
This one is just touching ARM init code. It isn't really NAND stuff (or OneNAND, for that matter), NAND boot (or other such multistage booting) is just the motivation for it.
OK. But then, I do not see your Acked-By: message in Marex' tree...

OK, here it is:

Acked-by Scott Wood <[email protected]>

-Scott

Marek Vasut

author

2010-07-14 20:54 UTC #5 lore raw

In reply to Scott Wood

Dne St 14. ?ervence 2010 21:31:51 Scott Wood napsal(a):

Quoted 13 lines

On Wed, 14 Jul 2010 21:18:48 +0200
Quoted 10 lines · Wolfgang Denk
Dear Marek Vasut,
Quoted 7 lines · In message <[email protected]> you wrote:
Hey, these are some additions and fixes. This is against u-boot.git master branch. Please pull, thanks.
-----------------------------------------------------------------------
--------
The following changes since commit

54841ab50c20d6fa6c9cc3eb826989da3a22d934:

Quoted 25 lines

Quoted 8 lines
Quoted 7 lines
Make sure that argv[] argument pointers are not modified. (2010-07-04 23:55:42
+0200)
are available in the git repository at:
git://git.denx.de/u-boot-pxa.git next
Quoted 8 lines
I cannot make head nor tail of the next/next branch references.
What am I supposed to do with that? There is no next branch ATM.
Quoted 2 lines
Compulab uboot (1):
PXA: PXA3xx NAND Driver
This has to go through the NAND custodian.
I've provided comments on this patch.
Quoted 6 lines
Quoted 5 lines
Marek Vasut (4):
Enable PXAFB for PXA27X and PXA3XX
PXA: Add hardware init helper macros
PXA: Add PWM2 and PWM3 regs to pxa-regs.h
PXA: Add OneNAND booting support to start.S

Quoted 5 lines

Quoted 1 line
Ditto.
This one is just touching ARM init code. It isn't really NAND stuff (or OneNAND, for that matter), NAND boot (or other such multistage booting) is just the motivation for it.

Can I get a formal Ack on this then? Thanks

Quoted 2 lines

-Scott

Marek Vasut

author

2010-07-14 20:57 UTC #6 lore raw

Dne St 14. ?ervence 2010 22:54:55 Marek Vasut napsal(a):

Quoted 41 lines

Dne St 14. ?ervence 2010 21:31:51 Scott Wood napsal(a):
Quoted 13 lines
On Wed, 14 Jul 2010 21:18:48 +0200
Quoted 10 lines · Wolfgang Denk
Dear Marek Vasut,
Quoted 7 lines · In message <[email protected]> you wrote:
Hey, these are some additions and fixes. This is against u-boot.git master branch. Please pull, thanks.
---------------------------------------------------------------------
-- --------
The following changes since commit
54841ab50c20d6fa6c9cc3eb826989da3a22d934:
Quoted 25 lines
Quoted 8 lines
Quoted 7 lines
Make sure that argv[] argument pointers are not modified. (2010-07-04 23:55:42
+0200)
are available in the git repository at:
git://git.denx.de/u-boot-pxa.git next
Quoted 8 lines
I cannot make head nor tail of the next/next branch references.
What am I supposed to do with that? There is no next branch ATM.
Quoted 2 lines
Compulab uboot (1):
PXA: PXA3xx NAND Driver
This has to go through the NAND custodian.
I've provided comments on this patch.
Quoted 6 lines
Quoted 5 lines
Marek Vasut (4):
Enable PXAFB for PXA27X and PXA3XX
PXA: Add hardware init helper macros
PXA: Add PWM2 and PWM3 regs to pxa-regs.h
PXA: Add OneNAND booting support to start.S

Quoted 7 lines

Quoted 5 lines
Quoted 1 line
Ditto.
This one is just touching ARM init code. It isn't really NAND stuff (or OneNAND, for that matter), NAND boot (or other such multistage booting) is just the motivation for it.
Can I get a formal Ack on this then? Thanks

please ignore this

Quoted 2 lines

Quoted 2 lines
-Scott