mrst_earlyprintk: add a kmsg_dumper to dump the printk buffer when panic
Subsystems (2)
PATCH 1/5 mrst_earlyprintk: add a kmsg_dumper to dump the printk buffer when panic
From: Feng Tang <[email protected]>
As normal max3110 console can't work during panic case, add a helper function which make debug easier
Signed-off-by Feng Tang <[email protected]>
Signed-off-by Alan Cox <[email protected]>
---
arch/x86/Kconfig | 18 ++ arch/x86/Kconfig.debug | 4 + arch/x86/include/asm/mrst.h | 5 + arch/x86/kernel/Makefile | 1 arch/x86/kernel/early_printk.c | 5 + arch/x86/kernel/mrst_earlyprintk.c | 283 ++++++++++++++++++++++++++++++++++++ 6 files changed, 311 insertions(+), 5 deletions(-) create mode 100644 arch/x86/kernel/mrst_earlyprintk.c
arch/x86/Kconfig +13 -5
@@ -420,6 +420,14 @@ config X86_MRST nor standard legacy replacement devices/features. e.g. Moorestown does not contain i8259, i8254, HPET, legacy BIOS, most of the io ports. +config MRST_SPI_UART_BOOT_MSG + def_bool y + prompt "Moorestown SPI UART boot message" + depends on (X86_MRST && X86_32) + help + Enable this to see boot message during protected mode boot phase, such as + kernel decompression, BAUD rate is set at 115200 8n1 + config X86_RDC321X bool "RDC R-321x SoC" depends on X86_32
@@ -630,11 +638,11 @@ config APB_TIMER def_bool y if MRST prompt "Langwell APB Timer Support" if X86_MRST help - APB timer is the replacement for 8254, HPET on X86 MID platforms. - The APBT provides a stable time base on SMP - systems, unlike the TSC, but it is more expensive to access, - as it is off-chip. APB timers are always running regardless of CPU - C states, they are used as per CPU clockevent device when possible. + APB timer is the replacement for 8254, HPET on X86 MID platforms. + The APBT provides a stable time base on SMP + systems, unlike the TSC, but it is more expensive to access, + as it is off-chip. APB timers are always running regardless of CPU + C states, they are used as per CPU clockevent device when possible. # Mark as embedded because too many people got it wrong. # The code disables itself when not needed.
arch/x86/Kconfig.debug +4 -0
@@ -43,6 +43,10 @@ config EARLY_PRINTK with klogd/syslogd or the X server. You should normally N here, unless you want to debug such a crash. +config X86_MRST_EARLY_PRINTK + bool "Early printk for MRST platform support" + depends on EARLY_PRINTK && X86_MRST + config EARLY_PRINTK_DBGP bool "Early printk via EHCI debug port" depends on EARLY_PRINTK && PCI
arch/x86/include/asm/mrst.h +5 -0
@@ -10,6 +10,9 @@*/ #ifndef _ASM_X86_MRST_H#define _ASM_X86_MRST_H + +#include <linux/sfi.h> +extern int pci_mrst_init (void );int __init sfi_parse_mrtc (struct sfi_table_header *table);
@@ -42,4 +45,6 @@ extern enum mrst_timer_options mrst_timer_options;#define SFI_MTMR_MAX_NUM 8#define SFI_MRTC_MAX 8 +extern struct console early_mrst_console; +extern void mrst_early_printk (const char *fmt, ...);#endif /* _ASM_X86_MRST_H */
arch/x86/kernel/Makefile +1 -0
@@ -84,6 +84,7 @@ obj-$(CONFIG_DOUBLEFAULT) += doublefault_32.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_VM86) += vm86_32.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_X86_MRST_EARLY_PRINTK) += mrst_earlyprintk.o obj-$(CONFIG_HPET_TIMER) += hpet.o obj-$(CONFIG_APB_TIMER) += apb_timer.o
arch/x86/kernel/early_printk.c +5 -0
@@ -14,6 +14,7 @@#include <xen/hvc-console.h> #include <asm/pci-direct.h> #include <asm/fixmap.h> +#include <asm/mrst.h> #include <asm/pgtable.h> #include <linux/usb/ehci_def.h>
@@ -239,6 +240,10 @@ static int __init setup_early_printk(char *buf)if (!strncmp (buf,"xen" ,3 ))early_console_register (&xenboot_console, keep);#endif +#ifdef CONFIG_X86_MRST_EARLY_PRINTK +if (!strncmp (buf,"mrst" ,4 )) +early_console_register (&early_mrst_console, keep); +#endif buf++; }return 0 ;
arch/x86/kernel/mrst_earlyprintk.c new file +283 -0
283 lines not on this page · raw message