U-Boot-pxa pull request
Hi, please pull my git://git.denx.de/u-boot-pxa for-wd-master branch into your - master branch. Thanks
The following changes since commit bd2313078114c4b44c4a5ce149af43bcb7fc8854:
Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master (2010-08-18
21:16:35 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-pxa.git for-wd-master
Marek Vasut (8):
PXA: pxafb: Add ACX517AKN support
common: Enable serial for PXA250
PXA: Palm Tungsten|C Support
PXA: pxafb: Add support for Sharp LQ038J7DH53
PXA: Add initial Palm LifeDrive support
PXA: Voipac270 improvements
PXA: Balloon3 board support
PXA: Add missing MAINTAINERS entries
MAINTAINERS | 9 ++ MAKEALL | 6 +- Makefile | 7 +- arch/arm/cpu/pxa/pxafb.c | 68 ++++++++++ board/balloon3/Makefile | 49 +++++++ board/balloon3/balloon3.c | 224 ++++++++++++++++++++++++++++++++ board/balloon3/config.mk | 1 + board/balloon3/lowlevel_init.S | 36 ++++++ board/balloon3/u-boot.lds | 55 ++++++++ board/palmld/Makefile | 49 +++++++ board/palmld/config.mk | 1 + board/palmld/lowlevel_init.S | 45 +++++++ board/palmld/palmld.c | 68 ++++++++++ board/palmld/u-boot.lds | 56 ++++++++ board/palmtc/Makefile | 49 +++++++ board/palmtc/config.mk | 1 + board/palmtc/lowlevel_init.S | 39 ++++++ board/palmtc/palmtc.c | 58 +++++++++ board/palmtc/u-boot.lds | 56 ++++++++ board/vpac270/Makefile | 7 +- board/vpac270/lowlevel_init.S | 1 - board/vpac270/vpac270.c | 41 +++---- boards.cfg | 3 + common/serial.c | 2 +- include/configs/balloon3.h | 269 +++++++++++++++++++++++++++++++++++++++ include/configs/palmld.h | 273 ++++++++++++++++++++++++++++++++++++++++ include/configs/palmtc.h | 247 ++++++++++++++++++++++++++++++++++++ include/configs/vpac270.h | 106 +++++++++------- 28 files changed, 1746 insertions(+), 80 deletions(-) create mode 100644 board/balloon3/Makefile create mode 100644 board/balloon3/balloon3.c create mode 100644 board/balloon3/config.mk create mode 100644 board/balloon3/lowlevel_init.S create mode 100644 board/balloon3/u-boot.lds create mode 100644 board/palmld/Makefile create mode 100644 board/palmld/config.mk create mode 100644 board/palmld/lowlevel_init.S create mode 100644 board/palmld/palmld.c create mode 100644 board/palmld/u-boot.lds create mode 100644 board/palmtc/Makefile create mode 100644 board/palmtc/config.mk create mode 100644 board/palmtc/lowlevel_init.S create mode 100644 board/palmtc/palmtc.c create mode 100644 board/palmtc/u-boot.lds create mode 100644 include/configs/balloon3.h create mode 100644 include/configs/palmld.h create mode 100644 include/configs/palmtc.h
Dear Marek Vasut,
Quoted 8 lines · In message <[email protected]> you wrote:
Hi, please pull my
git://git.denx.de/u-boot-pxafor-wd-master branch into your - master branch. ThanksThe following changes since commit
bd2313078114c4b44c4a5ce149af43bcb7fc8854:Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master (2010-08-18
21:16:35 +0200)
Quoted 6 lines
are available in the git repository at:
git://git.denx.de/u-boot-pxa.gitfor-wd-masterMarek Vasut (8):
PXA: pxafb: Add ACX517AKN support
You probably should have asked for Anatolij's ACK for this patch.
Quoted 3 lines
common: Enable serial for PXA250
PXA: Palm Tungsten|C Support
PXA: pxafb: Add support for Sharp LQ038J7DH53
And for this one, too.
Quoted 2 lines
PXA: Add initial Palm LifeDrive support
PXA: Voipac270 improvements
I have some issues with this commit.
Quoted 1 line
PXA: Balloon3 board support
And with this one.
Quoted 1 line
PXA: Add missing
MAINTAINERSentries
Waiting for feedback, not pulled.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
News is what a chap who doesn't care much about anything wants to
read. And it's only news until he's read it. After that it's dead.
- Evelyn Waugh _Scoop_ (1938) bk. 1, ch. 5