Skip to contentSkip to conversation

omap_hsmmc: add erase capability

PATCH New [email protected] 1 participant 1 message Aug 11, 2010

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 17/24 omap_hsmmc: add erase capability

From: Adrian Hunter <[email protected]>

Disable the data (busy) timeout for erases and set the MMC_CAP_ERASE capability.

Cc Kyungmin Park <[email protected]>
Cc Madhusudhan Chikkature <[email protected]>
Cc Christoph Hellwig <[email protected]>
Cc Ben Gardiner <[email protected]>

---

 drivers/mmc/host/omap_hsmmc.c |   13 ++++++++++---
 1 file changed, 10 insertions(+), 3 deletions(-)
drivers/mmc/host/omap_hsmmc.c renamed from drivers/mmc/host/omap_hsmmc.c~omap_hsmmc-add-erase-capability +10 -3
diff -puN drivers/mmc/host/omap_hsmmc.c~omap_hsmmc-add-erase-capability drivers/mmc/host/omap_hsmmc.c
@@ -28,6 +28,7 @@
 #include <linux/clk.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/core.h>
+#include <linux/mmc/mmc.h>
 #include <linux/io.h>
 #include <linux/semaphore.h>
 #include <linux/gpio.h>
@@ -78,6 +79,7 @@
 #define INT_EN_MASK		0x307F0033
 #define BWR_ENABLE		(1 << 4)
 #define BRR_ENABLE		(1 << 5)
+#define DTO_ENABLE		(1 << 20)
 #define INIT_STREAM		(1 << 1)
 #define DP_SELECT		(1 << 21)
 #define DDIR			(1 << 4)
@@ -523,7 +525,8 @@ static void omap_hsmmc_stop_clock(struct
 		dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n");
 }
 
-static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host)
+static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host,
+				  struct mmc_command *cmd)
 {
 	unsigned int irq_mask;
 
@@ -532,6 +535,10 @@ static void omap_hsmmc_enable_irq(struct
 	else
 		irq_mask = INT_EN_MASK;
 
+	/* Disable timeout for erases */
+	if (cmd->opcode == MMC_ERASE)
+		irq_mask &= ~DTO_ENABLE;
+
 	OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR);
 	OMAP_HSMMC_WRITE(host->base, ISE, irq_mask);
 	OMAP_HSMMC_WRITE(host->base, IE, irq_mask);
@@ -782,7 +789,7 @@ omap_hsmmc_start_command(struct omap_hsm
 		mmc_hostname(host->mmc), cmd->opcode, cmd->arg);
 	host->cmd = cmd;
 
-	omap_hsmmc_enable_irq(host);
+	omap_hsmmc_enable_irq(host, cmd);
 
 	host->response_busy = 0;
 	if (cmd->flags & MMC_RSP_PRESENT) {
@@ -2107,7 +2114,7 @@ static int __init omap_hsmmc_probe(struc
 	mmc->max_seg_size = mmc->max_req_size;
 
 	mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
-		     MMC_CAP_WAIT_WHILE_BUSY;
+		     MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE;
 
 	switch (mmc_slot(host).wires) {
 	case 8:

_