Too Much Email
Moran
How can I go about configuring u-boot email to only send emails that pertain to a response to my question?
Thanks
Jack
John M Moran
General Dynamics C4S
77 "A" St.
Needham, MA, 02494
Phone: 781-455-4071
Email: jack.moran at gdc4s.com
Dear "Moran, Jack",
Quoted 3 lines · In message <[email protected]> you…
How can I go about configuring u-boot email to only send emails that pertain to a response to my question?
You cannot. This is a mailing list.
If you don;t want to receive thelist messages, you can always unsubscribe.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de There are two ways to write error-free programs. Only the third one works.
Hello Moran, Jack,
Am 2010-07-18 09:08:05, hacktest Du folgendes herunter:
Quoted 2 lines
How can I go about configuring u-boot email to only send emails that pertain to a response to my question?
You can't.
But maybe you setup a local filter (procmail, maildrop, sieve, ...) and filter <u-boot> messages to a seperated folder?
Thanks, Greetings and nice Day/Evening
Michelle Konzack
Signature · 26 lines
##################### Debian GNU/Linux Consultant ###################### Development of Intranet and Embedded Systems with Debian GNU/Linux itsystems at tdnet France EURL itsystems at tdnet UG (limited liability) Owner Michelle Konzack Owner Michelle Konzack Apt. 917 (homeoffice) 50, rue de Soultz Kinzigstra?e 17 67100 Strasbourg/France 77694 Kehl/Germany Tel: +33-6-61925193 mobil Tel: +49-177-9351947 mobil Tel: +33-9-52705884 fix <http://www.itsystems.tamay-dogan.net/> <http://www.flexray4linux.org/> <http://www.debian.tamay-dogan.net/> <http://www.can4linux.org/> Jabber linux4michelle at jabber.ccc.de ICQ #328449886 Linux-User #280138 with the Linux Counter, http://counter.li.org/ -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: Digital signature Url : http://lists.denx.de/pipermail/u-boot/attachments/20100718/254f430d/attachment.pgp
Hi Moran.
create one message filter in your email client. :)
Quoted 23 lines · Jack
How can I go about configuring u-boot email to only send emails that pertain to a response to my question?
Thanks
JackJohn M Moran
General Dynamics C4S
77 "A" St.
Needham, MA, 02494
Phone: 781-455-4071
Email: jack.moran at gdc4s.com_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Signature · 3 lines
Best Regards Xiangfu Liu http://www.openmobilefree.net
PATCH 1/1 MX51EVK: fix return value of get_timer_masked
In reply to Moranget_timer_masked() should return current timestamp, not current ticks from hardware register.
Tested on one custom board with NAND flash.
Without this patch, NAND write always TIMEOUT
because get_timer(0) return a big value.
This patch applies for u-boot-2010.06
--- arch/arm/cpu/arm_cortexa8/mx51/timer.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/cpu/arm_cortexa8/mx51/timer.c +1 -1
@@ -89,7 +89,7 @@ ulong get_timer_masked(void) timestamp += ((0xFFFFFFFF / (CONFIG_MX51_CLK32 /CONFIG_SYS_HZ )) - lastinc) + val; lastinc = val; -return val; +return timestamp; }ulong get_timer (ulong base)
Signature · 24 lines
1.6.5.2 -- ??? ?????? ??????????????? ???????????2???????5?5???? Tel?+86-755-86185111-3667 Email?hbli at sinocastel.com Website?www.sinocastel.com ???????????????????????????????????? ???????????????????????????????????? ???????????????????????????????????? ?????????????????? This e-mail and its attachments contain confidential information from Shenzhen CASTEL Wireless Telecommunications Co., Ltd., Which is intended only for the person or entity whose address is listed above. Any use of theinformation contained herein in any way (Including, but not limited to, total or partial disclosure,reproduction, or dissemination) by persons other than the Intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!
PATCH 1/1 MX51EVK: fix return value of get_timer_masked
Dear Stefano,
Quoted 7 lines · In message <1279714212.2643.32.camel@localhost> Li Haibo wrote:
get_timer_masked()should return current timestamp, not current ticks from hardware register.Tested on one custom board with NAND flash. Without this patch, NAND write always TIMEOUT because
get_timer(0)return a big value.
Quoted 6 lines
This patch applies for u-boot-2010.06
Signed-off-by Li Haibo <[email protected]>--- arch/arm/cpu/arm_cortexa8/mx51/timer.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
Can you please have a look at this, and eventually send a pull req? Thanks.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de At the source of every error which is blamed on the computer you will find at least two human errors, including the error of blaming it on the computer.
PATCH 1/1 MX51EVK: fix return value of get_timer_masked
Quoted 2 lines · Wolfgang Denk
Dear Stefano,
Hi Wolfgang,
Quoted 2 lines
Can you please have a look at this, and eventually send a pull req? Thanks.
Thanks, I missed it. I would change the name of the maintainer and I will set myself for the MX51EVK, because Fred Fan resigned as maintainer for this board.
Li, could you please resend your patch as text ? It was sent as base-64 encoded, and I cannot directly apply it.
Thanks,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office at denx.de =====================================================================
PATCH 1/1 MX51EVK: fix return value of get_timer_masked
Quoted 13 lines
Quoted 2 lines · Wolfgang Denk
Dear Stefano,
Hi Wolfgang,
Quoted 2 lines
Can you please have a look at this, and eventually send a pull req? Thanks.
Thanks, I missed it. I would change the name of the maintainer and I will set myself for the MX51EVK, because Fred Fan resigned as maintainer for this board.
Quoted 7 lines
Li, could you please resend your patch as text ? It was sent as base-64 encoded, and I cannot directly apply it.
Thanks,
Stefano Babic
get_timer_masked() should return current timestamp, not current ticks from hardware register.
Tested on one custom board with NAND flash.
Without this patch, NAND write always TIMEOUT
because get_timer(0) return a big value.
This patch applies for u-boot-2010.06
--- arch/arm/cpu/arm_cortexa8/mx51/timer.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/cpu/arm_cortexa8/mx51/timer.c +1 -1
@@ -89,7 +89,7 @@ ulong get_timer_masked(void) timestamp += ((0xFFFFFFFF / (CONFIG_MX51_CLK32 /CONFIG_SYS_HZ )) - lastinc) + val; lastinc = val; -return val; +return timestamp; }ulong get_timer (ulong base)
Signature · 18 lines
1.6.5.2 -- Li HaiBo Tel?+86-755-86185111-3667 Email?hbli at sinocastel.com Website?www.sinocastel.com This e-mail and its attachments contain confidential information from Shenzhen CASTEL Wireless Telecommunications Co., Ltd., Which is intended only for the person or entity whose address is listed above. Any use of theinformation contained herein in any way (Including, but not limited to, total or partial disclosure,reproduction, or dissemination) by persons other than the Intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!
PATCH 1/1 MX51EVK: fix return value of get_timer_masked
In reply to Stefano BabicQuoted 13 lines
Quoted 2 lines · Wolfgang Denk
Dear Stefano,
Hi Wolfgang,
Quoted 2 lines
Can you please have a look at this, and eventually send a pull req? Thanks.
Thanks, I missed it. I would change the name of the maintainer and I will set myself for the MX51EVK, because Fred Fan resigned as maintainer for this board.
Quoted 7 lines
Li, could you please resend your patch as text ? It was sent as base-64 encoded, and I cannot directly apply it.
Thanks,
Stefano Babic
get_timer_masked() should return current timestamp, not current ticks from hardware register.
Tested on one custom board with NAND flash.
Without this patch, NAND write always TIMEOUT
because get_timer(0) return a big value.
This patch applies for u-boot-2010.06
--- arch/arm/cpu/arm_cortexa8/mx51/timer.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/cpu/arm_cortexa8/mx51/timer.c +1 -1
@@ -89,7 +89,7 @@ ulong get_timer_masked(void) timestamp += ((0xFFFFFFFF / (CONFIG_MX51_CLK32 /CONFIG_SYS_HZ )) - lastinc) + val; lastinc = val; -return val; +return timestamp; }ulong get_timer (ulong base)
Signature · 13 lines
1.6.5.2 -- This e-mail and its attachments contain confidential information from Shenzhen CASTEL Wireless Telecommunications Co., Ltd., Which is intended only for the person or entity whose address is listed above. Any use of theinformation contained herein in any way (Including, but not limited to, total or partial disclosure,reproduction, or dissemination) by persons other than the Intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!
PATCH 1/1 MX51EVK: fix return value of get_timer_masked
Hi Haibo Li
I am try to help on test patch. :)
you should not include the reply in your patch. those reply message will goto git commit message which is not needed.
Quoted 19 lines · Li Haibo
Quoted 19 lines
Quoted 2 lines · Wolfgang Denk
Dear Stefano,
Hi Wolfgang,
Quoted 2 lines
Can you please have a look at this, and eventually send a pull req? Thanks.
Thanks, I missed it. I would change the name of the maintainer and I will set myself for the MX51EVK, because Fred Fan resigned as maintainer for this board.
Li, could you please resend your patch as text ? It was sent as base-64 encoded, and I cannot directly apply it.
Thanks,
Stefano Babic
Signature · 3 lines
Best Regards Xiangfu Liu http://www.openmobilefree.net
PATCH 1/1 MX51EVK: fix return value of get_timer_masked
Quoted 27 lines
Hi Haibo Li
I am try to help on test patch. :)
you should not include the reply in your patch. those reply message will goto git commit message which is not needed.Quoted 19 lines · Li Haibo
Quoted 19 lines
Quoted 2 lines · Wolfgang Denk
Dear Stefano,
Hi Wolfgang,
Quoted 2 lines
Can you please have a look at this, and eventually send a pull req? Thanks.
Thanks, I missed it. I would change the name of the maintainer and I will set myself for the MX51EVK, because Fred Fan resigned as maintainer for this board.
Li, could you please resend your patch as text ? It was sent as base-64 encoded, and I cannot directly apply it.
Thanks,
Stefano Babic
Hi Liu:
Thanks for you help, but I need more :)
I'm newbie to such maillist. I post this small patch to check if everything is OK, but...
There are something I want know:
1. Does "base-64 encoded" problem still exist in this message?
2. Should I follow this thread, or resend a new one?
Signature · 8 lines
This e-mail and its attachments contain confidential information from Shenzhen CASTEL Wireless Telecommunications Co., Ltd., Which is intended only for the person or entity whose address is listed above. Any use of theinformation contained herein in any way (Including, but not limited to, total or partial disclosure,reproduction, or dissemination) by persons other than the Intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!
PATCH 1/1 MX51EVK: fix return value of get_timer_masked
Hi
Quoted 7 lines
Hi Liu:
Thanks for you help, but I need more :)
I'm newbie to such maillist. I post this small patch to check if everything is OK, but...There are something I want know:
1. Does "base-64 encoded" problem still exist in this message?
the last two emails you send are same.
first one is "base-64 encoded"
second is good.
Quoted 2 lines
2. Should I follow this thread, or resend a new one?
I think send a new one title with "[PATCH] v2". you should use "git send-email" to send patch emails.
Signature · 3 lines
Best Regards Xiangfu Liu http://www.openmobilefree.net