Bluetooth: Add socket option definitions for AMP
Subsystems (3)
PATCH v2 1/1 Bluetooth: Add socket option definitions for AMP
This adds a new BT_AMP socket option to control the use of AMP channels. It is for use with the SOL_BLUETOOTH option level on L2CAP sockets.
Available option values are defined as:
BT_AMP_REQUIRE_BR_EDR
* Default
* AMP controllers cannot be used
* Channel move requests from the remote device are denied
* If the L2CAP channel is currently using AMP, move the channel to BR/EDR
BT_AMP_PREFER_AMP
* Allow use of AMP controllers
* If the L2CAP channel is currently on BR/EDR and AMP controller resources are available, initiate a channel move to AMP
* Channel move requests from the remote device are allowed
* If the L2CAP socket has not been connected yet, try to create and configure the channel directly on an AMP controller rather than BR/EDR
BT_AMP_PREFER_BR_EDR
* Allow use of AMP controllers
* If the L2CAP channel is currently on AMP, move it to BR/EDR
* Channel move requests from the remote device are allowed
--- include/net/bluetooth/bluetooth.h | 25 +++++++++++++++++++++++++ 1 files changed, 25 insertions(+), 0 deletions(-)
include/net/bluetooth/bluetooth.h +25 -0
@@ -64,6 +64,31 @@ struct bt_security {#define BT_DEFER_SETUP 7 + +#define BT_AMP_POLICY 8 +/* Require BR/EDR (default policy) +* AMP controllers cannot be used +* Channel move requests from the remote device are denied +* If the L2CAP channel is currently using AMP, move the channel to BR/EDR +*/ +#define BT_AMP_POLICY_REQUIRE_BR_EDR 0 +/* Prefer AMP +* Allow use of AMP controllers +* If the L2CAP channel is currently on BR/EDR and AMP controller +* resources are available, initiate a channel move to AMP +* Channel move requests from the remote device are allowed +* If the L2CAP socket has not been connected yet, try to create +* and configure the channel directly on an AMP controller rather +* than BR/EDR +*/ +#define BT_AMP_POLICY_PREFER_AMP 1 +/* Prefer BR/EDR +* Allow use of AMP controllers +* If the L2CAP channel is currently on AMP, move it to BR/EDR +* Channel move requests from the remote device are allowed +*/ +#define BT_AMP_POLICY_PREFER_BR_EDR 2 + #define BT_INFO(fmt, arg...) printk(KERN_INFO "Bluetooth: " fmt "\n" , ## arg) #define BT_ERR(fmt, arg...) printk(KERN_ERR "%s: " fmt "\n" , __func__ , ## arg) #define BT_DBG(fmt, arg...) pr_debug("%s: " fmt "\n" , __func__ , ## arg)
Signature · 1 line
1.7.1
Hi Mat,
Quoted 36 lines · Mat Martineau
This adds a new
BT_AMPsocket option to control the use of AMP channels. It is for use with theSOL_BLUETOOTHoption level on L2CAP sockets.Available option values are defined as:
BT_AMP_REQUIRE_BR_EDR
* Default
* AMP controllers cannot be used
* Channel move requests from the remote device are denied
* If the L2CAP channel is currently using AMP, move the channel to BR/EDR
BT_AMP_PREFER_AMP
* Allow use of AMP controllers
* If the L2CAP channel is currently on BR/EDR and AMP controller resources are available, initiate a channel move to AMP
* Channel move requests from the remote device are allowed
* If the L2CAP socket has not been connected yet, try to create and configure the channel directly on an AMP controller rather than BR/EDR
BT_AMP_PREFER_BR_EDR
* Allow use of AMP controllers
* If the L2CAP channel is currently on AMP, move it to BR/EDR
* Channel move requests from the remote device are allowedSigned-off-by Mat Martineau <[email protected]>--- include/net/bluetooth/bluetooth.h | 25 +++++++++++++++++++++++++ 1 files changed, 25 insertions(+), 0 deletions(-)include/net/bluetooth/bluetooth.h +0
-0
include/net/bluetooth/bluetooth.h struct bt_security { · line 68
Quoted 5 lines
include/net/bluetooth/bluetooth.h +2
-0@@ -64,6 +64,31 @@ struct bt_security {#define BT_DEFER_SETUP 7 + +#define BT_AMP_POLICY 8
Please add a empty line here.
include/net/bluetooth/bluetooth.h struct bt_security { · line 74
Quoted 6 lines
include/net/bluetooth/bluetooth.h +6
-0+/* Require BR/EDR (default policy) +* AMP controllers cannot be used +* Channel move requests from the remote device are denied +* If the L2CAP channel is currently using AMP, move the channel to BR/EDR +*/ +#define BT_AMP_POLICY_REQUIRE_BR_EDR 0
And here.
include/net/bluetooth/bluetooth.h struct bt_security { · line 84
Quoted 10 lines
include/net/bluetooth/bluetooth.h +10
-0+/* Prefer AMP +* Allow use of AMP controllers +* If the L2CAP channel is currently on BR/EDR and AMP controller +* resources are available, initiate a channel move to AMP +* Channel move requests from the remote device are allowed +* If the L2CAP socket has not been connected yet, try to create +* and configure the channel directly on an AMP controller rather +* than BR/EDR +*/ +#define BT_AMP_POLICY_PREFER_AMP 1
And here.
Quoted 17 lines
include/net/bluetooth/bluetooth.h +7
-0+/* Prefer BR/EDR +* Allow use of AMP controllers +* If the L2CAP channel is currently on AMP, move it to BR/EDR +* Channel move requests from the remote device are allowed +*/ +#define BT_AMP_POLICY_PREFER_BR_EDR 2 + #define BT_INFO(fmt, arg...) printk(KERN_INFO "Bluetooth: " fmt "\n" , ## arg) #define BT_ERR(fmt, arg...) printk(KERN_ERR "%s: " fmt "\n" , __func__ , ## arg) #define BT_DBG(fmt, arg...) pr_debug("%s: " fmt "\n" , __func__ , ## arg)Signature · 6 lines
1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-bluetooth" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 2 lines
Gustavo F. Padovan roFUSION embedded systems - http://profusion.mobi