XFS Quota Check OOM
Hi,
on one of our systems i want to activate prjquota support. The relevant disk is the root disk so i added prjquota to rootflags kernel line.
But when i do so i always get OOM out of Memory while checking quota's. I also upgraded the system from 8GB to 16GB RAM but still the same. Kernel is vanilla 2.6.32.19.
Stefan
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
i already run an xfs_repair over the drive but no results...
Stefan
Am 30.08.2010 14:14, schrieb Stefan Priebe - Profihost AG:
Quoted 9 lines
Hi,
on one of our systems i want to activate prjquota support. The relevant disk is the root disk so i added prjquota to rootflags kernel line.
But when i do so i always get OOM out of Memory while checking quota's. I also upgraded the system from 8GB to 16GB RAM but still the same. Kernel is vanilla 2.6.32.19.
Quoted 6 lines
Stefan
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Can really nobody help :-(
Stefan
Am 30.08.2010 14:14, schrieb Stefan Priebe - Profihost AG:
Quoted 9 lines
Hi,
on one of our systems i want to activate prjquota support. The relevant disk is the root disk so i added prjquota to rootflags kernel line.
But when i do so i always get OOM out of Memory while checking quota's. I also upgraded the system from 8GB to 16GB RAM but still the same. Kernel is vanilla 2.6.32.19.
Quoted 6 lines
Stefan
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Le Tue, 31 Aug 2010 09:36:30 +0200 vous écriviez:
Quoted 1 line
Can really nobody help :-(
What is the size of the filesystem, output of xfs_info, output of uname -a, version of xfs_utils?
What are the main tasks of the system, memory wise?
Signature · 11 lines
------------------------------------------------------------------------
Emmanuel Florac | Direction technique
| Intellique
| <[email protected]>
| +33 1 78 94 84 02
------------------------------------------------------------------------
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfsHi!
Disk Size:/dev/sda3 4.8T 2.7T 2.2T 55% /
uname -a:
Linux abc 2.6.32.19intel #1 SMP Wed Aug 18 15:46:03 CEST 2010 x86_64 GNU/Linux
xfs_info /dev/sda3
meta-data=/dev/sda3 isize=256 agcount=32, agsize=40038461 blks
= sectsz=512 attr=0
data = bsize=4096 blocks=1281230752, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096
log =internal bsize=4096 blocks=32768, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0xfs_utils: Actual Debian Version:xfs_quota -Vxfs_quota version 2.9.8
Mein Task is nothing - just to store a lot of Data once per day.
Stefan
Am 31.08.2010 10:44, schrieb Emmanuel Florac:
Quoted 8 lines
Le Tue, 31 Aug 2010 09:36:30 +0200 vous écriviez:
Quoted 1 line
Can really nobody help :-(
What is the size of the filesystem, output of
xfs_info, output of uname -a, version ofxfs_utils?
What are the main tasks of the system, memory wise?
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Le Tue, 31 Aug 2010 14:25:40 +0200 vous écriviez:
Quoted 2 lines
Disk Size:
/dev/sda34.8T 2.7T 2.2T 55% /
This is really very very weird. Why on earth would you use such a big root filesystem? It is extremely impractical and dangerous to store data on the root filesystem. Do you have any good reason not to have a small root filesystem and a distinct data one?
Signature · 11 lines
------------------------------------------------------------------------
Emmanuel Florac | Direction technique
| Intellique
| <[email protected]>
| +33 1 78 94 84 02
------------------------------------------------------------------------
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfsOh we don't do this today. But it is a really old system where someone someday decided to do that. Sadly i can't change this...
Stefan
Am 31.08.2010 14:43, schrieb Emmanuel Florac:
Quoted 10 lines
Le Tue, 31 Aug 2010 14:25:40 +0200 vous écriviez:
Quoted 2 lines
Disk Size:
/dev/sda34.8T 2.7T 2.2T 55% /This is really very very weird. Why on earth would you use such a big root filesystem? It is extremely impractical and dangerous to store data on the root filesystem. Do you have any good reason not to have a small root filesystem and a distinct data one?
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Le Tue, 31 Aug 2010 14:56:40 +0200 vous écriviez:
Quoted 3 lines
Oh we don't do this today. But it is a really old system where someone someday decided to do that. Sadly i can't change this...
Did you upgrade the kernel recently? Or simply enabled quotas?
Signature · 11 lines
------------------------------------------------------------------------
Emmanuel Florac | Direction technique
| Intellique
| <[email protected]>
| +33 1 78 94 84 02
------------------------------------------------------------------------
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfsHi!
After booting the System to a RAM Image with prjquota (the quota check wents fine) and upgrading to xfsprogs 3.1.3.
I'm getting this when trying to setup a project Quota:xfs_quota -x -c "project -s 2" /
Setting up project 2 (path /serverbackup/abc)...
Processed 1 (/etc/projects and cmdline) paths for project 2 with recursion depth infinite (-1).
cat /etc/projects
2:/serverbackup/abc
cat /etc/projid
abc:2
ls -la /serverbackup/abc/
total 102412
drwxr-xr-x 2 root root 16 Aug 24 00:41 .
drwxr-xr-x 62 root root 8192 Aug 31 13:05 ..
-rw-r--r-- 1 root root 104857600 Aug 24 00:41 abc
mount/dev/sda3 on / type xfs (rw,noatime,nodiratime,nobarrier,prjquota)
Stefan
Am 31.08.2010 15:20, schrieb Emmanuel Florac:
Quoted 8 lines
Le Tue, 31 Aug 2010 14:56:40 +0200 vous écriviez:
Quoted 3 lines
Oh we don't do this today. But it is a really old system where someone someday decided to do that. Sadly i can't change this...
Did you upgrade the kernel recently? Or simply enabled quotas?
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 10 lines · Stefan Priebe - Profihost AG
Hi!
After booting the System to a RAM Image with prjquota (the quota check wents fine) and upgrading to xfsprogs 3.1.3.
I'm getting this when trying to setup a project Quota:
xfs_quota-x -c "project -s 2" /
Setting up project 2 (path /serverbackup/abc)... Processed 1 (/etc/projectsand cmdline) paths for project 2 with recursion depth infinite (-1).
That's normal, I think. Adding project quota involves descending the directory heirachy specified and adding the project id to every file and directory. You can limit the recursion depth it runs to if you want to, but the default (infinite) is to walk the entire heirarchy.
You can confirm by running a quota report and checking the output...
Cheers,
Dave.
Signature · 7 lines
Dave Chinner [email protected] _______________________________________________ xfs mailing list [email protected] http://oss.sgi.com/mailman/listinfo/xfs
quota report returns nothing... :-( except two newlines...
# xfs_quota -x -c "report -phnN" /
#
Stefan
Am 01.09.2010 01:28, schrieb Dave Chinner:
Quoted 17 lines · Stefan Priebe - Profihost AG
Quoted 10 lines
Hi!
After booting the System to a RAM Image with prjquota (the quota check wents fine) and upgrading to xfsprogs 3.1.3.
I'm getting this when trying to setup a project Quota:
xfs_quota-x -c "project -s 2" /
Setting up project 2 (path /serverbackup/abc)... Processed 1 (/etc/projectsand cmdline) paths for project 2 with recursion depth infinite (-1).That's normal, I think. Adding project quota involves descending the directory heirachy specified and adding the project id to every file and directory. You can limit the recursion depth it runs to if you want to, but the default (infinite) is to walk the entire heirarchy.
Quoted 5 lines
You can confirm by running a quota report and checking the output...
Cheers,
Dave.
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs
Quoted 9 lines · Stefan Priebe - Profihost AG
Hi,
on one of our systems i want to activate prjquota support. The relevant disk is the root disk so i added prjquota to rootflags kernel line.
But when i do so i always get OOM out of Memory while checking quota's. I also upgraded the system from 8GB to 16GB RAM but still the same. Kernel is vanilla 2.6.32.19.
Can you post your kernel log with the OOM messages and if existing any messages from XFS before that?
_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs