Skip to contentSkip to conversation

ARM: mach-shmobile: Use evt2irq() for sh7372 DMAC

PATCH New Magnus Damm 1 participant 1 message Aug 31, 2010

Subsystems (4)
Arm (32-bit) Arm sub-architectures SuperH Arm/RISC-V/Renesas architecture
lore
Share & tools
lore

Magnus Damm

author maintainer
#0 lore raw

PATCH 1/1 ARM: mach-shmobile: Use evt2irq() for sh7372 DMAC

From: Magnus Damm <[email protected]>

Use evt2irq() for DMAC resources on sh7372.

This makes the code easier to read and also
allows adjusting the INTC base offset without
breaking platform data.

Signed-off-by Magnus Damm <[email protected]>

---

 arch/arm/mach-shmobile/setup-sh7372.c |   24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)
arch/arm/mach-shmobile/setup-sh7372.c +12 -12
@@ -419,14 +419,14 @@ static struct resource sh7372_dmae0_reso
 	},
 	{
 		/* DMA error IRQ */
-		.start	= 246,
-		.end	= 246,
+		.start	= evt2irq(0x20c0),
+		.end	= evt2irq(0x20c0),
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
 		/* IRQ for channels 0-5 */
-		.start	= 240,
-		.end	= 245,
+		.start	= evt2irq(0x2000),
+		.end	= evt2irq(0x20a0),
 		.flags	= IORESOURCE_IRQ,
 	},
 };

@@ -447,14 +447,14 @@ static struct resource sh7372_dmae1_reso
 	},
 	{
 		/* DMA error IRQ */
-		.start	= 254,
-		.end	= 254,
+		.start	= evt2irq(0x21c0),
+		.end	= evt2irq(0x21c0),
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
 		/* IRQ for channels 0-5 */
-		.start	= 248,
-		.end	= 253,
+		.start	= evt2irq(0x2100),
+		.end	= evt2irq(0x21a0),
 		.flags	= IORESOURCE_IRQ,
 	},
 };

@@ -475,14 +475,14 @@ static struct resource sh7372_dmae2_reso
 	},
 	{
 		/* DMA error IRQ */
-		.start	= 262,
-		.end	= 262,
+		.start	= evt2irq(0x22c0),
+		.end	= evt2irq(0x22c0),
 		.flags	= IORESOURCE_IRQ,
 	},
 	{
 		/* IRQ for channels 0-5 */
-		.start	= 256,
-		.end	= 261,
+		.start	= evt2irq(0x2200),
+		.end	= evt2irq(0x22a0),
 		.flags	= IORESOURCE_IRQ,
 	},
 };