new AF9015 devices
Moikka Mauro!
This patch series adds support for TerraTec Cinergy T Stick Dual RC and TerraTec Cinergy T Stick RC. Also MxL5007T devices with ref. design IDs should be working. Cinergy T Stick remote is most likely not working since it seems to use different remote as Cinergy T Dual... Stefan could you test and ensure T Stick is working?
and thanks to TerraTec!
t. Antti
The following changes since commit c9889354c6d36d6278ed851c74ace02d72efdd59:
V4L/DVB: rc-core: increase repeat time (2010-09-08 13:04:40 -0300)
are available in the git repository at:
git://linuxtv.org/anttip/media_tree.git af9015
Antti Palosaari (6):
af9015: simple comment update
af9015: fix bug introduced by commit
490ade7e3f4474f626a8f5d778ead4e599b94fbcas
af9013: add support for MaxLinear MxL5007T tuner
af9015: add support for TerraTec Cinergy T Stick Dual RC
af9015: add remote support for TerraTec Cinergy T Stick Dual RC
af9015: map TerraTec Cinergy T Stick Dual RC remote to device ID
drivers/media/dvb/dvb-usb/Kconfig | 1 + drivers/media/dvb/dvb-usb/af9015.c | 50 +++++++++++++---------- drivers/media/dvb/dvb-usb/af9015.h | 63 +++++++++++++++++++++++++++++ drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 + drivers/media/dvb/frontends/af9013.c | 1 + drivers/media/dvb/frontends/af9013.h | 1 + drivers/media/dvb/frontends/af9013_priv.h | 5 +- 7 files changed, 99 insertions(+), 23 deletions(-)
Signature · 1 line
http://palosaari.fi/
Hi
Quoted 8 lines · Antti Palosaari
Moikka Mauro!
This patch series adds support for TerraTec Cinergy T Stick Dual RC and TerraTec Cinergy T Stick RC. Also MxL5007T devices with ref. design IDs should be working. Cinergy T Stick remote is most likely not working since it seems to use different remote as Cinergy T Dual... Stefan could you test and ensure T Stick is working?and thanks to TerraTec!
[...]
DVB-T is working fine with my TerraTec "Cinergy T RC MKII" 0ccd:0097 (branch af9015), as you expected the remote control doesn't react to the generic USB_VID_TERRATEC matching and the given IR codes. No ill effects though, the shipped remote just appears to be "dead" with those settings. So these patches are fine and aren't a regression for my device.
I actually tried my luck with your suggestions for debugging the IR support, but as the remote continued to act in a weird (bouncing keycodes and no stable mappings at all), I didn't get very far. Except that the EEPROM hash is 0x11f6768f.
A brutal first attempt to replace the predefined ir_codes_terratec/ af9015_ir_terratec with my current assumptions results in very similar, erratic behaviour:
static struct ir_scancode ir_codes_terratec[] = {
{ 0x0057, KEY_1 },
{ 0x0020, KEY_2 },
{ 0x0026, KEY_3 },
{ 0x0056, KEY_4 },
{ 0x0021, KEY_5 },
{ 0x0027, KEY_6 },
{ 0x004b, KEY_7 },
{ 0x0022, KEY_8 },
{ 0x0009, KEY_9 },
{ 0x0023, KEY_0 },
{ 0x0024, KEY_CHANNELUP },
{ 0x0025, KEY_CHANNELDOWN },
{ 0x004e, KEY_ZOOM },
{ 0x0010, KEY_MUTE },
{ 0x001f, KEY_VOLUMEDOWN },
{ 0x001e, KEY_VOLUMEUP },
{ 0x001c, KEY_GOTO }, /* jump */
{ 0x043d, KEY_POWER },
};static u8 af9015_ir_terratec[] = {
0x80, 0x7f, 0x12, 0xed, 0x3d, 0x04, 0x00, /* power */
0x80, 0x7f, 0x01, 0xfe, 0x10, 0x00, 0x00, /* mute */
0x80, 0x7f, 0x1a, 0xe5, 0x57, 0x00, 0x00, /* 1 */
0x80, 0x7f, 0x02, 0xfd, 0x56, 0x00, 0x00, /* 4 */
0x80, 0x7f, 0x1e, 0xe1, 0x4b, 0x00, 0x00, /* 7 */
0x80, 0x7f, 0x03, 0xfc, 0x4e, 0x00, 0x00, /* zoom */
0x80, 0x7f, 0x04, 0xfb, 0x1e, 0x00, 0x00, /* volume up */
0x80, 0x7f, 0x05, 0xfa, 0x1f, 0x00, 0x00, /* volume down */
0x80, 0x7f, 0x06, 0xf9, 0x20, 0x00, 0x00, /* 2 */
0x80, 0x7f, 0x07, 0xf8, 0x21, 0x00, 0x00, /* 5 */
0x80, 0x7f, 0x08, 0xf7, 0x22, 0x00, 0x00, /* 8 */
0x80, 0x7f, 0x09, 0xf6, 0x23, 0x00, 0x00, /* 0 */
0x80, 0x7f, 0x0a, 0xf5, 0x24, 0x00, 0x00, /* channel up */
0x80, 0x7f, 0x1b, 0xe4, 0x25, 0x00, 0x00, /* channel down */
0x80, 0x7f, 0x1f, 0xe0, 0x26, 0x00, 0x00, /* 3 */
0x80, 0x7f, 0x0d, 0xf2, 0x27, 0x00, 0x00, /* 6 */
0x80, 0x7f, 0x0c, 0xf3, 0x09, 0x00, 0x00, /* 9 */
0x80, 0x7f, 0x0e, 0xf1, 0x1c, 0x00, 0x00, /* jump */
};The numbers seem to match, the rest was mostly "guessed" from the apparent strategy (top-->down. left-->right), but pressing '1' still results in "111111" (repeating until terminated by ctrl-c), pressing '4' in "54444445" (until terminated).
Regards
Stefan Lippers-Hollmann
Hi
Quoted 8 lines · Antti Palosaari
Moikka Mauro!
This patch series adds support for TerraTec Cinergy T Stick Dual RC and TerraTec Cinergy T Stick RC. Also MxL5007T devices with ref. design IDs should be working. Cinergy T Stick remote is most likely not working since it seems to use different remote as Cinergy T Dual... Stefan could you test and ensure T Stick is working?and thanks to TerraTec!
[...]
Another test and some further debugging of the IR core usedby the af9015 branch of this git tree led me to partial success. DVB-T functionality continues to be fine and I've now found the proper values for this remote, however once a key gets pressed, it is never released (unless another key gets pressed which is then struck or unless I ctrl-c it (only works on terminals). Likewise I'm not sure yet how to distinguish between the "Cinergy T Dual" and my "Cinergy T RC MKII":
lsusb: 0ccd:0097 TerraTec Electronic GmbH Cinergy T RC MKII
EEPROM hash: 0x11f6768f
static struct ir_scancode ir_codes_terratec[] = {
{ 0x001e, KEY_1 },
{ 0x001f, KEY_2 },
{ 0x0020, KEY_3 },
{ 0x0021, KEY_4 },
{ 0x0022, KEY_5 },
{ 0x0023, KEY_6 },
{ 0x0024, KEY_7 },
{ 0x0025, KEY_8 },
{ 0x0026, KEY_9 },
{ 0x0027, KEY_0 },
{ 0x004b, KEY_CHANNELUP },
{ 0x004e, KEY_CHANNELDOWN },
{ 0x0009, KEY_ZOOM },
{ 0x0010, KEY_MUTE },
{ 0x0056, KEY_VOLUMEDOWN },
{ 0x0057, KEY_VOLUMEUP },
{ 0x001c, KEY_GOTO }, /* jump */
{ 0x043d, KEY_POWER },
};static u8 af9015_ir_terratec[] = {
0x80, 0x7f, 0x12, 0xed, 0x3d, 0x04, 0x00, /* power */
0x80, 0x7f, 0x01, 0xfe, 0x10, 0x00, 0x00, /* mute */
0x80, 0x7f, 0x1a, 0xe5, 0x57, 0x00, 0x00, /* vol+ */
0x80, 0x7f, 0x02, 0xfd, 0x56, 0x00, 0x00, /* vol- */
0x80, 0x7f, 0x1e, 0xe1, 0x4b, 0x00, 0x00, /* ch+ */
0x80, 0x7f, 0x03, 0xfc, 0x4e, 0x00, 0x00, /* ch- */
0x80, 0x7f, 0x04, 0xfb, 0x1e, 0x00, 0x00, /* 1 */
0x80, 0x7f, 0x05, 0xfa, 0x1f, 0x00, 0x00, /* 2 */
0x80, 0x7f, 0x06, 0xf9, 0x20, 0x00, 0x00, /* 3 */
0x80, 0x7f, 0x07, 0xf8, 0x21, 0x00, 0x00, /* 4 */
0x80, 0x7f, 0x08, 0xf7, 0x22, 0x00, 0x00, /* 5 */
0x80, 0x7f, 0x09, 0xf6, 0x23, 0x00, 0x00, /* 6 */
0x80, 0x7f, 0x0a, 0xf5, 0x24, 0x00, 0x00, /* 7 */
0x80, 0x7f, 0x1b, 0xe4, 0x25, 0x00, 0x00, /* 8 */
0x80, 0x7f, 0x1f, 0xe0, 0x26, 0x00, 0x00, /* 9 */
0x80, 0x7f, 0x0d, 0xf2, 0x27, 0x00, 0x00, /* 0 */
0x80, 0x7f, 0x0c, 0xf3, 0x09, 0x00, 0x00, /* zoom */
0x80, 0x7f, 0x0e, 0xf1, 0x1c, 0x00, 0x00, /* jump */
};Likewise lirc's irrecord comes up with this lircd.conf:
begin remote
name lircd.conf.Cinergy-T-RC-MKII
bits 56
eps 30
aeps 100
one 0 0 zero 0 0 pre_data_bits 8
pre_data 0x0
gap 452913
toggle_bit_mask 0x0
begin codes
KEY_1 0x01000200000001 0x00000000000000
KEY_2 0x01000300000001 0x00000000000000
KEY_3 0x01000400000001 0x00000000000000
KEY_4 0x01000500000001 0x00000000000000
KEY_5 0x01000600000001 0x00000000000000
KEY_6 0x01000700000001 0x00000000000000
KEY_7 0x01000800000001 0x00000000000000
KEY_8 0x01000900000001 0x00000000000000
KEY_9 0x01000A00000001 0x00000000000000
KEY_0 0x01000B00000001 0x00000000000000
KEY_CHANNELUP 0x01019200000001 0x00000000000000
KEY_CHANNELDOWN 0x01019300000001 0x00000000000000
KEY_ZOOM 0x01017400000001 0x00000000000000
KEY_MUTE 0x01007100000001 0x00000000000000
KEY_VOLUMEDOWN 0x01007200000001 0x00000000000000
KEY_VOLUMEUP 0x01007300000001 0x00000000000000
KEY_GOTO 0x01016200000001 0x00000000000000
KEY_POWER 0x01007400000001 0x00000000000000
end codesend remote
Given that keys, once pressed, remain to be stuck, using both lirc's dev/input and without any dæmon trying to catch keypresses, I have not reached a functional configuration.
Regards
Stefan Lippers-Hollmann
Quoted 9 lines · Stefan Lippers-Hollmann
Another test and some further debugging of the IR core usedby the af9015 branch of this git tree led me to partial success. DVB-T functionality continues to be fine and I've now found the proper values for this remote, however once a key gets pressed, it is never released (unless another key gets pressed which is then struck or unless I ctrl-c it (only works on terminals). Likewise I'm not sure yet how to distinguish between the "Cinergy T Dual" and my "Cinergy T RC MKII":
Quoted 3 lines
Given that keys, once pressed, remain to be stuck, using both lirc's dev/input and without any dæmon trying to catch keypresses, I have not reached a functional configuration.
That`s known issue. Chip configures USB HID polling interval wrongly and due to that HID starts repeating usually. There is USB-ID mapped quirks in HID driver to avoid that, but only for few ADF9015 IDs...
I know how to fix that totally. I have been waiting new IR core merge before switch remote from broken HID + polling to memory read based one. But maybe I can do it just now and convert it later to IR core.
Antti
Signature · 1 line
http://palosaari.fi/
Hi
Quoted 10 lines · Antti Palosaari
sure yet how to distinguish between the
Quoted 6 lines
"Cinergy T Dual" and my "Cinergy T RC MKII":
Given that keys, once pressed, remain to be stuck, using both lirc's dev/input and without any dæmon trying to catch keypresses, I have not reached a functional configuration.
That`s known issue. Chip configures USB HID polling interval wrongly and due to that HID starts repeating usually. There is USB-ID mapped quir
Yes, now I see it. A quickly hacked test seems to improve the stuck key events a lot (some keys still have a tendency to get stuck, but in general it works):
drivers/hid/usbhid/hid-quirks.c +1 -0
@@ -45,6 +45,7 @@ static const struct hid_blacklist { { USB_VENDOR_ID_TOPMAX, USB_DEVICE_ID_TOPMAX_COBRAPAD, HID_QUIRK_BADPAD }, { USB_VENDOR_ID_AFATECH, USB_DEVICE_ID_AFATECH_AF9016, HID_QUIRK_FULLSPEED_INTERVAL }, + { 0x0ccd, 0x0097, HID_QUIRK_FULLSPEED_INTERVAL }, { USB_VENDOR_ID_ETURBOTOUCH, USB_DEVICE_ID_ETURBOTOUCH, HID_QUIRK_MULTI_INPUT }, { USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS },
Regards
Stefan Lippers-Hollmann
Em 09-09-2010 18:12, Antti Palosaari escreveu:
Quoted 10 lines
Moikka Mauro!
This patch series adds support for TerraTec Cinergy T Stick Dual RC and TerraTec Cinergy T Stick RC. Also MxL5007T devices with ref. design IDs should be working. Cinergy T Stick remote is most likely not working since it seems to use different remote as Cinergy T Dual... Stefan could you test and ensure T Stick is working?and thanks to TerraTec!
t. Antti
The following changes since commit
c9889354c6d36d6278ed851c74ace02d72efdd59:
Quoted 7 lines
V4L/DVB: rc-core: increase repeat time (2010-09-08 13:04:40 -0300)
are available in the git repository at:
git://linuxtv.org/anttip/media_tree.gitaf9015Antti Palosaari (6):
af9015: simple comment update
Hmm... dvb-usb.h defines it as:
struct dvb_usb_device_description devices[12];
It took me some time to find the current limit ;)
IMO, instead of just comment it as:
.num_device_descs = 9, /* check max from dvb-usb.h */
The better would be to add a definition at dvb-usb.h header for the max limit, and properly pointing it on your drivers, like:
on dvb-usb.h:
#define MAX_DEVICES_PER_DEV_PROPS 12 ... struct dvb_usb_device_description devices[MAX_DEVICES_PER_DEV_PROPS];
on af9015 (and others):
.num_device_descs = 9, /* max is MAX_DEVICES_PER_DEV_PROPS as defined on dvb-usb.h */
I'll apply this patch to avoid breaking your series, but please provide me a fix.
Quoted 6 lines
af9015: fix bug introduced by commit 490ade7e3f4474f626a8f5d778ead4e599b94fbcas
af9013: add support for MaxLinear MxL5007T tuner
af9015: add support for TerraTec Cinergy T Stick Dual RC
af9015: add remote support for TerraTec Cinergy T Stick Dual RC
af9015: map TerraTec Cinergy T Stick Dual RC remote to device ID
Quoted 10 lines
drivers/media/dvb/dvb-usb/Kconfig | 1 + drivers/media/dvb/dvb-usb/af9015.c | 50 +++++++++++++---------- drivers/media/dvb/dvb-usb/af9015.h | 63 +++++++++++++++++++++++++++++ drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 + drivers/media/dvb/frontends/af9013.c | 1 + drivers/media/dvb/frontends/af9013.h | 1 + drivers/media/dvb/frontends/af9013_priv.h | 5 +- 7 files changed, 99 insertions(+), 23 deletions(-)
Cheers,
Mauro