ARM: S5PC210: GPIO library support

From: Kyungmin Park <[email protected]>

S5PC210 has three GPIOs. Part 1 uses the same as previous framework. Part2 & Part 3 uses the own ioremap address.

Known issues: external interrupt codes depend on VA_GPIO which is used at

1
. But actual external interrupt GPIOs are located at Part 2 of GPIO. It needs to fixed by passsing the base address to irq-ext routine.

Signed-off-by Kyungmin Park <[email protected]>

new file mode 100644
index 0000000..c19fcf3

arch/arm/mach-s5pv310/gpiolib.c new file +47 -0

@@ -0,0 +1,360 @@
+/*
+ * linux/arch/arm/mach-s5pv310/gpiolib.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co., Ltd.
+ *
+ * S5PC210 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <mach/map.h>
+
+static struct s3c_gpio_cfg gpio_cfg = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_noint = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_extint = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+/*
+ * GPIO bank's base address given the index of the bank in the
+ * list of all gpio banks.
+ */
+#define S5PC210_BANK_BASE(bank_nr)	(S5P_VA_GPIO + ((bank_nr) * 0x20))
+#define S5PC210_BANK2_BASE(base, bank)	((base) + ((bank) * 0x20))
+
+#define EXTINT_OFFSET			(0xC00)

arch/arm/mach-s5pv310/gpiolib.c new file +251 -0

+ */
+
+static struct s3c_gpio_chip s5pc210_gpio_part1_4bit[] = {
+	{
+		.chip	= {
+			.base	= S5PV310_GPA0(0),
+			.ngpio	= S5PV310_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPA1(0),
+			.ngpio	= S5PV310_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPB(0),
+			.ngpio	= S5PV310_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPC0(0),
+			.ngpio	= S5PV310_GPIO_C0_NR,
+			.label	= "GPC0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPC1(0),
+			.ngpio	= S5PV310_GPIO_C1_NR,
+			.label	= "GPC1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPD0(0),
+			.ngpio	= S5PV310_GPIO_D0_NR,
+			.label	= "GPD0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPD1(0),
+			.ngpio	= S5PV310_GPIO_D1_NR,
+			.label	= "GPD1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPE0(0),
+			.ngpio	= S5PV310_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPE1(0),
+			.ngpio	= S5PV310_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPE2(0),
+			.ngpio	= S5PV310_GPIO_E2_NR,
+			.label	= "GPE2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPE3(0),
+			.ngpio	= S5PV310_GPIO_E3_NR,
+			.label	= "GPE3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPE4(0),
+			.ngpio	= S5PV310_GPIO_E4_NR,
+			.label	= "GPE4",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPF0(0),
+			.ngpio	= S5PV310_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPF1(0),
+			.ngpio	= S5PV310_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPF2(0),
+			.ngpio	= S5PV310_GPIO_F2_NR,
+			.label	= "GPF2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPF3(0),
+			.ngpio	= S5PV310_GPIO_F3_NR,
+			.label	= "GPF3",
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5pc210_gpio_part2_4bit[] = {
+	{
+		.chip	= {
+			.base	= S5PV310_GPJ0(0),
+			.ngpio	= S5PV310_GPIO_J0_NR,
+			.label	= "GPJ0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPJ1(0),
+			.ngpio	= S5PV310_GPIO_J1_NR,
+			.label	= "GPJ1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPK0(0),
+			.ngpio	= S5PV310_GPIO_K0_NR,
+			.label	= "GPK0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPK1(0),
+			.ngpio	= S5PV310_GPIO_K1_NR,
+			.label	= "GPK1",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPK2(0),
+			.ngpio	= S5PV310_GPIO_K2_NR,
+			.label	= "GPK2",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPK3(0),
+			.ngpio	= S5PV310_GPIO_K3_NR,
+			.label	= "GPK3",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPL0(0),
+			.ngpio	= S5PV310_GPIO_L0_NR,
+			.label	= "GPL0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPL1(0),
+			.ngpio	= S5PV310_GPIO_L0_NR,
+			.label	= "GPL0",
+		},
+	}, {
+		.chip	= {
+			.base	= S5PV310_GPL2(0),
+			.ngpio	= S5PV310_GPIO_L2_NR,
+			.label	= "GPL2",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV310_MP00(0),
+			.ngpio	= S5PV310_GPIO_MP00_NR,
+			.label	= "MP00",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV310_MP01(0),
+			.ngpio	= S5PV310_GPIO_MP01_NR,
+			.label	= "MP01",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV310_MP02(0),
+			.ngpio	= S5PV310_GPIO_MP02_NR,
+			.label	= "MP02",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV310_MP03(0),
+			.ngpio	= S5PV310_GPIO_MP03_NR,
+			.label	= "MP03",
+		},
+	}, {
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV310_MP04(0),
+			.ngpio	= S5PV310_GPIO_MP04_NR,
+			.label	= "MP04",
+		},
+	}, {
+		.config	= &gpio_cfg_extint,
+		.chip	= {
+			.base	= S5PV310_GPX0(0),
+			.ngpio	= S5PV310_GPIO_X0_NR,
+			.label	= "GPX0",
+		},
+	}, {
+		.config	= &gpio_cfg_extint,
+		.chip	= {
+			.base	= S5PV310_GPX1(0),
+			.ngpio	= S5PV310_GPIO_X1_NR,
+			.label	= "GPX1",
+		},
+	}, {
+		.config	= &gpio_cfg_extint,
+		.chip	= {
+			.base	= S5PV310_GPX2(0),
+			.ngpio	= S5PV310_GPIO_X2_NR,
+			.label	= "GPX2",
+		},
+	}, {
+		.config	= &gpio_cfg_extint,
+		.chip	= {
+			.base	= S5PV310_GPX3(0),
+			.ngpio	= S5PV310_GPIO_X3_NR,
+			.label	= "GPX3",
+		},
+	},
+};
+
+static struct s3c_gpio_chip s5pc210_gpio_part3_4bit[] = {
+	{
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PV310_GPZ(0),
+			.ngpio	= S5PV310_GPIO_Z_NR,
+			.label	= "GPZ",
+		},
+	},
+};
+
+static __init int s5pc210_gpiolib_init(void)
+{
+	struct s3c_gpio_chip *chip;
+	int nr_chips;
+	int i, extint = 0;
+	void __iomem *base;
+
+	/* Part 1 */
+	chip = s5pc210_gpio_part1_4bit;
+	nr_chips = ARRAY_SIZE(s5pc210_gpio_part1_4bit);
+
+	for (i = 0; i < nr_chips; i++, chip++) {
+		if (chip->config == NULL)
+			chip->config = &gpio_cfg;
+
+		if (chip->config == &gpio_cfg_extint)
+			chip->base = S5PC210_BANK_BASE(extint) +

EXTINT_OFFSET;

arch/arm/mach-s5pv310/gpiolib.c new file +22 -0

+
+		if (chip->base == NULL)
+			chip->base = S5PC210_BANK_BASE(i);
+	}
+
+	samsung_gpiolib_add_4bit_chips(s5pc210_gpio_part1_4bit, nr_chips);
+
+	/* It's permanent mapping. no iounmap */
+	base = ioremap(S5PV310_PA_GPIO2, SZ_4K);
+	if (!base)
+		panic("Can't ioremapthe GPIO Part 2 address\n");
+
+	/* Part 2 */
+	chip = s5pc210_gpio_part2_4bit;
+	nr_chips = ARRAY_SIZE(s5pc210_gpio_part2_4bit);
+
+	for (i = 0; i < nr_chips; i++, chip++) {
+		if (chip->config == NULL)
+			chip->config = &gpio_cfg;
+
+		if (chip->config == &gpio_cfg_extint)
+			chip->base = S5PC210_BANK2_BASE(base, extint) +

EXTINT_OFFSET;

arch/arm/mach-s5pv310/gpiolib.c new file +21 -0

+
+		if (chip->base == NULL)
+			chip->base = S5PC210_BANK2_BASE(base, i);
+	}
+
+	samsung_gpiolib_add_4bit_chips(s5pc210_gpio_part2_4bit, nr_chips);
+
+	/* It's permanent mapping. no iounmap */
+	base = ioremap(S5PV310_PA_GPIO3, SZ_4K);
+	if (!base)
+		panic("Can't ioremapthe GPIO Part 3 address\n");
+
+	/* Part 3 */
+	chip = s5pc210_gpio_part3_4bit;
+	nr_chips = ARRAY_SIZE(s5pc210_gpio_part3_4bit);
+
+	for (i = 0; i < nr_chips; i++, chip++) {
+		if (chip->config == NULL)
+			chip->config = &gpio_cfg;
+
+		if (chip->base == NULL)

Quoted 5 lines · Kyungmin Park

From: Kyungmin Park <[email protected]>

S5PC210 has three GPIOs. Part 1 uses the same as previous framework. Part2 & Part 3 uses the own ioremap address.

I don't think so, GPIO2 and GPIO3 parts should use same framework not ioremap.
As my team member replied to you, can support 3 GPIO parts with same way....

And same method can help to handle this more easily.

Quoted 2 lines

Known issues: external interrupt codes depend on VA_GPIO which is used at

Part

Quoted 5 lines

1
. But actual external interrupt GPIOs are located at Part 2 of GPIO. It needs to fixed by passsing the base address to irq-ext routine.

Signed-off-by Kyungmin Park <[email protected]>

Review

Quoted 8 lines

---
?arch/arm/mach-s5pv310/Makefile ?| ? ?2 +- ?arch/arm/mach-s5pv310/gpiolib.c | ?360
+++++++++++++++++++++++++++++++++++++++
?2 files changed, 361 insertions(+), 1 deletions(-) ?create mode 100644 arch/arm/mach-s5pv310/gpiolib.c

(quoted diff) +0 -0

b/arch/arm/mach-s5pv310/Makefile

arch/arm/mach-s5pv310/Makefile

Quoted 9 lines

index 82dbbaa..de49e98 100644

arch/arm/mach-s5pv310/Makefile +0 -0

@@ -12,7 +12,7 @@ obj- ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?:=
 

?# Core support for S5PV310 system

arch/arm/mach-s5pv310/Makefile +1 -1

-obj-$(CONFIG_CPU_S5PV310) ? ?+= cpu.o init.o clock.o irq-combiner.o
+obj-$(CONFIG_CPU_S5PV310) ? ?+= cpu.o init.o clock.o irq-combiner.o

gpiolib.o

Review

Quoted 4 lines

?obj-$(CONFIG_CPU_S5PV310) ? ?+= setup-i2c0.o time.o

?obj-$(CONFIG_SMP) ? ? ? ? ? ?+= platsmp.o headsmp.o

(quoted diff) +0 -0

b/arch/arm/mach-s5pv310/gpiolib.c

Quoted 52 lines

new file mode 100644
index 0000000..c19fcf3

arch/arm/mach-s5pv310/gpiolib.c new file +47 -0

@@ -0,0 +1,360 @@
+/*
+ * linux/arch/arm/mach-s5pv310/gpiolib.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co., Ltd.
+ *
+ * S5PC210 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <mach/map.h>
+
+static struct s3c_gpio_cfg gpio_cfg = {
+ ? ? .set_config ? ? = s3c_gpio_setcfg_s3c64xx_4bit,
+ ? ? .set_pull ? ? ? = s3c_gpio_setpull_updown,
+ ? ? .get_pull ? ? ? = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_noint = {
+ ? ? .set_config ? ? = s3c_gpio_setcfg_s3c64xx_4bit,
+ ? ? .set_pull ? ? ? = s3c_gpio_setpull_updown,
+ ? ? .get_pull ? ? ? = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_extint = {
+ ? ? .set_config ? ? = s3c_gpio_setcfg_s3c64xx_4bit,
+ ? ? .set_pull ? ? ? = s3c_gpio_setpull_updown,
+ ? ? .get_pull ? ? ? = s3c_gpio_getpull_updown,
+};
+
+/*
+ * GPIO bank's base address given the index of the bank in the
+ * list of all gpio banks.
+ */
+#define S5PC210_BANK_BASE(bank_nr) ? (S5P_VA_GPIO + ((bank_nr) * 0x20))
+#define S5PC210_BANK2_BASE(base, bank) ? ? ? ((base) + ((bank) * 0x20))
+
+#define EXTINT_OFFSET ? ? ? ? ? ? ? ? ? ? ? ?(0xC00)

arch/arm/mach-s5pv310/gpiolib.c line 57

Quoted 10 lines

arch/arm/mach-s5pv310/gpiolib.c new file +10 -0

+
+/*
+ * Following are the gpio banks in c210.
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure gpio_cfg in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of s3c_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order

here.

Quoted 296 lines

arch/arm/mach-s5pv310/gpiolib.c new file +251 -0

+ */
+
+static struct s3c_gpio_chip s5pc210_gpio_part1_4bit[] = {
+ ? ? {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPA0(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_A0_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPA0",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPA1(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_A1_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPA1",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPB(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_B_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPB",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPC0(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_C0_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPC0",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPC1(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_C1_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPC1",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPD0(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_D0_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPD0",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPD1(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_D1_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPD1",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPE0(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_E0_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPE0",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPE1(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_E1_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPE1",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPE2(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_E2_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPE2",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPE3(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_E3_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPE3",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPE4(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_E4_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPE4",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPF0(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_F0_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPF0",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPF1(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_F1_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPF1",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPF2(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_F2_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPF2",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPF3(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_F3_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPF3",
+ ? ? ? ? ? ? },
+ ? ? },
+};
+
+static struct s3c_gpio_chip s5pc210_gpio_part2_4bit[] = {
+ ? ? {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPJ0(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_J0_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPJ0",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPJ1(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_J1_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPJ1",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPK0(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_K0_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPK0",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPK1(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_K1_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPK1",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPK2(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_K2_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPK2",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPK3(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_K3_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPK3",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPL0(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_L0_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPL0",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPL1(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_L0_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPL0",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPL2(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_L2_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPL2",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .config = &gpio_cfg_noint,
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_MP00(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_MP00_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "MP00",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .config = &gpio_cfg_noint,
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_MP01(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_MP01_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "MP01",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .config = &gpio_cfg_noint,
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_MP02(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_MP02_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "MP02",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .config = &gpio_cfg_noint,
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_MP03(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_MP03_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "MP03",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .config = &gpio_cfg_noint,
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_MP04(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_MP04_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "MP04",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .config = &gpio_cfg_extint,
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPX0(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_X0_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPX0",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .config = &gpio_cfg_extint,
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPX1(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_X1_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPX1",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .config = &gpio_cfg_extint,
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPX2(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_X2_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPX2",
+ ? ? ? ? ? ? },
+ ? ? }, {
+ ? ? ? ? ? ? .config = &gpio_cfg_extint,
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPX3(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_X3_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPX3",
+ ? ? ? ? ? ? },
+ ? ? },
+};
+
+static struct s3c_gpio_chip s5pc210_gpio_part3_4bit[] = {
+ ? ? {
+ ? ? ? ? ? ? .config = &gpio_cfg_noint,
+ ? ? ? ? ? ? .chip ? = {
+ ? ? ? ? ? ? ? ? ? ? .base ? = S5PV310_GPZ(0),
+ ? ? ? ? ? ? ? ? ? ? .ngpio ?= S5PV310_GPIO_Z_NR,
+ ? ? ? ? ? ? ? ? ? ? .label ?= "GPZ",
+ ? ? ? ? ? ? },
+ ? ? },
+};
+
+static __init int s5pc210_gpiolib_init(void)
+{
+ ? ? struct s3c_gpio_chip *chip;
+ ? ? int nr_chips;
+ ? ? int i, extint = 0;
+ ? ? void __iomem *base;
+
+ ? ? /* Part 1 */
+ ? ? chip = s5pc210_gpio_part1_4bit;
+ ? ? nr_chips = ARRAY_SIZE(s5pc210_gpio_part1_4bit);
+
+ ? ? for (i = 0; i < nr_chips; i++, chip++) {
+ ? ? ? ? ? ? if (chip->config == NULL)
+ ? ? ? ? ? ? ? ? ? ? chip->config = &gpio_cfg;
+
+ ? ? ? ? ? ? if (chip->config == &gpio_cfg_extint)
+ ? ? ? ? ? ? ? ? ? ? chip->base = S5PC210_BANK_BASE(extint) +

EXTINT_OFFSET;

arch/arm/mach-s5pv310/gpiolib.c new file +22 -0

+
+ ? ? ? ? ? ? if (chip->base == NULL)
+ ? ? ? ? ? ? ? ? ? ? chip->base = S5PC210_BANK_BASE(i);
+ ? ? }
+
+ ? ? samsung_gpiolib_add_4bit_chips(s5pc210_gpio_part1_4bit, nr_chips);
+
+ ? ? /* It's permanent mapping. no iounmap */
+ ? ? base = ioremap(S5PV310_PA_GPIO2, SZ_4K);
+ ? ? if (!base)
+ ? ? ? ? ? ? panic("Can't ioremapthe GPIO Part 2 address\n");
+
+ ? ? /* Part 2 */
+ ? ? chip = s5pc210_gpio_part2_4bit;
+ ? ? nr_chips = ARRAY_SIZE(s5pc210_gpio_part2_4bit);
+
+ ? ? for (i = 0; i < nr_chips; i++, chip++) {
+ ? ? ? ? ? ? if (chip->config == NULL)
+ ? ? ? ? ? ? ? ? ? ? chip->config = &gpio_cfg;
+
+ ? ? ? ? ? ? if (chip->config == &gpio_cfg_extint)
+ ? ? ? ? ? ? ? ? ? ? chip->base = S5PC210_BANK2_BASE(base, extint) +

EXTINT_OFFSET;

arch/arm/mach-s5pv310/gpiolib.c new file +21 -0

+
+ ? ? ? ? ? ? if (chip->base == NULL)
+ ? ? ? ? ? ? ? ? ? ? chip->base = S5PC210_BANK2_BASE(base, i);
+ ? ? }
+
+ ? ? samsung_gpiolib_add_4bit_chips(s5pc210_gpio_part2_4bit, nr_chips);
+
+ ? ? /* It's permanent mapping. no iounmap */
+ ? ? base = ioremap(S5PV310_PA_GPIO3, SZ_4K);
+ ? ? if (!base)
+ ? ? ? ? ? ? panic("Can't ioremapthe GPIO Part 3 address\n");
+
+ ? ? /* Part 3 */
+ ? ? chip = s5pc210_gpio_part3_4bit;
+ ? ? nr_chips = ARRAY_SIZE(s5pc210_gpio_part3_4bit);
+
+ ? ? for (i = 0; i < nr_chips; i++, chip++) {
+ ? ? ? ? ? ? if (chip->config == NULL)
+ ? ? ? ? ? ? ? ? ? ? chip->config = &gpio_cfg;
+
+ ? ? ? ? ? ? if (chip->base == NULL)

arch/arm/mach-s5pv310/gpiolib.c

Quoted 10 lines

arch/arm/mach-s5pv310/gpiolib.c new file +9 -1

+ ? ? ? ? ? ? ? ? ? ? chip->base = S5PC210_BANK2_BASE(base, i);
+ ? ? }
+
+ ? ? samsung_gpiolib_add_4bit_chips(s5pc210_gpio_part3_4bit, nr_chips);
+
+ ? ? return 0;
+}
+
+core_initcall(s5pc210_gpiolib_init);
--

Thanks.

Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.