wireless: revert %pM to %pm conversion
PATCH 1/1 wireless: revert %pM to %pm conversion
The patch: "drivers/net/wireless: Use wiphy_<level>" not only replaced printk(KERN_<level> with wiphy_<level>, but also converted some format string characters to lower case.
This would be totally fine, if it wasn't for this tiny little detail:
(extract from lib/vsprintf.c)
/*
* Show a '%p' thing. A kernel extension is that the '%p'
* is followed by an extra set of alphanumeric characters
* that are extended format specifiers.
* [...]
* - 'M' For a 6-byte MAC address, it prints the address
* in the usual colon-separated hex notation
* - 'm' For a 6-byte MAC address, it prints the hex
* address without colons
*/
In case of p54, the kernel now prints:
phy4: hwaddr 000011223344, mac:isl3892 rf:Xbow
and before the commit, it looked like this:
phy4: hwaddr 00:00:11:22:33:44, mac:isl3892 rf:Xbow
---
drivers/net/wireless/adm8211.c +1 -1
@@ -1902,7 +1902,7 @@ static int __devinit adm8211_probe(struct pci_dev *pdev, goto err_free_eeprom; } -wiphy_info (dev->wiphy,"hwaddr %pm, rev 0x%02x\n" , +wiphy_info (dev->wiphy,"hwaddr %pM, rev 0x%02x\n" , dev->wiphy->perm_addr, pdev->revision);return 0 ;
drivers/net/wireless/at76c50x-usb.c +1 -1
@@ -2310,7 +2310,7 @@ static int at76_init_new_device(struct at76_priv *priv, priv->mac80211_registered =1 ; -wiphy_info (priv->hw->wiphy,"usb %s, mac %pm, firmware %d.%d.%d-%d\n" , +wiphy_info (priv->hw->wiphy,"usb %s, mac %pM, firmware %d.%d.%d-%d\n" ,dev_name (&interface->dev), priv->mac_addr, priv->fw_version.major, priv->fw_version.minor, priv->fw_version.patch, priv->fw_version.build);
drivers/net/wireless/ath/ar9170/main.c +2 -2
@@ -387,7 +387,7 @@ static struct sk_buff *ar9170_get_queued_skb(struct ar9170 *ar,if (mac &&compare_ether_addr (ieee80211_get_DA (hdr), mac)) {#ifdef AR9170_QUEUE_DEBUG wiphy_debug (ar->hw->wiphy, -"skip frame => da %pm != %pm\n" , +"skip frame => da %pM != %pM\n" , mac,ieee80211_get_DA (hdr));ar9170_print_txheader (ar, skb);#endif /* AR9170_QUEUE_DEBUG */
@@ -495,7 +495,7 @@ void ar9170_handle_command_response(struct ar9170 *ar, void *buf, u32 len)AR9170_TX_PHY_QOS_SHIFT ;#ifdef AR9170_QUEUE_DEBUG wiphy_debug (ar->hw->wiphy, -"recv tx_status for %pm, p:%08x, q:%d\n" , +"recv tx_status for %pM, p:%08x, q:%d\n" , cmd->tx_status.dst, phy, q);#endif /* AR9170_QUEUE_DEBUG */
drivers/net/wireless/mac80211_hwsim.c +1 -1
@@ -1467,7 +1467,7 @@ static int __init init_mac80211_hwsim(void)break ; } -wiphy_debug (hw->wiphy,"hwaddr %pm registered\n" , +wiphy_debug (hw->wiphy,"hwaddr %pM registered\n" , hw->wiphy->perm_addr); data->debugfs = debugfs_create_dir("hwsim",
drivers/net/wireless/mwl8k.c +1 -1
@@ -4102,7 +4102,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, goto err_free_queues; } - wiphy_info(hw->wiphy, "%s v%d, %pm, %s firmware %u.%u.%u.%u\n", + wiphy_info(hw->wiphy, "%s v%d, %pM, %s firmware %u.%u.%u.%u\n", priv->device_info->part_name, priv->hw_rev, hw->wiphy->perm_addr, priv->ap_fw ? "AP" : "STA",
drivers/net/wireless/p54/eeprom.c +1 -1
@@ -700,7 +700,7 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)SET_IEEE80211_PERM_ADDR (dev, perm_addr); } -wiphy_info (dev->wiphy,"hwaddr %pm, mac:isl38%02x rf:%s\n" , +wiphy_info (dev->wiphy,"hwaddr %pM, mac:isl38%02x rf:%s\n" , dev->wiphy->perm_addr, priv->version, p54_rf_chips[priv->rxhw]);
drivers/net/wireless/rtl818x/rtl8180_dev.c +1 -1
@@ -1107,7 +1107,7 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev, goto err_iounmap; } -wiphy_info (dev->wiphy,"hwaddr %pm, %s + %s\n" , +wiphy_info (dev->wiphy,"hwaddr %pM, %s + %s\n" , mac_addr, chip_name, priv->rf->name);return 0 ;
drivers/net/wireless/rtl818x/rtl8187_dev.c +1 -1
@@ -1526,7 +1526,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,mutex_init (&priv->conf_mutex);skb_queue_head_init (&priv->b_tx_status.queue); -wiphy_info (dev->wiphy,"hwaddr %pm, %s v%d + %s, rfkill mask %d\n" , +wiphy_info (dev->wiphy,"hwaddr %pM, %s v%d + %s, rfkill mask %d\n" , mac_addr, chip_name, priv->asic_rev, priv->rf->name, priv->rfkill_mask);
Quoted 3 lines · Christian Lamparter
The patch: "
drivers/net/wireless: Use wiphy_<level>" not only replaced printk(KERN_<level> with wiphy_<level>, but also converted some format string characters to lower case.
Thanks Christian.
My fault, sorry.
There are more undesired newly lower cased words in the original patch.
I now know how that happened.
I lowercased the whole string instead of just the
KERN_<level> part.
I'll fix it and resubmit on top of Christian's patch unless John wants a single patch.
drivers/net/wireless: Restore upper case words in wiphy_<level> messages
In reply to Christian LamparterCommit c96c31e499b70964cfc88744046c998bb710e4b8
"(drivers/net/wireless: Use wiphy_<level>)"
inadvertently changed some upper case words to
lower case. Restore the original case.
--- drivers/net/wireless/adm8211.c | 8 +++--- drivers/net/wireless/at76c50x-usb.c | 22 +++++++------- drivers/net/wireless/ath/ar9170/main.c | 4 +- drivers/net/wireless/mac80211_hwsim.c | 2 +- drivers/net/wireless/mwl8k.c | 34 ++++++++++++------------ drivers/net/wireless/p54/eeprom.c | 6 ++-- drivers/net/wireless/p54/fwio.c | 2 +- drivers/net/wireless/p54/led.c | 4 +- drivers/net/wireless/p54/p54pci.c | 2 +- drivers/net/wireless/p54/txrx.c | 2 +- drivers/net/wireless/rtl818x/rtl8180_dev.c | 6 ++-- drivers/net/wireless/rtl818x/rtl8187_dev.c | 4 +- drivers/net/wireless/rtl818x/rtl8187_rtl8225.c | 4 +- 13 files changed, 50 insertions(+), 50 deletions(-)
drivers/net/wireless/adm8211.c +4 -4
@@ -732,7 +732,7 @@ static int adm8211_rf_set_channel(struct ieee80211_hw *dev, unsigned int chan)/* Nothing to do for ADMtek BBP */ }else if (priv->bbp_type !=ADM8211_TYPE_ADMTEK ) -wiphy_debug (dev->wiphy,"unsupported bbp type %d\n" , +wiphy_debug (dev->wiphy,"unsupported BBP type %d\n" , priv->bbp_type);ADM8211_RESTORE ();
@@ -1032,7 +1032,7 @@ static int adm8211_hw_init_bbp(struct ieee80211_hw *dev)break ; } }else -wiphy_debug (dev->wiphy,"unsupported bbp %d\n" , priv->bbp_type); +wiphy_debug (dev->wiphy,"unsupported BBP %d\n" , priv->bbp_type);ADM8211_CSR_WRITE (SYNRF ,0 );
@@ -1525,7 +1525,7 @@ static int adm8211_start(struct ieee80211_hw *dev) retval =request_irq (priv->pdev->irq, adm8211_interrupt,IRQF_SHARED ,"adm8211" , dev);if (retval) { -wiphy_err (dev->wiphy,"failed to register irq handler\n" ); +wiphy_err (dev->wiphy,"failed to register IRQ handler\n" ); goto fail; }
@@ -1902,7 +1902,7 @@ static int __devinit adm8211_probe(struct pci_dev *pdev, goto err_free_eeprom; } -wiphy_info (dev->wiphy,"hwaddr %pM, rev 0x%02x\n" , +wiphy_info (dev->wiphy,"hwaddr %pM, Rev 0x%02x\n" , dev->wiphy->perm_addr, pdev->revision);return 0 ;
drivers/net/wireless/at76c50x-usb.c +11 -11
@@ -655,7 +655,7 @@ static int at76_get_hw_config(struct at76_priv *priv) exit:kfree (hwcfg);if (ret <0 ) -wiphy_err (priv->hw->wiphy,"cannot get hw config (error %d)\n" , +wiphy_err (priv->hw->wiphy,"cannot get HW Config (error %d)\n" , ret);return ret;
@@ -960,7 +960,7 @@ static void at76_dump_mib_mac_addr(struct at76_priv *priv) sizeof(struct mib_mac_addr));if (ret <0 ) {wiphy_err (priv->hw->wiphy, -"at76_get_mib (mac_addr) failed: %d\n" , ret); +"at76_get_mib (MAC_ADDR) failed: %d\n" , ret); goto exit; }
@@ -989,7 +989,7 @@ static void at76_dump_mib_mac_wep(struct at76_priv *priv) sizeof(struct mib_mac_wep));if (ret <0 ) {wiphy_err (priv->hw->wiphy, -"at76_get_mib (mac_wep) failed: %d\n" , ret); +"at76_get_mib (MAC_WEP) failed: %d\n" , ret); goto exit; }
@@ -1026,7 +1026,7 @@ static void at76_dump_mib_mac_mgmt(struct at76_priv *priv) sizeof(struct mib_mac_mgmt));if (ret <0 ) {wiphy_err (priv->hw->wiphy, -"at76_get_mib (mac_mgmt) failed: %d\n" , ret); +"at76_get_mib (MAC_MGMT) failed: %d\n" , ret); goto exit; }
@@ -1062,7 +1062,7 @@ static void at76_dump_mib_mac(struct at76_priv *priv) ret =at76_get_mib (priv->udev,MIB_MAC , m,sizeof (struct mib_mac ));if (ret <0 ) {wiphy_err (priv->hw->wiphy, -"at76_get_mib (mac) failed: %d\n" , ret); +"at76_get_mib (MAC) failed: %d\n" , ret); goto exit; }
@@ -1099,7 +1099,7 @@ static void at76_dump_mib_phy(struct at76_priv *priv) ret =at76_get_mib (priv->udev,MIB_PHY , m,sizeof (struct mib_phy ));if (ret <0 ) {wiphy_err (priv->hw->wiphy, -"at76_get_mib (phy) failed: %d\n" , ret); +"at76_get_mib (PHY) failed: %d\n" , ret); goto exit; }
@@ -1132,7 +1132,7 @@ static void at76_dump_mib_local(struct at76_priv *priv) ret =at76_get_mib (priv->udev,MIB_LOCAL , m,sizeof (struct mib_local ));if (ret <0 ) {wiphy_err (priv->hw->wiphy, -"at76_get_mib (local) failed: %d\n" , ret); +"at76_get_mib (LOCAL) failed: %d\n" , ret); goto exit; }
@@ -1158,7 +1158,7 @@ static void at76_dump_mib_mdomain(struct at76_priv *priv) sizeof(struct mib_mdomain));if (ret <0 ) {wiphy_err (priv->hw->wiphy, -"at76_get_mib (mdomain) failed: %d\n" , ret); +"at76_get_mib (MDOMAIN) failed: %d\n" , ret); goto exit; }
@@ -1229,7 +1229,7 @@ static int at76_submit_rx_urb(struct at76_priv *priv)struct sk_buff *skb = priv->rx_skb;if (!priv->rx_urb) { -wiphy_err (priv->hw->wiphy,"%s: priv->rx_urb is null\n" , +wiphy_err (priv->hw->wiphy,"%s: priv->rx_urb is NULL\n" , __func__);return -EFAULT ; }
@@ -1792,7 +1792,7 @@ static int at76_mac80211_tx(struct ieee80211_hw *hw, struct sk_buff *skb)wiphy_err (priv->hw->wiphy,"error in tx submit urb: %d\n" , ret);if (ret == -EINVAL )wiphy_err (priv->hw->wiphy, -"-einval: tx urb %p hcpriv %p complete %p\n" , +"-EINVAL: tx urb %p hcpriv %p complete %p\n" , priv->tx_urb, priv->tx_urb->hcpriv, priv->tx_urb->complete); }
@@ -2310,7 +2310,7 @@ static int at76_init_new_device(struct at76_priv *priv, priv->mac80211_registered =1 ; -wiphy_info (priv->hw->wiphy,"usb %s, mac %pM, firmware %d.%d.%d-%d\n" , +wiphy_info (priv->hw->wiphy,"USB %s, MAC %pM, firmware %d.%d.%d-%d\n" ,dev_name (&interface->dev), priv->mac_addr, priv->fw_version.major, priv->fw_version.minor, priv->fw_version.patch, priv->fw_version.build);
drivers/net/wireless/ath/ar9170/main.c +2 -2
@@ -245,7 +245,7 @@ static void __ar9170_dump_txstats(struct ar9170 *ar) {int i; -wiphy_debug (ar->hw->wiphy,"qos queue stats\n" ); +wiphy_debug (ar->hw->wiphy,"QoS queue stats\n" );for (i =0 ; i < __AR9170_NUM_TXQ; i++) wiphy_debug(ar->hw->wiphy,
@@ -387,7 +387,7 @@ static struct sk_buff *ar9170_get_queued_skb(struct ar9170 *ar,if (mac &&compare_ether_addr (ieee80211_get_DA (hdr), mac)) {#ifdef AR9170_QUEUE_DEBUG wiphy_debug (ar->hw->wiphy, -"skip frame => da %pM != %pM\n" , +"skip frame => DA %pM != %pM\n" , mac,ieee80211_get_DA (hdr));ar9170_print_txheader (ar, skb);#endif /* AR9170_QUEUE_DEBUG */
drivers/net/wireless/mac80211_hwsim.c +1 -1
@@ -486,7 +486,7 @@ static bool mac80211_hwsim_tx_frame(struct ieee80211_hw *hw,struct ieee80211_rx_status rx_status;if (data->idle) { -wiphy_debug (hw->wiphy,"trying to tx when idle - reject\n" ); +wiphy_debug (hw->wiphy,"Trying to TX when idle - reject\n" );return false; }
drivers/net/wireless/mwl8k.c +17 -17
@@ -910,14 +910,14 @@ static int mwl8k_rxq_init(struct ieee80211_hw *hw, int index) rxq->rxd =pci_alloc_consistent (priv->pdev, size, &rxq->rxd_dma);if (rxq->rxd ==NULL ) { -wiphy_err (hw->wiphy,"failed to alloc rx descriptors\n" ); +wiphy_err (hw->wiphy,"failed to alloc RX descriptors\n" );return -ENOMEM ; }memset (rxq->rxd,0 , size); rxq->buf =kmalloc (MWL8K_RX_DESCS *sizeof (*rxq->buf),GFP_KERNEL );if (rxq->buf ==NULL ) { -wiphy_err (hw->wiphy,"failed to alloc rx skbuff list\n" ); +wiphy_err (hw->wiphy,"failed to alloc RX skbuff list\n" );pci_free_consistent (priv->pdev, size, rxq->rxd, rxq->rxd_dma);return -ENOMEM ; }
@@ -1145,14 +1145,14 @@ static int mwl8k_txq_init(struct ieee80211_hw *hw, int index) txq->txd =pci_alloc_consistent (priv->pdev, size, &txq->txd_dma);if (txq->txd ==NULL ) { -wiphy_err (hw->wiphy,"failed to alloc tx descriptors\n" ); +wiphy_err (hw->wiphy,"failed to alloc TX descriptors\n" );return -ENOMEM ; }memset (txq->txd,0 , size); txq->skb =kmalloc (MWL8K_TX_DESCS *sizeof (*txq->skb),GFP_KERNEL );if (txq->skb ==NULL ) { -wiphy_err (hw->wiphy,"failed to alloc tx skbuff list\n" ); +wiphy_err (hw->wiphy,"failed to alloc TX skbuff list\n" );pci_free_consistent (priv->pdev, size, txq->txd, txq->txd_dma);return -ENOMEM ; }
@@ -1573,7 +1573,7 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd) PCI_DMA_BIDIRECTIONAL);if (!timeout) { -wiphy_err (hw->wiphy,"command %s timeout after %u ms\n" , +wiphy_err (hw->wiphy,"Command %s timeout after %u ms\n" ,mwl8k_cmd_name (cmd->code, buf,sizeof (buf)),MWL8K_CMD_TIMEOUT_MS ); rc = -ETIMEDOUT ;
@@ -1584,11 +1584,11 @@ static int mwl8k_post_cmd(struct ieee80211_hw *hw, struct mwl8k_cmd_pkt *cmd) rc = cmd->result ? -EINVAL :0 ;if (rc) -wiphy_err (hw->wiphy,"command %s error 0x%x\n" , +wiphy_err (hw->wiphy,"Command %s error 0x%x\n" ,mwl8k_cmd_name (cmd->code, buf,sizeof (buf)),le16_to_cpu (cmd->result));else if (ms >2000 ) -wiphy_notice (hw->wiphy,"command %s took %d ms\n" , +wiphy_notice (hw->wiphy,"Command %s took %d ms\n" ,mwl8k_cmd_name (cmd->code, buf,sizeof (buf)), ms);
@@ -3210,7 +3210,7 @@ static int mwl8k_start(struct ieee80211_hw *hw) rc =request_irq (priv->pdev->irq, mwl8k_interrupt,IRQF_SHARED ,MWL8K_NAME , hw);if (rc) { -wiphy_err (hw->wiphy,"failed to register irq handler\n" ); +wiphy_err (hw->wiphy,"failed to register IRQ handler\n" );return -EIO ; }
@@ -3926,7 +3926,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, priv->sram =pci_iomap (pdev,0 ,0x10000 );if (priv->sram ==NULL ) { -wiphy_err (hw->wiphy,"cannot map device sram\n" ); +wiphy_err (hw->wiphy,"Cannot map device SRAM\n" ); goto err_iounmap; }
@@ -3938,7 +3938,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,if (priv->regs ==NULL ) { priv->regs =pci_iomap (pdev,2 ,0x10000 );if (priv->regs ==NULL ) { -wiphy_err (hw->wiphy,"cannot map device registers\n" ); +wiphy_err (hw->wiphy,"Cannot map device registers\n" ); goto err_iounmap; } }
@@ -3950,14 +3950,14 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,/* Ask userland hotplug daemon for the device firmware */ rc =mwl8k_request_firmware (priv);if (rc) { -wiphy_err (hw->wiphy,"firmware files not found\n" ); +wiphy_err (hw->wiphy,"Firmware files not found\n" ); goto err_stop_firmware; }/* Load firmware into hardware */ rc =mwl8k_load_firmware (hw);if (rc) { -wiphy_err (hw->wiphy,"cannot start firmware\n" ); +wiphy_err (hw->wiphy,"Cannot start firmware\n" ); goto err_stop_firmware; }
@@ -4047,7 +4047,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, rc =request_irq (priv->pdev->irq, mwl8k_interrupt,IRQF_SHARED ,MWL8K_NAME , hw);if (rc) { -wiphy_err (hw->wiphy,"failed to register irq handler\n" ); +wiphy_err (hw->wiphy,"failed to register IRQ handler\n" ); goto err_free_queues; }
@@ -4067,7 +4067,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, rc =mwl8k_cmd_get_hw_spec_sta (hw); }if (rc) { -wiphy_err (hw->wiphy,"cannot initialise firmware\n" ); +wiphy_err (hw->wiphy,"Cannot initialise firmware\n" ); goto err_free_irq; }
@@ -4081,14 +4081,14 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev,/* Turn radio off */ rc =mwl8k_cmd_radio_disable (hw);if (rc) { -wiphy_err (hw->wiphy,"cannot disable\n" ); +wiphy_err (hw->wiphy,"Cannot disable\n" ); goto err_free_irq; }/* Clear MAC address */ rc =mwl8k_cmd_set_mac_addr (hw,NULL ,"\x00\x00\x00\x00\x00\x00" );if (rc) { -wiphy_err (hw->wiphy,"cannot clear mac address\n" ); +wiphy_err (hw->wiphy,"Cannot clear MAC address\n" ); goto err_free_irq; }
@@ -4098,7 +4098,7 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, rc =ieee80211_register_hw (hw);if (rc) { -wiphy_err (hw->wiphy,"cannot register device\n" ); +wiphy_err (hw->wiphy,"Cannot register device\n" ); goto err_free_queues; }
drivers/net/wireless/p54/eeprom.c +3 -3
@@ -167,7 +167,7 @@ static int p54_generate_band(struct ieee80211_hw *dev, }if (j ==0 ) { -wiphy_err (dev->wiphy,"disabling totally damaged %d GHz band\n" , +wiphy_err (dev->wiphy,"Disabling totally damaged %d GHz band\n" , (band ==IEEE80211_BAND_2GHZ ) ?2 :5 ); ret = -ENODATA ;
@@ -695,12 +695,12 @@ int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)u8 perm_addr[ETH_ALEN ];wiphy_warn (dev->wiphy, -"invalid hwaddr! using randomly generated mac addr\n" ); +"Invalid hwaddr! Using randomly generated MAC addr\n" );random_ether_addr (perm_addr);SET_IEEE80211_PERM_ADDR (dev, perm_addr); } -wiphy_info (dev->wiphy,"hwaddr %pM, mac:isl38%02x rf:%s\n" , +wiphy_info (dev->wiphy,"hwaddr %pM, MAC:isl38%02x RF:%s\n" , dev->wiphy->perm_addr, priv->version, p54_rf_chips[priv->rxhw]);
drivers/net/wireless/p54/fwio.c +1 -1
@@ -125,7 +125,7 @@ int p54_parse_firmware(struct ieee80211_hw *dev, const struct firmware *fw)if (fw_version)wiphy_info (priv->hw->wiphy, -"fw rev %s - softmac protocol %x.%x\n" , +"FW rev %s - Softmac protocol %x.%x\n" , fw_version, priv->fw_var >>8 , priv->fw_var &0xff );if (priv->fw_var <0x500 )
drivers/net/wireless/p54/led.c +2 -2
@@ -58,7 +58,7 @@ static void p54_update_leds(struct work_struct *work) err =p54_set_leds (priv);if (err &&net_ratelimit ())wiphy_err (priv->hw->wiphy, -"failed to update leds (%d).\n" , err); +"failed to update LEDs (%d).\n" , err);if (rerun) ieee80211_queue_delayed_work(priv->hw, &priv->led_work,
@@ -103,7 +103,7 @@ static int p54_register_led(struct p54_common *priv, err =led_classdev_register (wiphy_dev (priv->hw->wiphy), &led->led_dev);if (err)wiphy_err (priv->hw->wiphy, -"failed to register %s led.\n" , name); +"Failed to register %s LED.\n" , name);else led->registered =1 ;
drivers/net/wireless/p54/p54pci.c +1 -1
@@ -468,7 +468,7 @@ static int p54p_open(struct ieee80211_hw *dev)P54P_READ (dev_int);if (!wait_for_completion_interruptible_timeout (&priv->boot_comp,HZ )) { -wiphy_err (dev->wiphy,"cannot boot firmware!\n" ); +wiphy_err (dev->wiphy,"Cannot boot firmware!\n" );p54p_stop (dev);return -ETIMEDOUT ; }
drivers/net/wireless/p54/txrx.c +1 -1
@@ -540,7 +540,7 @@ static void p54_rx_trap(struct p54_common *priv, struct sk_buff *skb)case P54_TRAP_BEACON_TX :break ;case P54_TRAP_RADAR : -wiphy_info (priv->hw->wiphy,"radar (freq:%d mhz)\n" , freq); +wiphy_info (priv->hw->wiphy,"radar (freq:%d MHz)\n" , freq);break ;case P54_TRAP_NO_BEACON :if (priv->vif)
drivers/net/wireless/rtl818x/rtl8180_dev.c +3 -3
@@ -445,7 +445,7 @@ static int rtl8180_init_rx_ring(struct ieee80211_hw *dev) &priv->rx_ring_dma);if (!priv->rx_ring || (unsigned long )priv->rx_ring &0xFF ) { -wiphy_err (dev->wiphy,"cannot allocate rx ring\n" ); +wiphy_err (dev->wiphy,"Cannot allocate RX ring\n" );return -ENOMEM ; }
@@ -502,7 +502,7 @@ static int rtl8180_init_tx_ring(struct ieee80211_hw *dev, ring =pci_alloc_consistent (priv->pdev,sizeof (*ring) * entries, &dma);if (!ring || (unsigned long )ring &0xFF ) { -wiphy_err (dev->wiphy,"cannot allocate tx ring (prio = %d)\n" , +wiphy_err (dev->wiphy,"Cannot allocate TX ring (prio = %d)\n" , prio);return -ENOMEM ; }
@@ -568,7 +568,7 @@ static int rtl8180_start(struct ieee80211_hw *dev) ret =request_irq (priv->pdev->irq, rtl8180_interrupt,IRQF_SHARED ,KBUILD_MODNAME , dev);if (ret) { -wiphy_err (dev->wiphy,"failed to register irq handler\n" ); +wiphy_err (dev->wiphy,"failed to register IRQ handler\n" ); goto err_free_rings; }
drivers/net/wireless/rtl818x/rtl8187_dev.c +2 -2
@@ -573,7 +573,7 @@ static int rtl8187_cmd_reset(struct ieee80211_hw *dev) }while (--i);if (!i) { -wiphy_err (dev->wiphy,"reset timeout!\n" ); +wiphy_err (dev->wiphy,"Reset timeout!\n" );return -ETIMEDOUT ; }
@@ -1526,7 +1526,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,mutex_init (&priv->conf_mutex);skb_queue_head_init (&priv->b_tx_status.queue); -wiphy_info (dev->wiphy,"hwaddr %pM, %s v%d + %s, rfkill mask %d\n" , +wiphy_info (dev->wiphy,"hwaddr %pM, %s V%d + %s, rfkill mask %d\n" , mac_addr, chip_name, priv->asic_rev, priv->rf->name, priv->rfkill_mask);
drivers/net/wireless/rtl818x/rtl8187_rtl8225.c +2 -2
@@ -366,7 +366,7 @@ static void rtl8225_rf_init(struct ieee80211_hw *dev)rtl8225_write (dev,0x02 ,0x044d );msleep (100 );if (!(rtl8225_read (dev,6 ) & (1 <<7 ))) -wiphy_warn (dev->wiphy,"rf calibration failed! %x\n" , +wiphy_warn (dev->wiphy,"RF Calibration Failed! %x\n" ,rtl8225_read (dev,6 )); }
@@ -735,7 +735,7 @@ static void rtl8225z2_rf_init(struct ieee80211_hw *dev)rtl8225_write (dev,0x02 ,0x044D );msleep (100 );if (!(rtl8225_read (dev,6 ) & (1 <<7 ))) -wiphy_warn (dev->wiphy,"rf calibration failed! %x\n" , +wiphy_warn (dev->wiphy,"RF Calibration Failed! %x\n" ,rtl8225_read (dev,6 )); }