Skip to contentSkip to conversation

xfsprogs: minimum version with these commands

DISCUSSION Bogdan 3 participants 8 messages Aug 29, 2010 – Sep 3, 2010

lore
Share & tools
lore

Bogdan

author
#0 lore raw

Hello.

I couldn't find this information in the xfsprogs ChangeLog, so I'm
asking here: what is the minimum version of xfsprogs to:

1) contain these utilities: xfs_db, xfs_freeze, xfs_check, and
2) xfs_db accepts the following command-line parameters: -i, -c, and
3) xfs_freeze accepts the following command-line parameters: -f, -u, and
4) xfs_db accepts the following interactive mode commands: "freesp -d", "quit", "blockget -n", "ncheck", "sb 0", "print".

Or is there a ChangeLog that covers all xfsprogs versions in such
deatil that I would be able to find this myself? If so, where can I find it?

Signature · 9 lines
Pozdrawiam/Regards - Bogdan                     (GNU/Linux & FreeDOS)
Kurs asemblera x86 (DOS, GNU/Linux):http://rudy.mif.pg.gda.pl/~bogdro
Grupy dyskusyjne o asm:  pl.comp.lang.asm alt.pl.asm alt.pl.asm.win32
www.Xiph.org   www.TorProject.org   Soft (EN): miniurl.pl/bogdro-soft

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
#1 lore raw
Quoted 10 lines · Bogdan

Hello.

I couldn't find this information in the xfsprogs ChangeLog, so I'm
asking here: what is the minimum version of xfsprogs to:

1) contain these utilities: xfs_db, xfs_freeze, xfs_check, and
2) xfs_db accepts the following command-line parameters: -i, -c, and
3) xfs_freeze accepts the following command-line parameters: -f, -u, and
4) xfs_db accepts the following interactive mode commands: "freesp -d", "quit", "blockget -n", "ncheck", "sb 0", "print".

I am not surprised that changelogs do not mention when "quit" was added to xfs_db ...!

Quoted 4 lines

Or is there a ChangeLog that covers all xfsprogs versions in such
deatil that I would be able to find this myself? If so, where can I find it?

You could look at git and/or cvs history/blame to see when commands & options were added.

Most of the things you ask about are SO OLD it will take some digging through renames and moves.

Do you really need to know if "xfs_check" was added in 1994, or 1995, for example? :)

This strikes me as a bit of an odd question; what is your motivation here?

-Eric

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs

#2 lore raw
Quoted 2 lines · On Montag, 30. August 2010 Eric Sandeen wrote:

This strikes me as a bit of an odd question; what is your motivation
here?

I'd guess they have a program using that features, and they want to tell people "this needs at least version X of xfsprogs".

Signature · 13 lines
mit freundlichen Grüssen,
Michael Monnerie, Ing. BSc

it-management Internet Services
http://proteger.at [gesprochen: Prot-e-schee]
Tel: 0660 / 415 65 31

****** Aktuelles Radiointerview! ******
http://www.it-podcast.at/aktuelle-sendung.html

// Wir haben im Moment zwei Häuser zu verkaufen:
// http://zmi.at/langegg/
// http://zmi.at/haus2009/

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs

author
#3 lore raw
In reply to Eric Sandeen
Quoted 6 lines · Eric Sandeen
Quoted 5 lines · Bogdan

Hello.

I couldn't find this information in the xfsprogs ChangeLog, so I'm
asking here: what is the minimum version of xfsprogs to:

Quoted 8 lines
Quoted 5 lines

1) contain these utilities: xfs_db, xfs_freeze, xfs_check, and
2) xfs_db accepts the following command-line parameters: -i, -c, and
3) xfs_freeze accepts the following command-line parameters: -f, -u, and
4) xfs_db accepts the following interactive mode commands: "freesp -d", "quit", "blockget -n", "ncheck", "sb 0", "print".

I am not surprised that changelogs do not mention when "quit" was added to xfs_db ...!

It could have been "exit" one day in the past, right?

Quoted 8 lines
Quoted 5 lines

Or is there a ChangeLog that covers all xfsprogs versions in such
deatil that I would be able to find this myself? If so, where can I find it?

You could look at git and/or cvs history/blame to see when commands & options were added.

Is everything really there? How do I get these?

Quoted 2 lines

Most of the things you ask about are SO OLD it will take some digging through renames and moves.

I thought so. I'm surprised such things as added commands aren't in
the ChangeLog, unless they were present from the first version.

Quoted 2 lines

Do you really need to know if "xfs_check" was added in 1994, or 1995, for example? :)

No. I need to know what was the first version of the xfsprogs package
that contained this program. The version number, not the year.

Quoted 1 line

This strikes me as a bit of an odd question; what is your motivation here?

I'm writing a program that executes xfs_db and other processes,
passes commands to them and reads replies. Now I want to know what the minimum required version is to be sure that these commands are accepted. I know this might seem strange, but I'd like to know this in more detail, so I can say "requires xfsprogs version X.Y.Z or newer" instead of "requires xfsprogs" (which would imply that all versions work, and this might not be the case). If it would be "1.0.0", great. But I wanted to be sure.

Signature · 9 lines
Pozdrawiam/Regards - Bogdan                     (GNU/Linux & FreeDOS)
Kurs asemblera x86 (DOS, GNU/Linux):http://rudy.mif.pg.gda.pl/~bogdro
Grupy dyskusyjne o asm:  pl.comp.lang.asm alt.pl.asm alt.pl.asm.win32
www.Xiph.org   www.TorProject.org   Soft (EN): miniurl.pl/bogdro-soft

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
#4 lore raw
Quoted 12 lines · Bogdan
Quoted 11 lines · Eric Sandeen
Quoted 10 lines · Bogdan

Hello.

I couldn't find this information in the xfsprogs ChangeLog, so I'm
asking here: what is the minimum version of xfsprogs to:

1) contain these utilities: xfs_db, xfs_freeze, xfs_check, and
2) xfs_db accepts the following command-line parameters: -i, -c, and
3) xfs_freeze accepts the following command-line parameters: -f, -u, and
4) xfs_db accepts the following interactive mode commands: "freesp -d", "quit", "blockget -n", "ncheck", "sb 0", "print".

Quoted 4 lines
Quoted 2 lines

I am not surprised that changelogs do not mention when "quit" was added to xfs_db ...!

It could have been "exit" one day in the past, right?

It could have been, but if it was "quit" from day one, that's never going to make it to a changelog. :)

Quoted 8 lines
Quoted 6 lines
Quoted 4 lines

Or is there a ChangeLog that covers all xfsprogs versions in such
deatil that I would be able to find this myself? If so, where can I find it?

You could look at git and/or cvs history/blame to see when commands & options were added.

Is everything really there? How do I get these?

http://oss.sgi.com/cgi-bin/gitweb.cgi?p=xfs/cmds/xfsprogs.git
http://oss.sgi.com/cgi-bin/gitweb.cgi?p=xfs/cmds/xfsdump.git

http://oss.sgi.com/cgi-bin/cvsweb.cgi/xfs-cmds/

Most everything should be there.

Quoted 11 lines
Quoted 2 lines

Most of the things you ask about are SO OLD it will take some digging through renames and moves.

I thought so. I'm surprised such things as added commands aren't in
the ChangeLog, unless they were present from the first version.

Quoted 2 lines

Do you really need to know if "xfs_check" was added in 1994, or 1995, for example? :)

No. I need to know what was the first version of the xfsprogs package
that contained this program. The version number, not the year.

well, equivalently, do you care if it was version 1.0.0 or 1.0.1, from the 1990's era.

For everything you asked about, I think they've all been there since inception.

I think picking a version from maybe 5 years ago and checking that the commands are all there would suffice; it would be -very- unlikely that anything older is still in use.

Quoted 10 lines
Quoted 1 line

This strikes me as a bit of an odd question; what is your motivation here?

I'm writing a program that executes xfs_db and other processes,
passes commands to them and reads replies. Now I want to know what the minimum required version is to be sure that these commands are accepted. I know this might seem strange, but I'd like to know this in more detail, so I can say "requires xfsprogs version X.Y.Z or newer" instead of "requires xfsprogs" (which would imply that all versions work, and this might not be the case). If it would be "1.0.0", great. But I wanted to be sure.

Ok, understood.

I think the fastest route, since nothing you asked for is particularly "new" would be to just grab a sufficiently old version and double check that the commands are there. Easier than chasing through the repository, I think.

-Eric

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs

author
#5 lore raw
Quoted 9 lines · Eric Sandeen
Quoted 1 line · Bogdan

Is everything really there? How do I get these?

http://oss.sgi.com/cgi-bin/gitweb.cgi?p=xfs/cmds/xfsprogs.git
http://oss.sgi.com/cgi-bin/gitweb.cgi?p=xfs/cmds/xfsdump.git

http://oss.sgi.com/cgi-bin/cvsweb.cgi/xfs-cmds/

Most everything should be there.

Starting from version 3, as I can see. I couldn't go further in the past.

Quoted 9 lines
Quoted 9 lines
Quoted 2 lines

Most of the things you ask about are SO OLD it will take some digging through renames and moves.

I thought so. I'm surprised such things as added commands aren't in
the ChangeLog, unless they were present from the first version.

Quoted 2 lines

Do you really need to know if "xfs_check" was added in 1994, or 1995, for example? :)

Quoted 8 lines
Quoted 2 lines

No. I need to know what was the first version of the xfsprogs package
that contained this program. The version number, not the year.

well, equivalently, do you care if it was version 1.0.0 or 1.0.1, from the 1990's era.

For everything you asked about, I think they've all been there since inception.

That would be good.

Quoted 3 lines

I think picking a version from maybe 5 years ago and checking that the commands are all there would suffice; it would be -very- unlikely that anything older is still in use.

Hopefully. I got some versions like 2.0.3 and 2.7.11. Where do I get
older?

Quoted 11 lines
Quoted 10 lines
Quoted 1 line

This strikes me as a bit of an odd question; what is your motivation here?

I'm writing a program that executes xfs_db and other processes,
passes commands to them and reads replies. Now I want to know what the minimum required version is to be sure that these commands are accepted. I know this might seem strange, but I'd like to know this in more detail, so I can say "requires xfsprogs version X.Y.Z or newer" instead of "requires xfsprogs" (which would imply that all versions work, and this might not be the case). If it would be "1.0.0", great. But I wanted to be sure.

Quoted 6 lines

Ok, understood.

I think the fastest route, since nothing you asked for is particularly "new" would be to just grab a sufficiently old version and double check that the commands are there. Easier than chasing through the repository, I think.

Surely. But where do I get such old versions?

Signature · 9 lines
Pozdrawiam/Regards - Bogdan                     (GNU/Linux & FreeDOS)
Kurs asemblera x86 (DOS, GNU/Linux):http://rudy.mif.pg.gda.pl/~bogdro
Grupy dyskusyjne o asm:  pl.comp.lang.asm alt.pl.asm alt.pl.asm.win32
www.Xiph.org   www.TorProject.org   Soft (EN): miniurl.pl/bogdro-soft

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
#6 lore raw
Quoted 7 lines · Bogdan
Quoted 4 lines

I think the fastest route, since nothing you asked for is particularly "new" would be to just grab a sufficiently old version and double check that the commands are there. Easier than chasing through the repository, I think.

Surely. But where do I get such old versions?

CVS should have older but that can be hard to work with

If it's ok with you to use old fedora src.rpms, try:

http://kojipkgs.fedoraproject.org/packages/xfsprogs

which goes back to 2.8.11 in Apr. 2007.

Ah I just found:

ftp://oss.sgi.com/projects/xfs/previous/cmd_tars/xfsprogs-2.7.11.src.tar.gz

as well.

I really think any serious user of xfs will not be using tools which are more than 5 years old, so if these versions satisfy your requirements, I wouldn't worry too much about whether older versions do as well...

-Eric

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs

author
#7 lore raw
Quoted 20 lines · Eric Sandeen
Quoted 7 lines · Bogdan
Quoted 4 lines

I think the fastest route, since nothing you asked for is particularly "new" would be to just grab a sufficiently old version and double check that the commands are there. Easier than chasing through the repository, I think.

Surely. But where do I get such old versions?

CVS should have older but that can be hard to work with

If it's ok with you to use old fedora src.rpms, try:

http://kojipkgs.fedoraproject.org/packages/xfsprogs

which goes back to 2.8.11 in Apr. 2007.

Ah I just found:

Quoted 8 lines

ftp://oss.sgi.com/projects/xfs/previous/cmd_tars/xfsprogs-2.7.11.src.tar.gz

as well.

I really think any serious user of xfs will not be using tools which are more than 5 years old, so if these versions satisfy your requirements, I wouldn't worry too much about whether older versions do as well...

OK, thank you for your time and help.

Signature · 9 lines
Pozdrawiam/Regards - Bogdan                     (GNU/Linux & FreeDOS)
Kurs asemblera x86 (DOS, GNU/Linux):http://rudy.mif.pg.gda.pl/~bogdro
Grupy dyskusyjne o asm:  pl.comp.lang.asm alt.pl.asm alt.pl.asm.win32
www.Xiph.org   www.TorProject.org   Soft (EN): miniurl.pl/bogdro-soft

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs