Skip to contentSkip to conversation

s5pc110: SDHCI-s3c can override host capabilities

PATCH In review [email protected] 1 participant 1 message Aug 19, 2010

Subsystems (3)
Arm (32-bit) Arm sub-architectures MMC, SD and SDIO
lore
Share & tools
lore

[email protected]

author
#0 lore raw

PATCH 10/20 s5pc110: SDHCI-s3c can override host capabilities

From: Kyungmin Park <[email protected]>

Each board can override the default sdhci host capabilities. Some board has broken features by hardwares and support 8-bit bandwidth.

Signed-off-by Kyungmin Park <[email protected]>
Cc <[email protected]>
Signed-off-by Andrew Morton <[email protected]>

---

 arch/arm/plat-samsung/dev-hsmmc.c  |    2 ++
 arch/arm/plat-samsung/dev-hsmmc1.c |    2 ++
 arch/arm/plat-samsung/dev-hsmmc2.c |    2 ++
 3 files changed, 6 insertions(+)
arch/arm/plat-samsung/dev-hsmmc.c renamed from arch/arm/plat-samsung/dev-hsmmc.c~s5pc110-sdhci-s3c-can-override-host-capabilities +2 -0
diff -puN arch/arm/plat-samsung/dev-hsmmc.c~s5pc110-sdhci-s3c-can-override-host-capabilities arch/arm/plat-samsung/dev-hsmmc.c
@@ -70,4 +70,6 @@ void s3c_sdhci0_set_platdata(struct s3c_
 		set->cfg_gpio = pd->cfg_gpio;
 	if (pd->cfg_card)
 		set->cfg_card = pd->cfg_card;
+	if (pd->host_caps)
+		set->host_caps = pd->host_caps;
 }
arch/arm/plat-samsung/dev-hsmmc1.c renamed from arch/arm/plat-samsung/dev-hsmmc1.c~s5pc110-sdhci-s3c-can-override-host-capabilities +2 -0
diff -puN arch/arm/plat-samsung/dev-hsmmc1.c~s5pc110-sdhci-s3c-can-override-host-capabilities arch/arm/plat-samsung/dev-hsmmc1.c
@@ -70,4 +70,6 @@ void s3c_sdhci1_set_platdata(struct s3c_
 		set->cfg_gpio = pd->cfg_gpio;
 	if (pd->cfg_card)
 		set->cfg_card = pd->cfg_card;
+	if (pd->host_caps)
+		set->host_caps = pd->host_caps;
 }
arch/arm/plat-samsung/dev-hsmmc2.c renamed from arch/arm/plat-samsung/dev-hsmmc2.c~s5pc110-sdhci-s3c-can-override-host-capabilities +2 -0
diff -puN arch/arm/plat-samsung/dev-hsmmc2.c~s5pc110-sdhci-s3c-can-override-host-capabilities arch/arm/plat-samsung/dev-hsmmc2.c
@@ -71,4 +71,6 @@ void s3c_sdhci2_set_platdata(struct s3c_
 		set->cfg_gpio = pd->cfg_gpio;
 	if (pd->cfg_card)
 		set->cfg_card = pd->cfg_card;
+	if (pd->host_caps)
+		set->host_caps = pd->host_caps;
 }

_