Skip to contentSkip to conversation

ARM: Samsung: Introduce group field for GPIOs

PATCH New Kyungmin Park 1 participant 1 message Aug 5, 2010

Subsystems (2)
Arm (32-bit) Arm sub-architectures
lore
Share & tools
lore

Kyungmin Park

author
#0 lore raw

PATCH 2/5 ARM: Samsung: Introduce group field for GPIOs

From: Kyungmin Park <[email protected]>

The GPIOs are consisted of several groups at Samsung SoCs. Basically GPIOs support interrupt feature but some GPISs don't support. In case of external interrupt it's alive at any case and support wakeup feature.

Using group field it can assign the group number.
e.g., GPA0 has group 0. GPA1 has group 1, and so on.
On the other hand, GPH0 will start with group 0 in case of external interrupt.

With this group field, it can calculate the gpio offset and interrupt number easily.

Signed-off-by Kyungmin Park <[email protected]>
---
 arch/arm/plat-samsung/include/plat/gpio-core.h |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
arch/arm/plat-samsung/include/plat/gpio-core.h +2 -0
index e358c7d..56aa136 100644
@@ -45,6 +45,7 @@ struct s3c_gpio_cfg;
  * @base: The base pointer to the gpio configuration registers.
  * @config: special function and pull-resistor control information.
  * @lock: Lock for exclusive access to this gpio bank.
+ * @group: The interrupt group number either GPIO or external
  * @pm_save: Save information for suspend/resume support.
  *
  * This wrapper provides the necessary information for the Samsung

@@ -64,6 +65,7 @@ struct s3c_gpio_chip {
 	struct s3c_gpio_pm	*pm;
 	void __iomem		*base;
 	spinlock_t		 lock;
+	int			group;
 #ifdef CONFIG_PM
 	u32			pm_save[4];
 #endif
Signature · 1 line
1.5.3.3