Skip to contentSkip to conversation

Documentation: refactor config variable descriptions

RFC PATCH Superseded Thomas Rast 6 participants 14 messages Jun 15, 2016 1 message not in the archive Documentation

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

cover Documentation: refactor config variable descriptions

This little series is a bit of a spinoff from

http://article.gmane.org/gmane.comp.version-control.git/146696
and
http://article.gmane.org/gmane.comp.version-control.git/145139

Since I didn't want to spam the list with 24 RFC emails, I squashed all the manpage-specific patches into one for this submission. You can find the originals at

git://repo.or.cz/git/trast.git t/doc-config-extraction

Judging from its size it's quite possible that

[1/24] Documentation: Move variables from config.txt to separate file

won't make it through to the list, either, and -M doesn't help, so you may have to look it up at the above repository too.

Work so far:

I moved the variables from config.txt and merge-config.txt to a new file, and made a little helper script that expands @@CONFIG(key)@@ in the asciidoc files, driven by the Makefile of course.

I then went over the manpages in the "Main Porcelain Commands" list of git(1) and either (easy case) added a "CONFIGURATION" section with the relevant variables or (hard case) tried to refactor the descriptions so that they are only kept in one place.

Ævar kindly rewrote the Perl script in a more readable and error-safe style, which I squashed for this posting. It's still a separate patch at the above link, too.

Further directions:

I'm a bit hesitant to go in Peff's suggested direction of outright removing all variables from git-config(1). I would prefer to both have the short list and group them by some category system, if that happens to work out. Perhaps the categorized list can eventually be removed once we can verify that all variables are documented in another manpage.

Known omissions/todos:

* git-gc has an elaborate prose section to the same effect that I wasn't quite ready to tear apart yet

* git-notes has excellent custom descriptions from Jonathan's series that I didn't want to refactor

* The description of format.pretty in git-log.txt is unsatisfactory

* check-docs or some other make target should verify that no manpage links to itself

Thomas Rast (3):
Documentation: Move variables from config.txt to separate file
Documentation: Add variable-substitution script
Documentation: include configuration options in manpages

 Documentation/Makefile             |   14 +-
 Documentation/config-vars.txt      | 1761 ++++++++++++++++++++++++++++++++++++
 Documentation/config.txt           | 1693 +----------------------------------
 Documentation/git-add.txt          |    6 +-
 Documentation/git-am.txt           |   18 +
 Documentation/git-archive.txt      |    8 +-
 Documentation/git-branch.txt       |    8 +
 Documentation/git-checkout.txt     |    8 +
 Documentation/git-clean.txt        |    6 +
 Documentation/git-commit.txt       |    7 +
 Documentation/git-diff.txt         |   12 +
 Documentation/git-fetch.txt        |   12 +
 Documentation/git-format-patch.txt |   22 +-
 Documentation/git-grep.txt         |    7 +
 Documentation/git-gui.txt          |   16 +
 Documentation/git-log.txt          |   38 +-
 Documentation/git-merge.txt        |   15 +-
 Documentation/git-pull.txt         |   14 +
 Documentation/git-push.txt         |   19 +
 Documentation/git-rebase.txt       |    5 +-
 Documentation/git-shortlog.txt     |    6 +
 Documentation/git-status.txt       |   18 +-
 Documentation/git-submodule.txt    |    8 +
 Documentation/git-tag.txt          |   11 +-
 Documentation/gitk.txt             |    8 +
 Documentation/merge-config.txt     |   49 -
 Documentation/subst-config.perl    |   74 ++
 27 files changed, 2042 insertions(+), 1821 deletions(-)
 create mode 100644 Documentation/config-vars.txt
 delete mode 100644 Documentation/merge-config.txt
 create mode 100755 Documentation/subst-config.perl
Signature · 1 line
1.7.2.349.gd5452
#1 lore raw

PATCH 2/24 Documentation: Add variable-substitution script

The new subst-config.perl is run by the Makefile as

./subst-config.perl <vars> <in> <out>

It first reads <vars> for variable-documenting blocks. A line consisting of '<name>::' starts the block for <name>, except inside a '--' delimited block (which is used to generate sub-lists). A block extends until the first blank line, which is what asciidoc also looks for.

Then it copies from <in> to <out>, substituting lines of the form

@@CONFIG(<name>)@@

with the documentation block for <name>.

Ævar kindly implemented the following, squashed into this patch:

- Print a usage message when argument prerequisites aren't met
- Use Getopt::Long instead of manually looking at @ARGV
- use warnings, not -w
- Split the parsing & substituting functionality into subroutines

---
 Documentation/Makefile          |   14 +++++---
 Documentation/config-vars.txt   |    1 +
 Documentation/subst-config.perl |   74 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 84 insertions(+), 5 deletions(-)
 create mode 100755 Documentation/subst-config.perl
Documentation/Makefile +9 -5
index a4c4063..c20d580 100644
@@ -239,12 +239,16 @@ cmd-list.made: cmd-list.perl ../command-list.txt $(MAN1_TXT)
 clean:
 	$(RM) *.xml *.xml+ *.html *.html+ *.1 *.5 *.7
 	$(RM) *.texi *.texi+ *.texi++ git.info gitman.info
+	$(RM) *.txt.cv
 	$(RM) howto-index.txt howto/*.html doc.dep
 	$(RM) technical/api-*.html technical/api-index.txt
 	$(RM) $(cmds_txt) *.made
 	$(RM) manpage-base-url.xsl
 
-$(MAN_HTML): %.html : %.txt
+%.txt.cv : %.txt subst-config.perl config-vars.txt
+	$(QUIET_GEN) ./subst-config.perl --varlist=config-vars.txt --input=$< --output=$@
+
+$(patsubst %.txt,%.txt.cv,$(MAN_HTML)): %.html : %.txt.cv
 	$(QUIET_ASCIIDOC)$(RM) $@+ $@ && \
 	$(ASCIIDOC) -b xhtml11 -d manpage -f asciidoc.conf \
 		$(ASCIIDOC_EXTRA) -agit_version=$(GIT_VERSION) -o $@+ $< && \
@@ -257,13 +261,13 @@ manpage-base-url.xsl: manpage-base-url.xsl.in
 	$(QUIET_XMLTO)$(RM) $@ && \
 	xmlto -m $(MANPAGE_XSL) $(XMLTO_EXTRA) man $<
 
-%.xml : %.txt
+%.xml : %.txt.cv
 	$(QUIET_ASCIIDOC)$(RM) $@+ $@ && \
 	$(ASCIIDOC) -b docbook -d manpage -f asciidoc.conf \
 		$(ASCIIDOC_EXTRA) -agit_version=$(GIT_VERSION) -o $@+ $< && \
 	mv $@+ $@
 
-user-manual.xml: user-manual.txt user-manual.conf
+user-manual.xml: user-manual.txt.cv user-manual.conf
 	$(QUIET_ASCIIDOC)$(RM) $@+ $@ && \
 	$(ASCIIDOC) $(ASCIIDOC_EXTRA) -b docbook -d book -o $@+ $< && \
 	mv $@+ $@
@@ -320,8 +324,8 @@ howto-index.txt: howto-index.sh $(wildcard howto/*.txt)
 	'$(SHELL_PATH_SQ)' ./howto-index.sh $(wildcard howto/*.txt) >$@+ && \
 	mv $@+ $@
 
-$(patsubst %,%.html,$(ARTICLES)) : %.html : %.txt
-	$(QUIET_ASCIIDOC)$(ASCIIDOC) $(ASCIIDOC_EXTRA) -b xhtml11 $*.txt
+$(patsubst %,%.html,$(ARTICLES)) : %.html : %.txt.cv
+	$(QUIET_ASCIIDOC)$(ASCIIDOC) $(ASCIIDOC_EXTRA) -b xhtml11 $*.txt.cv
 
 WEBDOC_DEST = /pub/software/scm/git/docs
 
Documentation/config-vars.txt +1 -0
index b82fada..3fcefe9 100644
@@ -689,6 +689,7 @@ diff.mnemonicprefix::
 	standard "a/" and "b/" depending on what is being compared.  When
 	this configuration is in effect, reverse diff output also swaps
 	the order of the prefixes:
+
 diff.noprefix::
 	If set, 'git diff' does not show any source or destination prefix.
 `git diff`;;
Documentation/subst-config.perl new file +74 -0

74 lines not on this page · raw message

Signature · 1 line
1.7.2.349.gd5452
Acked-by on v1 2/24
#2 lore raw

Re: [PATCH 2/24] Documentation: Add variable-substitution script

Quoted 8 lines · Thomas Rast

./subst-config.perl <vars> <in> <out>

It first reads <vars> for variable-documenting blocks. A line consisting of '<name>::' starts the block for <name>, except inside a '--' delimited block (which is used to generate sub-lists). A block extends until the first blank line, which is what asciidoc also looks for.

Quoted 5 lines

Then it copies from <in> to <out>, substituting lines of the form

@@CONFIG(<name>)@@

with the documentation block for <name>.

Neat. Thanks for picking this up.

I would like to make the git-config(1) man page more like the command list in git(1) and less like a concatenation of CONFIGURATION sections, but regardless, this is a good first step.

Documentation/config-vars.txt diff.mnemonicprefix:: · line 695

Quoted 12 lines
Documentation/config-vars.txt +1 -0
index b82fada..3fcefe9 100644
@@ -689,6 +689,7 @@ diff.mnemonicprefix::
 	standard "a/" and "b/" depending on what is being compared.  When
 	this configuration is in effect, reverse diff output also swaps
 	the order of the prefixes:
+
 diff.noprefix::
 	If set, 'git diff' does not show any source or destination prefix.
 `git diff`;;

Does this have an effect on the resulting markup? It looks like an independent syntax fix.

Quoted 2 lines

+++ b/Documentation/subst-config.perl

Documentation/config-vars.txt +0 -0
@@ -0,0 +1,74 @@

[...]

Documentation/config-vars.txt

Quoted 4 lines
Documentation/config-vars.txt +4 -0
+if (!$rc or (!-r $varlist or !-r $input)) {
+    print "$0 --varlist=<varlist> --input=<in> --output=<out>\n";
+    exit 1;
+}

So the commit message is out of date (the new usage is more clear, anyway).

Quoted 1 line

+%.txt.cv : %.txt subst-config.perl config-vars.txt

The asciidoc markup is supposed to itself be suitable documentation. Maybe eventually we will have to drop that pretence and generate .txt files at build time.

#3 lore raw

Re: [PATCH 2/24] Documentation: Add variable-substitution script

Quoted 5 lines · Jonathan Nieder

Thomas Rast wrote:

I would like to make the git-config(1) man page more like the command list in git(1) and less like a concatenation of CONFIGURATION sections, but regardless, this is a good first step.

Yeah, I think git-config(1) shouldn't have the huge listing either, but that's something for a later series to tackle.

Quoted 10 lines
Quoted 2 lines

+++ b/Documentation/subst-config.perl

(quoted diff) +0 -0
@@ -0,0 +1,74 @@

[...]

Documentation/subst-config.perl line 18

Quoted 4 lines
Documentation/subst-config.perl new file +4 -0
+if (!$rc or (!-r $varlist or !-r $input)) {
+    print "$0 --varlist=<varlist> --input=<in> --output=<out>\n";
+    exit 1;
+}

So the commit message is out of date (the new usage is more clear, anyway).

The history makes more sense in Thomas's git repository. I changed the usage in a later commit, but that commit was squashed.

#4 lore raw

Re: [PATCH 2/24] Documentation: Add variable-substitution script

In reply to Thomas Rast
Quoted 23 lines · Thomas Rast
Documentation/subst-config.perl new file +17 -0
new file mode 100755
index 0000000..a981670
@@ -0,0 +1,74 @@
+#!/usr/bin/perl
+use 5.006002;
+use strict;
+use warnings;
+use Getopt::Long;
+
+Getopt::Long::Configure qw/ pass_through /;
+
+my $rc = GetOptions(
+    "varlist=s" => \my $varlist,
+    "input=s"   => \my $input,
+    "output=s"  => \my $output,
+);
+
+if (!$rc or (!-r $varlist or !-r $input)) {
+    print "$0 --varlist=<varlist> --input=<in> --output=<out>\n";
+    exit 1;

Documentation/subst-config.perl line 27

Quoted 10 lines
Documentation/subst-config.perl new file +10 -0
+}
+
+my $vars = read_varlist($varlist);                       # [1]
+substitute_variables($vars, $input, $output);            # [2]
+exit 0;
+
+sub read_varlist {
+    my ($file) = @_;
+
+    open my $fh, "<", $varlist or die "cannot open $varlist: $!";

NITPICK

You are passing global variable $varlist to this function as parameter $file, see place marked [1]. Why don't you use there $file instead of $varlist? Alternatively, why don't you name parameter as $varlist?

Documentation/subst-config.perl line 57

Quoted 5 lines
Documentation/subst-config.perl new file +5 -0
+sub substitute_variables {
+    my ($varlist, $in, $out) = @_;
+
+    open my $infh, "<", $input or die "Can't open $in for reading: $!";
+    open my $outfh, ">", $output or die "Can't open $out for reading: $!";

Same here: $input or $in, $output or $out?

Quoted 7 lines
Documentation/subst-config.perl new file +7 -0
+
+    while (<$infh>) {
+        if (/^\@\@CONFIG\((\S+)\)\@\@$/) {
+            my $v = lc $1;
+            die "Key $v not documented" unless exists $varlist->{$v};
+            print $outfh @{$varlist->{$v}};
+            print $outfh "\n";

Documentation/subst-config.perl line 74

Quoted 10 lines
Documentation/subst-config.perl new file +10 -0
+        } else {
+            print $outfh $_;
+        }
+    }
+
+    close $infh or die "closing input failed: $!";
+    close $outfh or die "closing output failed: $!";
+
+    return;
+}

Also, could you consitently start error messages (in die "sth") with capital letter (upper-case), or with lower-case letter?

Signature · 3 lines
Jakub Narebski
Poland
ShadeHawk on #git
#5 lore raw

Re: [PATCH 2/24] Documentation: Add variable-substitution script

On Mon, Jul 26, 2010 at 21:17, Jakub Narebski <[email protected]> wrote:

Well caught. Those were on me, here's the fixed up version (in my branch, which Thomas can pull in to his):

#!/usr/bin/perl
use 5.006002;
use strict;
use warnings;
use Getopt::Long;

Getopt::Long::Configure qw/ pass_through /;

my $rc = GetOptions(

	"varlist=s" => \my $varlist,
	"input=s"	=> \my $input,
	"output=s"	=> \my $output,

);

if (!$rc or (!-r $varlist or !-r $input)) {
	print "$0 --varlist=<varlist> --input=<in> --output=<out>\n";
	exit 1;
}

my $vars = read_varlist($varlist);
substitute_variables($vars, $input, $output);
exit 0;

sub read_varlist {
	my ($file) = @_;

	open my $fh, "<", $file or die "Can't open $file: $!";
	my %vars;

	my ($v, $last_v);
	my $in_block = 0;
	while (<$fh>) {
		if (/^(\S+)::/) {
			$v = lc $1;
			$in_block = 0;
			push @{$vars{$v}}, $_;
		} elsif (/^$/ && !$in_block) {
			if (defined $last_v && !$#{$vars{$last_v}}) {
				$vars{$last_v} = $vars{$v};
			}
			$last_v = $v;
		} elsif (defined $v) {
			push @{$vars{$v}}, $_;
			$in_block = !$in_block if /^--$/;
		}
	}

	close $fh or die "Closing $file failed: $!";

	return \%vars
}
sub substitute_variables {
	my ($varlist, $in, $out) = @_;

	open my $infh, "<", $in or die "Can't open $in: $!";
	open my $outfh, ">", $out or die "Can't open $out: $!";

	while (<$infh>) {
		if (/^\@\@CONFIG\((\S+)\)\@\@$/) {
			my $v = lc $1;
			die "Key $v not documented" unless exists $varlist->{$v};
			print $outfh @{$varlist->{$v}};
			print $outfh "\n";
		} else {
			print $outfh $_;
		}
	}

	close $infh or die "Closing $in failed: $!";
	close $outfh or die "Closing $out failed: $!";

	return;
}

A message that is not in the archive (sent off-list or not yet received): 75c9db91f5ab43ebb60cace0d20389462a2ab02c.1280169048.git.trast@student.ethz.ch

#7 lore raw

Re: [PATCH 1/24] Documentation: Move variables from config.txt to separate file

Quoted 2 lines · Thomas Rast
 Documentation/config-vars.txt | 1691 ++++++++++++++++++++++++++++++++++++++++
 Documentation/config.txt      | 1693 +----------------------------------------

Scary. Does -B -M -C -C -C make it any better?

#8 lore raw

Re: [PATCH 1/24] Documentation: Move variables from config.txt to separate file

Quoted 6 lines · Jonathan Nieder
Quoted 2 lines · Thomas Rast

 Documentation/config-vars.txt | 1691 ++++++++++++++++++++++++++++++++++++++++ Documentation/config.txt      | 1693 +----------------------------------------

Scary.  Does -B -M -C -C -C make it any better?

It makes it even scarier:

 Documentation/{config.txt => config-vars.txt} |  223 ++--
 Documentation/config.txt                      | 1923 ++-----------------------
#9 lore raw

Re: [PATCH 1/24] Documentation: Move variables from config.txt to separate file

Heya,

Quoted 4 lines · Ævar Arnfjörð Bjarmason
Quoted 1 line · Jonathan Nieder

Scary.  Does -B -M -C -C -C make it any better?

It makes it even scarier:

So, should we somehow allow the user to tell us that yes, really, we want to treat these two files as a move for the purpose of generating a patch diff?

Signature · 3 lines
Cheers,

Sverre Rabbelier
#10 lore raw

Re: [PATCH 1/24] Documentation: Move variables from config.txt to separate file

In reply to Ævar Arnfjörð Bjarmason
Quoted 6 lines · Ævar Arnfjörð Bjarmason
Quoted 5 lines · Jonathan Nieder
Quoted 2 lines · Thomas Rast

 Documentation/config-vars.txt | 1691 ++++++++++++++++++++++++++++++++++++++++

 Documentation/config.txt      | 1693 +----------------------------------------
Quoted 6 lines
Quoted 1 line

Scary. Does -B -M -C -C -C make it any better?

It makes it even scarier:

 Documentation/{config.txt => config-vars.txt} |  223 ++--
 Documentation/config.txt                      | 1923 ++-----------------------

Is it scary?

If bulk of config.txt has been moved to config-vars.txt, but either lines the moved to config-vars.txt have further edits or more lines have been added to the file, while the remainder of config.txt had some other changes, the above two is more or less exactly what I would expect to see.

Acked-by on the v1 series
#11 lore raw
In reply to Thomas Rast
Quoted 26 lines · Thomas Rast

This little series is a bit of a spinoff from

 http://article.gmane.org/gmane.comp.version-control.git/146696
and
 http://article.gmane.org/gmane.comp.version-control.git/145139

Since I didn't want to spam the list with 24 RFC emails, I squashed all the manpage-specific patches into one for this submission.  You can find the originals at

 git://repo.or.cz/git/trast.git t/doc-config-extraction

Judging from its size it's quite possible that

 [1/24] Documentation: Move variables from config.txt to separate file

won't make it through to the list, either, and -M doesn't help, so you may have to look it up at the above repository too.

Work so far:

I moved the variables from config.txt and merge-config.txt to a new file, and made a little helper script that expands @@CONFIG(key)@@ in the asciidoc files, driven by the Makefile of course.

Quoted 8 lines

I then went over the manpages in the "Main Porcelain Commands" list of git(1) and either (easy case) added a "CONFIGURATION" section with the relevant variables or (hard case) tried to refactor the descriptions so that they are only kept in one place.

Ævar kindly rewrote the Perl script in a more readable and error-safe style, which I squashed for this posting.  It's still a separate patch at the above link, too.

This whole series does some much needed improvement on config documentation.

Quoted 15 lines

Further directions:

I'm a bit hesitant to go in Peff's suggested direction of outright removing all variables from git-config(1).  I would prefer to both have the short list and group them by some category system, if that happens to work out.  Perhaps the categorized list can eventually be removed once we can verify that all variables are documented in another manpage.

Known omissions/todos:

* git-gc has an elaborate prose section to the same effect that I wasn't quite ready to tear apart yet

Quoted 7 lines

* git-notes has excellent custom descriptions from Jonathan's series that I didn't want to refactor

* The description of format.pretty in git-log.txt is unsatisfactory

* check-docs or some other make target should verify that no manpage links to itself

All these can be done later.

#12 lore raw
In reply to Thomas Rast
Quoted 1 line · Thomas Rast

This little series is a bit of a spinoff from

Here are some minor but needed fixups (also in my branch at
http://github.com/avar/git/compare/t/doc-config-extraction)

From 522a0e384c1e8b29339aecb8cbf0cccdf42ce3ce Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?=C3=86var=20Arnfj=C3=B6r=C3=B0=20Bjarmason?= <[email protected]>
Date: Mon, 26 Jul 2010 21:56:30 +0000
Subject: [PATCH 1/2] gitignore: Add *.cv files made by var substitution script
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Ignore the *.cv files being generated as of the "Documentation: Add variable-substitution script" commit.

---
 Documentation/.gitignore |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
Documentation/.gitignore +1 -0
index 1c3a9fe..623f1d1 100644
@@ -3,6 +3,7 @@
 *.[1-8]
 *.made
 *.texi
+*.cv
 git.info
 gitman.info
 howto-index.txt
Signature · 26 lines
1.7.1


From 2cdb7349fd65b246cdd01cfcd7444ed3c5e6120b Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?=C3=86var=20Arnfj=C3=B6r=C3=B0=20Bjarmason?= <[email protected]>
Date: Mon, 26 Jul 2010 22:20:48 +0000
Subject: [PATCH 2/2] Documentation/Makefile: Specify -f user-manual.conf
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The user-manual.xml target was broken in the "Add
variable-substitution script" commit.

It broke because asciidoc(1) will implicitly search a configuration
file alongsite the .txt file it's generating, but that didn't work
with the preprocessed .txt.cv file (which would need a
user-manual.txt.conf file)

Fix that by specifying the path to the config file explicitly like the
other asciidoc invocations do.

Signed-off-by: Ævar Arnfjörð Bjarmason <[email protected]>
---
 Documentation/Makefile |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)
Documentation/Makefile +0 -1
index c20d580..8b1e797 100644
@@ -269,7 +269,8 @@ manpage-base-url.xsl: manpage-base-url.xsl.in
 
 user-manual.xml: user-manual.txt.cv user-manual.conf
                  $(QUIET_ASCIIDOC)$(RM) $@+ $@ && \
-                 $(ASCIIDOC) $(ASCIIDOC_EXTRA) -b docbook -d book -o

$@+ $< && \
+ $(ASCIIDOC) $(ASCIIDOC_EXTRA) -b docbook -d book -f
user-manual.conf \

+                             -o $@+ $< && \
                              mv $@+ $@

technical/api-index.txt: technical/api-index-skel.txt \

Signature · 1 line
1.7.1
#13 lore raw

PATCH 1/1 Documentation: include configuration options in manpages

In reply to Thomas Rast

This is a squash of 22 commits. You can find their originals at

git://repo.or.cz/git/trast.git t/doc-config-extraction

---
 Documentation/config-vars.txt      |  107 +++++++++++++++++++++++++++++------
 Documentation/git-add.txt          |    6 +-
 Documentation/git-am.txt           |   18 ++++++
 Documentation/git-archive.txt      |    8 +--
 Documentation/git-branch.txt       |    8 +++
 Documentation/git-checkout.txt     |    8 +++
 Documentation/git-clean.txt        |    6 ++
 Documentation/git-commit.txt       |    7 ++
 Documentation/git-diff.txt         |   12 ++++
 Documentation/git-fetch.txt        |   12 ++++
 Documentation/git-format-patch.txt |   22 ++++++-
 Documentation/git-grep.txt         |    7 ++
 Documentation/git-gui.txt          |   16 +++++
 Documentation/git-log.txt          |   38 ++-----------
 Documentation/git-merge.txt        |   15 +++--
 Documentation/git-pull.txt         |   14 +++++
 Documentation/git-push.txt         |   19 ++++++
 Documentation/git-rebase.txt       |    5 +-
 Documentation/git-shortlog.txt     |    6 ++
 Documentation/git-status.txt       |   18 ++----
 Documentation/git-submodule.txt    |    8 +++
 Documentation/git-tag.txt          |   11 +---
 Documentation/gitk.txt             |    8 +++
 Documentation/merge-config.txt     |   49 ----------------
 24 files changed, 284 insertions(+), 144 deletions(-)
 delete mode 100644 Documentation/merge-config.txt
Documentation/config-vars.txt +88 -19
index 3fcefe9..0ae80be 100644
@@ -426,7 +426,9 @@ core.sparseCheckout::
 add.ignore-errors::
 	Tells 'git add' to continue adding files when some files cannot be
 	added due to indexing errors. Equivalent to the '--ignore-errors'
-	option of linkgit:git-add[1].
+	option
+ifdef::git-config[of linkgit:git-add[1].]
+ifndef::git-config[.]
 
 alias.*::
 	Command aliases for the linkgit:git[1] command wrapper - e.g.
@@ -1137,8 +1139,11 @@ i18n.commitEncoding::
 	porcelains). See e.g. linkgit:git-mailinfo[1]. Defaults to 'utf-8'.
 
 i18n.logOutputEncoding::
-	Character encoding the commit messages are converted to when
-	running 'git log' and friends.
+	Encoding to use when displaying logs.
+ifdef::git-log[(See "Discussion", above.)]
+ifndef::git-log[See "Discussion" in linkgit:git-log[1].]
+	Defaults to the value of `i18n.commitEncoding` if set, UTF-8
+	otherwise.
 
 imap::
 	The configuration variables in the 'imap' section are described
@@ -1175,10 +1180,11 @@ interactive.singlekey::
 	ignored if portable keystroke input is not available.
 
 log.date::
-	Set default date-time mode for the log command. Setting log.date
-	value is similar to using 'git log'\'s --date option. The value is one of the
-	following alternatives: {relative,local,default,iso,rfc,short}.
-	See linkgit:git-log[1].
+	Default date-time mode for the log family. The value must be
+	one of {relative,local,default,iso,rfc,short}. Defaults to
+	"default".  See the `\--date` option
+ifdef::git-log[above.]
+ifndef::git-log[in linkgit:git-log[1].]
 
 log.decorate::
 	Print out the ref names of any commits that are shown by the log
@@ -1188,10 +1194,16 @@ log.decorate::
 	This is the same as the log commands '--decorate' option.
 
 log.showroot::
-	If true, the initial commit will be shown as a big creation event.
-	This is equivalent to a diff against an empty tree.
-	Tools like linkgit:git-log[1] or linkgit:git-whatchanged[1], which
-	normally hide the root commit will now show it. True by default.
+	If enabled, the initial commit will be shown as a big creation
+	event (equivalent to a diff against an empty tree).  Otherwise
+	it has an empty diff. Enabled by default.
+
+mailinfo.scissors::
+	When splitting the patch out of an email, remove everything in
+	body before a scissors line, if such a line is found.  A
+	scissors line is a line that mainly consists of scissors
+	(either ">8" or "8<") and perforation (dash "-") marks.
+	See the `\--scissors` option in linkgit:git-mailinfo.txt[].
 
 mailmap.file::
 	The location of an augmenting mailmap file. The default
@@ -1199,7 +1211,9 @@ mailmap.file::
 	first, then the mailmap file pointed to by this variable.
 	The location of the mailmap file may be in a repository
 	subdirectory, or somewhere outside of the repository itself.
+ifdef::git-config[]
 	See linkgit:git-shortlog[1] and linkgit:git-blame[1].
+endif::git-config[]
 
 man.viewer::
 	Specify the programs that may be used to display help in the
@@ -1214,7 +1228,55 @@ man.<tool>.path::
 	Override the path for the given tool that may be used to
 	display help in the 'man' format. See linkgit:git-help[1].
 
-include::merge-config.txt[]
+merge.conflictstyle::
+	Specify the style in which conflicted hunks are written out to
+	working tree files upon merge.  The default is "merge", which
+	shows a `<<<<<<<` conflict marker, changes made by one side,
+	a `=======` marker, changes made by the other side, and then
+	a `>>>>>>>` marker.  An alternate style, "diff3", adds a `|||||||`
+	marker and the original text before the `=======` marker.
+
+merge.log::
+	Whether to include summaries of merged commits in newly created
+	merge commit messages. False by default.
+
+merge.renameLimit::
+	The number of files to consider when performing rename detection
+	during a merge; if not specified, defaults to the value of
+	diff.renameLimit.
+
+merge.stat::
+	Whether to print the diffstat between ORIG_HEAD and the merge result
+	at the end of the merge.  True by default.
+
+merge.tool::
+	Controls which merge resolution program is used by
+	linkgit:git-mergetool[1].  Valid built-in values are: "kdiff3",
+	"tkdiff", "meld", "xxdiff", "emerge", "vimdiff", "gvimdiff",
+	"diffuse", "ecmerge", "tortoisemerge", "p4merge", "araxis" and
+	"opendiff".  Any other value is treated is custom merge tool
+	and there must be a corresponding mergetool.<tool>.cmd option.
+
+merge.verbosity::
+	Controls the amount of output shown by the recursive merge
+	strategy.  Level 0 outputs nothing except a final error
+	message if conflicts were detected. Level 1 outputs only
+	conflicts, 2 outputs conflicts and file changes.  Level 5 and
+	above outputs debugging information.  The default is level 2.
+	Can be overridden by the 'GIT_MERGE_VERBOSITY' environment variable.
+
+merge.<driver>.name::
+	Defines a human-readable name for a custom low-level
+	merge driver.  See linkgit:gitattributes[5] for details.
+
+merge.<driver>.driver::
+	Defines the command that implements a custom low-level
+	merge driver.  See linkgit:gitattributes[5] for details.
+
+merge.<driver>.recursive::
+	Names a low-level merge driver to be used when
+	performing an internal merge between common ancestors.
+	See linkgit:gitattributes[5] for details.
 
 mergetool.<tool>.path::
 	Override the path for the given tool.  This is useful in case
@@ -1271,6 +1333,11 @@ globs.
 The effective value of "core.notesRef" (possibly overridden by
 GIT_NOTES_REF) is also implicitly added to the list of refs to be
 displayed.
+ifdef::git-log[]
++
+This setting can be disabled by the `--no-standard-notes` option
+and supplemented by the `--show-notes` option.
+endif::git-log[]
 
 notes.rewrite.<command>::
 	When rewriting commits with <command> (currently `amend` or
@@ -1637,8 +1704,9 @@ tar.umask::
 	This variable can be used to restrict the permission bits of
 	tar archive entries.  The default is 0002, which turns off the
 	world write bit.  The special value "user" indicates that the
-	archiving user's umask will be used instead.  See umask(2) and
-	linkgit:git-archive[1].
+	archiving user's umask will be used instead.  See umask(2)
+ifdef::git-config[and linkgit:git-archive[1].]
+ifndef::git-config[for details.]
 
 transfer.unpackLimit::
 	When `fetch.unpackLimit` or `receive.unpackLimit` are
@@ -1680,11 +1748,12 @@ user.name::
 	environment variables.  See linkgit:git-commit-tree[1].
 
 user.signingkey::
-	If linkgit:git-tag[1] is not selecting the key you want it to
-	automatically when creating a signed tag, you can override the
-	default selection with this variable.  This option is passed
-	unchanged to gpg's --local-user parameter, so you may specify a key
-	using any method that gpg supports.
+	By default, 'git tag -s' (-s) will use your committer identity
+	(of the form "Your Name <[email protected]>") to find a key.
+	If you want to use a different default key, you can override
+	the selection with this variable.  The value is passed
+	unchanged to gpg's --local-user parameter, so you may specify
+	a key using any method that gpg supports.
 
 web.browser::
 	Specify a web browser that may be used by some commands.
Documentation/git-add.txt +2 -4
index e22a62f..da1ac09 100644
@@ -148,10 +148,8 @@ subdirectories.
 Configuration
 -------------
 
-The optional configuration variable `core.excludesfile` indicates a path to a
-file containing patterns of file names to exclude from git-add, similar to
-$GIT_DIR/info/exclude.  Patterns in the exclude file are used in addition to
-those in info/exclude.  See linkgit:gitrepository-layout[5].
+@@CONFIG(add.ignore-errors)@@
+@@CONFIG(core.excludesfile)@@
 
 
 EXAMPLES
Documentation/git-am.txt +18 -0
index 9e62f87..3db8e9d 100644
@@ -185,6 +185,24 @@ commits that is more easily fixed by changing the mailbox (e.g.
 errors in the "From:" lines).
 
 
+CONFIGURATION
+-------------
+
+Variables that affect 'git am' itself:
+
+@@CONFIG(am.keepcr)@@
+@@CONFIG(i18n.commitEncoding)@@
+
+Variables that affect 'git apply', which is used to apply the patches:
+
+@@CONFIG(apply.ignorewhitespace)@@
+@@CONFIG(apply.whitespace)@@
+
+Variables that affect 'git mailinfo':
+
+@@CONFIG(mailinfo.scissors)@@
+
+
 SEE ALSO
 --------
 linkgit:git-apply[1].
Documentation/git-archive.txt +2 -6
index 8d3e666..01a6bc5 100644
@@ -93,12 +93,8 @@ zip
 CONFIGURATION
 -------------
 
-tar.umask::
-	This variable can be used to restrict the permission bits of
-	tar archive entries.  The default is 0002, which turns off the
-	world write bit.  The special value "user" indicates that the
-	archiving user's umask will be used instead.  See umask(2) for
-	details.
+@@CONFIG(tar.umask)@@
+
 
 ATTRIBUTES
 ----------
Documentation/git-branch.txt +8 -0
index 1940256..08ea917 100644
@@ -222,6 +222,14 @@ but different purposes:
 - `--no-merged` is used to find branches which are candidates for merging
   into HEAD, since those branches are not fully contained by HEAD.
 
+
+CONFIGURATION
+-------------
+
+@@CONFIG(branch.autosetupmerge)@@
+@@CONFIG(branch.autosetuprebase)@@
+
+
 SEE ALSO
 --------
 linkgit:git-check-ref-format[1],
Documentation/git-checkout.txt +8 -0
index 1bacd2e..c5d5c03 100644
@@ -299,6 +299,14 @@ $ git add frotz
 ------------
 
 
+CONFIGURATION
+-------------
+
+@@CONFIG(branch.autosetupmerge)@@
+@@CONFIG(branch.autosetuprebase)@@
+@@CONFIG(merge.conflictstyle)@@
+
+
 Author
 ------
 Written by Linus Torvalds <[email protected]>
Documentation/git-clean.txt +6 -0
index a81cb6c..eab8de5 100644
@@ -56,6 +56,12 @@ OPTIONS
 	everything from scratch, but keep manually created files.
 
 
+CONFIGURATION
+-------------
+
+@@CONFIG(clean.requireForce)@@
+
+
 Author
 ------
 Written by Pavel Roskin <[email protected]>
Documentation/git-commit.txt +7 -0
index c28603e..49420cd 100644
@@ -375,6 +375,13 @@ and `post-commit` hooks.  See linkgit:githooks[5] for more
 information.
 
 
+CONFIGURATION
+-------------
+
+@@CONFIG(commit.status)@@
+@@CONFIG(commit.template)@@
+
+
 SEE ALSO
 --------
 linkgit:git-add[1],
Documentation/git-diff.txt +12 -0
index 08fd409..b7dc1e6 100644
@@ -157,6 +157,18 @@ $ git diff -R                          <2>
 rewrites (very expensive).
 <2> Output diff in reverse.
 
+CONFIGURATION
+-------------
+
+@@CONFIG(diff.autorefreshindex)@@
+@@CONFIG(diff.external)@@
+@@CONFIG(diff.mnemonicprefix)@@
+@@CONFIG(diff.noprefix)@@
+@@CONFIG(diff.renameLimit)@@
+@@CONFIG(diff.renames)@@
+@@CONFIG(diff.suppressBlankEmpty)@@
+@@CONFIG(diff.wordRegex)@@
+
 SEE ALSO
 --------
 linkgit:git-difftool[1]::
Documentation/git-fetch.txt +12 -0
index 400fe7f..b0c2027 100644
@@ -76,6 +76,18 @@ The `pu` branch will be updated even if it is does not fast-forward,
 because it is prefixed with a plus sign; `tmp` will not be.
 
 
+CONFIGURATION
+-------------
+
+@@CONFIG(fetch.unpackLimit)@@
+@@CONFIG(core.gitProxy)@@
+@@CONFIG(branch.<name>.remote)@@
+@@CONFIG(branch.<name>.merge)@@
+
+The `remote.<name>.*` configuration options also affect git-fetch as
+discussed above.
+
+
 SEE ALSO
 --------
 linkgit:git-pull[1]
Documentation/git-format-patch.txt +18 -4
index 4b3f5ba..def364f 100644
@@ -211,10 +211,9 @@ you can use `--suffix=-patch` to get `0001-description-of-my-change-patch`.
 
 CONFIGURATION
 -------------
-You can specify extra mail header lines to be added to each message,
-defaults for the subject prefix and file suffix, number patches when
-outputting more than one patch, add "To" or "Cc:" headers, configure
-attachments, and sign off patches with configuration variables.
+
+'git format-patch' has a lot of configuration variables.  A short
+example:
 
 ------------
 [format]
@@ -226,8 +225,23 @@ attachments, and sign off patches with configuration variables.
 	cc = <email>
 	attach [ = mime-boundary-string ]
 	signoff = true
+	signature = "Hello, world!\n"
+	thread = shallow
 ------------
 
+The individual variables are as follows:
+
+@@CONFIG(format.headers)@@
+@@CONFIG(format.subjectprefix)@@
+@@CONFIG(format.suffix)@@
+@@CONFIG(format.numbered)@@
+@@CONFIG(format.to)@@
+@@CONFIG(format.cc)@@
+@@CONFIG(format.attach)@@
+@@CONFIG(format.signoff)@@
+@@CONFIG(format.signature)@@
+@@CONFIG(format.thread)@@
+
 
 EXAMPLES
 --------
Documentation/git-grep.txt +7 -0
index 5474dd7..37af4e3 100644
@@ -203,6 +203,13 @@ git grep --all-match -e NODE -e Unexpected::
 	Looks for a line that has `NODE` or `Unexpected` in
 	files that have lines that match both.
 
+
+Configuration
+-------------
+
+@@CONFIG(color.grep)@@
+@@CONFIG(color.grep.<slot>)@@
+
 Author
 ------
 Originally written by Linus Torvalds <[email protected]>, later
Documentation/git-gui.txt +16 -0
index 2563710..5c53b36 100644
@@ -98,6 +98,22 @@ git gui browser maint::
 	selected in the browser can be viewed with the internal
 	blame viewer.
 
+CONFIGURATION
+-------------
+
+@@CONFIG(gui.commitmsgwidth)@@
+@@CONFIG(gui.diffcontext)@@
+@@CONFIG(gui.encoding)@@
+@@CONFIG(gui.matchtrackingbranch)@@
+@@CONFIG(gui.newbranchtemplate)@@
+@@CONFIG(gui.pruneduringfetch)@@
+@@CONFIG(gui.trustmtime)@@
+@@CONFIG(gui.spellingdictionary)@@
+@@CONFIG(gui.fastcopyblame)@@
+@@CONFIG(gui.copyblamethreshold)@@
+@@CONFIG(gui.blamehistoryctx)@@
+
+
 SEE ALSO
 --------
 linkgit:gitk[1]::
Documentation/git-log.txt +6 -32
index e970664..77987b3 100644
@@ -145,38 +145,12 @@ format.pretty::
 	Default for the `--format` option.  (See "PRETTY FORMATS" above.)
 	Defaults to "medium".
 
-i18n.logOutputEncoding::
-	Encoding to use when displaying logs.  (See "Discussion", above.)
-	Defaults to the value of `i18n.commitEncoding` if set, UTF-8
-	otherwise.
-
-log.date::
-	Default format for human-readable dates.  (Compare the
-	`--date` option.)  Defaults to "default", which means to write
-	dates like `Sat May 8 19:35:34 2010 -0500`.
-
-log.showroot::
-	If `false`, 'git log' and related commands will not treat the
-	initial commit as a big creation event.  Any root commits in
-	`git log -p` output would be shown without a diff attached.
-	The default is `true`.
-
-mailmap.file::
-	See linkgit:git-shortlog[1].
-
-notes.displayRef::
-	Which refs, in addition to the default set by `core.notesRef`
-	or 'GIT_NOTES_REF', to read notes from when showing commit
-	messages with the 'log' family of commands.  See
-	linkgit:git-notes[1].
-+
-May be an unabbreviated ref name or a glob and may be specified
-multiple times.  A warning will be issued for refs that do not exist,
-but a glob that does not match any refs is silently ignored.
-+
-This setting can be disabled by the `--no-standard-notes` option,
-overridden by the 'GIT_NOTES_DISPLAY_REF' environment variable,
-and supplemented by the `--show-notes` option.
+@@CONFIG(i18n.logOutputEncoding)@@
+@@CONFIG(log.date)@@
+@@CONFIG(log.decorate)@@
+@@CONFIG(log.showroot)@@
+@@CONFIG(mailmap.file)@@
+@@CONFIG(notes.displayRef)@@
 
 Author
 ------
Documentation/git-merge.txt +10 -5
index 84043cc..41c7e44 100644
@@ -275,12 +275,17 @@ include::merge-strategies.txt[]
 
 CONFIGURATION
 -------------
-include::merge-config.txt[]
 
-branch.<name>.mergeoptions::
-	Sets default options for merging into branch <name>. The syntax and
-	supported options are the same as those of 'git merge', but option
-	values containing whitespace characters are currently not supported.
+@@CONFIG(merge.conflictstyle)@@
+@@CONFIG(merge.log)@@
+@@CONFIG(merge.renameLimit)@@
+@@CONFIG(merge.stat)@@
+@@CONFIG(merge.tool)@@
+@@CONFIG(merge.verbosity)@@
+@@CONFIG(merge.<driver>.name)@@
+@@CONFIG(merge.<driver>.driver)@@
+@@CONFIG(merge.<driver>.recursive)@@
+@@CONFIG(branch.<name>.mergeoptions)@@
 
 SEE ALSO
 --------
Documentation/git-pull.txt +14 -0
index ab4de10..b169964 100644
@@ -165,6 +165,20 @@ If you tried a pull which resulted in a complex conflicts and
 would want to start over, you can recover with 'git reset'.
 
 
+CONFIGURATION
+-------------
+
+Options that affect 'git pull':
+
+@@CONFIG(branch.<name>.remote)@@
+@@CONFIG(branch.<name>.merge)@@
+@@CONFIG(branch.<name>.rebase)@@
+
+Options that affect the underlying 'git fetch' and 'git merge' are
+documented in linkgit:git-fetch[1] and linkgit:git-merge[1],
+respectively.
+
+
 SEE ALSO
 --------
 linkgit:git-fetch[1], linkgit:git-merge[1], linkgit:git-config[1]
Documentation/git-push.txt +19 -0
index 658ff2f..6c76f74 100644
@@ -406,6 +406,25 @@ Commits A and B would no longer belong to a branch with a symbolic name,
 and so would be unreachable.  As such, these commits would be removed by
 a `git gc` command on the origin repository.
 
+CONFIGURATION
+-------------
+
+Variables that affect the sending (local) side:
+
+@@CONFIG(push.default)@@
+@@CONFIG(branch.<name>.remote)@@
+@@CONFIG(branch.<name>.merge)@@
+
+Variables that affect the receiving (remote) side:
+
+@@CONFIG(receive.autogc)@@
+@@CONFIG(receive.fsckObjects)@@
+@@CONFIG(receive.unpackLimit)@@
+@@CONFIG(receive.denyDeletes)@@
+@@CONFIG(receive.denyDeleteCurrent)@@
+@@CONFIG(receive.denyCurrentBranch)@@
+@@CONFIG(receive.denyNonFastForwards)@@
+@@CONFIG(receive.updateserverinfo)@@
 
 Author
 ------
Documentation/git-rebase.txt +2 -3
index be23ad2..41e0604 100644
@@ -195,9 +195,8 @@ Alternatively, you can undo the 'git rebase' with
 CONFIGURATION
 -------------
 
-rebase.stat::
-	Whether to show a diffstat of what changed upstream since the last
-	rebase. False by default.
+@@CONFIG(rebase.stat)@@
+
 
 OPTIONS
 -------
Documentation/git-shortlog.txt +6 -0
index bc1ac77..21628fc 100644
@@ -69,6 +69,12 @@ spelled differently.
 include::mailmap.txt[]
 
 
+CONFIGURATION
+-------------
+
+@@CONFIG(mailmap.file)@@
+
+
 Author
 ------
 Written by Jeff Garzik <[email protected]>
Documentation/git-status.txt +5 -13
index 2fd054c..c001d56 100644
@@ -152,19 +152,11 @@ backslash-escaping is performed. Fourth, there is no branch line.
 CONFIGURATION
 -------------
 
-The command honors `color.status` (or `status.color` -- they
-mean the same thing and the latter is kept for backward
-compatibility) and `color.status.<slot>` configuration variables
-to colorize its output.
-
-If the config variable `status.relativePaths` is set to false, then all
-paths shown are relative to the repository root, not to the current
-directory.
-
-If `status.submodulesummary` is set to a non zero number or true (identical
-to -1 or an unlimited number), the submodule summary will be enabled for
-the long format and a summary of commits for modified submodules will be
-shown (see --summary-limit option of linkgit:git-submodule[1]).
+@@CONFIG(color.status)@@
+@@CONFIG(color.status.<slot>)@@
+@@CONFIG(status.relativePaths)@@
+@@CONFIG(status.showUntrackedFiles)@@
+@@CONFIG(status.submodulesummary)@@
 
 SEE ALSO
 --------
Documentation/git-submodule.txt +8 -0
index 1ed331c..40bb60f 100644
@@ -258,6 +258,14 @@ to each submodule url is "submodule.$name.url".  See linkgit:gitmodules[5]
 for details.
 
 
+CONFIGURATION
+-------------
+
+@@CONFIG(submodule.<name>.path)@@
+@@CONFIG(submodule.<name>.url)@@
+@@CONFIG(submodule.<name>.update)@@
+
+
 AUTHOR
 ------
 Written by Lars Hjemli <[email protected]>
Documentation/git-tag.txt +2 -9
index 31c78a8..8e264e7 100644
@@ -95,15 +95,8 @@ OPTIONS
 
 CONFIGURATION
 -------------
-By default, 'git tag' in sign-with-default mode (-s) will use your
-committer identity (of the form "Your Name <[email protected]>") to
-find a key.  If you want to use a different default key, you can specify
-it in the repository configuration as follows:
-
--------------------------------------
-[user]
-    signingkey = <gpg-key-id>
--------------------------------------
+
+@@CONFIG(user.signingkey)@@
 
 
 DISCUSSION
Documentation/gitk.txt +8 -0
index 05ac1c7..498a5f1 100644
@@ -100,6 +100,14 @@ Files
 Gitk creates the .gitk file in your $HOME directory to store preferences
 such as display options, font, and colors.
 
+
+CONFIGURATION
+-------------
+
+@@CONFIG(gui.encoding)@@
+@@CONFIG(i18n.commitEncoding)@@
+
+
 SEE ALSO
 --------
 'qgit(1)'::
Documentation/merge-config.txt deleted +0 -49

49 lines not on this page · raw message

Signature · 1 line
1.7.2.349.gd5452
#14 lore raw

Re: [PATCH 3-24/24] Documentation: include configuration options in manpages

Documentation/git-add.txt subdirectories. · line 152

Quoted 11 lines · Thomas Rast

+++ b/Documentation/git-add.txt

Documentation/git-add.txt +2 -4
@@ -148,10 +148,8 @@ subdirectories.
 Configuration
 -------------
 
-The optional configuration variable `core.excludesfile` indicates a path to a
-file containing patterns of file names to exclude from git-add, similar to
-$GIT_DIR/info/exclude.  Patterns in the exclude file are used in addition to
-those in info/exclude.  See linkgit:gitrepository-layout[5].
+@@CONFIG(add.ignore-errors)@@
+@@CONFIG(core.excludesfile)@@

Hmm, the packrat in me does not like cavalierly throwing away text like this. :)

[...]

Documentation/git-archive.txt zip · line 97

Quoted 13 lines
Documentation/git-archive.txt +3 -6
+++ b/Documentation/git-archive.txt
@@ -93,12 +93,8 @@ zip
 CONFIGURATION
 -------------
 
-tar.umask::
-	This variable can be used to restrict the permission bits of
-	tar archive entries.  The default is 0002, which turns off the
-	world write bit.  The special value "user" indicates that the
-	archiving user's umask will be used instead.  See umask(2) for
-	details.
+@@CONFIG(tar.umask)@@
+

Can this genre of change be automated?

[...]

Documentation/git-branch.txt but different purposes: · line 231

Quoted 12 lines
Documentation/git-branch.txt +8 -0
+++ b/Documentation/git-branch.txt
@@ -222,6 +222,14 @@ but different purposes:
 - `--no-merged` is used to find branches which are candidates for merging
   into HEAD, since those branches are not fully contained by HEAD.
 
+
+CONFIGURATION
+-------------
+
+@@CONFIG(branch.autosetupmerge)@@
+@@CONFIG(branch.autosetuprebase)@@
+

Obviously a good thing.

Thanks.
Jonathan