add module gensplash

PATCH In review Amadeusz Żołnowski 1 participant 2 messages Aug 9, 2010 1 message not in the archive

Share & tools

Amadeusz Żołnowski

author

2010-08-09 10:18 UTC #0 lore raw

PATCH 1/1 add module gensplash

---
 modules.d/50gensplash/README                  |   42 ++++++++++++++++
 modules.d/50gensplash/check                   |    5 ++
 modules.d/50gensplash/gensplash-emergency.sh  |    5 ++
 modules.d/50gensplash/gensplash-newroot.sh    |    5 ++
 modules.d/50gensplash/gensplash-pretrigger.sh |   14 ++++++
 modules.d/50gensplash/install                 |   63 +++++++++++++++++++++++++
 6 files changed, 134 insertions(+), 0 deletions(-)
 create mode 100644 modules.d/50gensplash/README
 create mode 100755 modules.d/50gensplash/check
 create mode 100755 modules.d/50gensplash/gensplash-emergency.sh
 create mode 100755 modules.d/50gensplash/gensplash-newroot.sh
 create mode 100755 modules.d/50gensplash/gensplash-pretrigger.sh
 create mode 100755 modules.d/50gensplash/install

modules.d/50gensplash/README new file +42 -0

new file mode 100644
index 0000000..fa02cd1
@@ -0,0 +1,42 @@
+Dracut gensplash module
+-----------------------
+
+INDEX
+
+0. Introduction
+1. Hostonly vs Generic
+2. Configuration and kernel parameters
+
+~
+
+0. Introduction
+
+gensplash is based on Genkernel code and that's why it's Gentoo-specific.  It
+requires splashutils to work.  To set up theme you may edit /etc/conf.d/splash
+or set DRACUT_GENSPLASH_THEME and DRACUT_GENSPLASH_RES variables.  Your theme
+has to exist in /etc/splash and for every given resolution has to exist config
+in theme's directory, e.g. there's 1024x768.cfg in /etc/splash/natural_gentoo.
+List of resolutions is comma-separated.
+
+NOTE: The module will be rewritten to be distro-neutral. Its name will change
+to fbsplash.
+
+
+1. Hostonly vs Generic
+
+All available themes are installed only if no --hostonly is specified and no
+DRACUT_GENSPLASH_THEME and DRACUT_GENSPLASH_RES are set.  Otherwise those vars
+are checked and if not set then config /etc/conf.d/splash is read.
+
+
+2. Configuration and kernel parameters
+
+Example set up by environment variables:
+    DRACUT_GENSPLASH_THEME=natural_gentoo
+    DRACUT_GENSPLASH_RES=1024x768,1024x600
+
+Example kernel arguments:
+    splash=silent,theme:natural_gentoo console=tty1 quiet
+
+You may easily set up the module using Genkernel with arguments:
+    --gensplash=<theme>:<res1>,<res2>,...

modules.d/50gensplash/check new file +5 -0

new file mode 100755
index 0000000..90b8874
@@ -0,0 +1,5 @@
+#!/bin/bash
+
+# TODO: splash_geninitramfs
+# TODO: /usr/share/splashutils/initrd.splash
+exit 255

modules.d/50gensplash/gensplash-emergency.sh new file +5 -0

new file mode 100755
index 0000000..01e639b
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+CDROOT=0
+. /lib/gensplash-lib.sh
+splash verbose

modules.d/50gensplash/gensplash-newroot.sh new file +5 -0

new file mode 100755
index 0000000..ed2d421
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+CDROOT=0
+. /lib/gensplash-lib.sh
+splash set_msg 'Switching to new root'

modules.d/50gensplash/gensplash-pretrigger.sh new file +14 -0

new file mode 100755
index 0000000..f1b0d31
@@ -0,0 +1,14 @@
+#!/bin/sh
+
+if ! getarg rd_NO_SPLASH; then
+    [ -c /dev/null ] || mknod /dev/null c 1 3
+    [ -c /dev/console ] || mknod /dev/console c 5 1
+    [ -c /dev/tty0 ] || mknod /dev/tty0 c 4 0
+
+    info "Starting Gentoo Splash"
+
+    /lib/udev/console_init tty0
+    CDROOT=0
+    . /lib/gensplash-lib.sh
+    splash init
+fi

modules.d/50gensplash/install new file +63 -0

63 lines not on this page · raw message

Signature · 1 line

1.7.2

A message that is not in the archive (sent off-list or not yet received): [email protected]