Skip to contentSkip to conversation

transmission better choice over ctorrent according to users voices

Buildroot New Marcus Osdoba 3 participants 7 messages Sep 9, 2010 – Sep 11, 2010

lore
Share & tools
lore
#0 lore raw

a lot of people confirmed that ctorrent is segfaulting to often and resource intensiv, they preferred transmission over ctorrent

transmission has a daemon mode which is quite excellent for headless embedded devices the webinterface is a real eyecandy

#1 lore raw

PATCH 1/1 introducing transmission bittorrent client

introduces version 2.04 of transmission,
it has an excellent web interface which runs on port 9091 per default, the patch provides two options, enable cli and/or remote component

the work is based on the patch from Kelvin Cheung

---
 fs/skeleton/var/transmission         |    1 +
 package/Config.in                    |    1 +
 package/transmission/Config.in       |   23 +++++++++
 package/transmission/S92transmission |   88 ++++++++++++++++++++++++++++++++++
 package/transmission/transmission.mk |   32 ++++++++++++
 5 files changed, 145 insertions(+), 0 deletions(-)
 create mode 120000 fs/skeleton/var/transmission
 create mode 100755 package/transmission/Config.in
 create mode 100755 package/transmission/S92transmission
 create mode 100644 package/transmission/transmission.mk
fs/skeleton/var/transmission new file +1 -0
new file mode 120000
index 0000000..1431b0e
@@ -0,0 +1 @@
+../tmp
\ No newline at end of file
package/Config.in +1 -0
index d60d8ef..17386ad 100644
@@ -427,6 +427,7 @@ source "package/thttpd/Config.in"
 source "package/tinyhttpd/Config.in"
 endif
 source "package/tn5250/Config.in"
+source "package/transmission/Config.in"
 source "package/ttcp/Config.in"
 source "package/udpcast/Config.in"
 source "package/vpnc/Config.in"
package/transmission/Config.in new file +23 -0
new file mode 100755
index 0000000..49f618f
@@ -0,0 +1,23 @@
+config BR2_PACKAGE_TRANSMISSION
+	bool "transmission"
+	select BR2_PACKAGE_ZLIB
+	select BR2_PACKAGE_OPENSSL
+	select BR2_PACKAGE_LIBCURL
+	select BR2_PACKAGE_LIBEVENT
+	default n
+	help
+	  transmission - Transmission BitTorrent Client
+
+config BR2_PACKAGE_TRANSMISSION_CLI
+	bool "transmissioncli"
+	depends on BR2_PACKAGE_TRANSMISSION
+	default no
+	help
+	  Install transmission command line interface.
+
+config BR2_PACKAGE_TRANSMISSION_REMOTE
+	bool "transmission-remote"
+	depends on BR2_PACKAGE_TRANSMISSION
+	default yes
+	help
+	  Install transmission remote management tool.
package/transmission/S92transmission new file +88 -0

88 lines not on this page · raw message

package/transmission/transmission.mk new file +32 -0
new file mode 100644
index 0000000..71d4b43
@@ -0,0 +1,32 @@
+#############################################################
+#
+# transmission
+#
+#############################################################
+#
+#
+TRANSMISSION_VERSION=2.04
+TRANSMISSION_SOURCE=transmission-$(TRANSMISSION_VERSION).tar.bz2
+TRANSMISSION_SITE=http://mirrors.m0k.org/transmission/files/
+TRANSMISSION_LIBTOOL_PATCH=NO
+TRANSMISSION_DEPENDENCIES= host-pkg-config host-intltool zlib openssl libcurl libevent
+
+TRANSMISSION_CONF_OPT = --prefix=/usr \
+			--localstatedir=/var/transmission \
+			--disable-gtk \
+			--disable-libnotify \
+			--enable-daemon \
+			--with-zlib=$(STAGING_DIR) \
+			$(DISABLE_NLS) \
+			$(DISABLE_LARGEFILE)
+
+ifneq ($(BR2_PACKAGE_TRANSMISSION_CLI),y)
+TRANSMISSION_CONF_OPT += --disable-cli
+endif
+
+ifneq ($(BR2_PACKAGE_TRANSMISSION_REMOTE),y)
+TRANSMISSION_CONF_OPT += --disable-remote
+endif
+
+
+$(eval $(call AUTOTARGETS,package,transmission))
Signature · 1 line
1.7.1
#2 lore raw

PATCH 1/1 introducing transmission bittorrent client

To be honest I post patch for transmission 4 months ago and also splashy package month ago
and the're still not in the release. Why?

Quoted 203 lines · Marcus Osdoba

introduces version 2.04 of transmission,
it has an excellent web interface which runs on port 9091 per default, the patch provides two options, enable cli and/or remote component

the work is based on the patch from Kelvin Cheung

---

?fs/skeleton/var/transmission ? ? ? ? | ? ?1 +
?package/Config.in ? ? ? ? ? ? ? ? ? ?| ? ?1 +
?package/transmission/Config.in ? ? ? | ? 23 +++++++++
?package/transmission/S92transmission | ? 88 ++++++++++++++++++++++++++++++++++
?package/transmission/transmission.mk | ? 32 ++++++++++++

?5 files changed, 145 insertions(+), 0 deletions(-) ?create mode 120000 fs/skeleton/var/transmission ?create mode 100755 package/transmission/Config.in ?create mode 100755 package/transmission/S92transmission ?create mode 100644 package/transmission/transmission.mk

fs/skeleton/var/transmission new file +1 -0
new file mode 120000
index 0000000..1431b0e
@@ -0,0 +1 @@
+../tmp
\ No newline at end of file
package/Config.in +0 -0
index d60d8ef..17386ad 100644
@@ -427,6 +427,7 @@ source "package/thttpd/Config.in"

?source "package/tinyhttpd/Config.in"
?endif
?source "package/tn5250/Config.in"
+source "package/transmission/Config.in"
?source "package/ttcp/Config.in"
?source "package/udpcast/Config.in"
?source "package/vpnc/Config.in"

package/transmission/Config.in new file +23 -0
new file mode 100755
index 0000000..49f618f
@@ -0,0 +1,23 @@
+config BR2_PACKAGE_TRANSMISSION
+ ? ? ? bool "transmission"
+ ? ? ? select BR2_PACKAGE_ZLIB
+ ? ? ? select BR2_PACKAGE_OPENSSL
+ ? ? ? select BR2_PACKAGE_LIBCURL
+ ? ? ? select BR2_PACKAGE_LIBEVENT
+ ? ? ? default n
+ ? ? ? help
+ ? ? ? ? transmission - Transmission BitTorrent Client
+
+config BR2_PACKAGE_TRANSMISSION_CLI
+ ? ? ? bool "transmissioncli"
+ ? ? ? depends on BR2_PACKAGE_TRANSMISSION
+ ? ? ? default no
+ ? ? ? help
+ ? ? ? ? Install transmission command line interface.
+
+config BR2_PACKAGE_TRANSMISSION_REMOTE
+ ? ? ? bool "transmission-remote"
+ ? ? ? depends on BR2_PACKAGE_TRANSMISSION
+ ? ? ? default yes
+ ? ? ? help
+ ? ? ? ? Install transmission remote management tool.
package/transmission/S92transmission new file +88 -0
new file mode 100755
index 0000000..9c15aae
@@ -0,0 +1,88 @@
+#!/bin/sh
+if [ ! -z "$2" ]; then
+ ? ? ? TRANSMISSION_ARGS="$2"
+else
+ ? ? ? TRANSMISSION_ARGS=""
+fi
+
+if [ ! -z "$3" ]; then
+ ? ? ? NET_INTERFACE="$3"
+else
+ ? ? ? NET_INTERFACE=""
+fi
+
+DESC="bittorrent client"
+NAME=transmission-daemon
+DAEMON=$(which $NAME)
+SCRIPTNAME=/etc/init.d/$0
+
+[ -x "$DAEMON" ] || exit 0
+
+do_start()
+{
+ ? ? ? if [ ! -z "$NET_INTERFACE" ]; then
+ ? ? ? ? ? ? ? # poll network interface
+ ? ? ? ? ? ? ? IFCONFIG_OUTPUT=`ifconfig $NET_INTERFACE`
+ ? ? ? ? ? ? ? IP_ADDR=`expr match "$IFCONFIG_OUTPUT" '.*inet addr:\([0-9]*\.[0-9]*\.[0-9]*\.[0-9]*\).*'`
+ ? ? ? ? ? ? ? while [ -z "$IP_ADDR" ]
+ ? ? ? ? ? ? ? do
+ ? ? ? ? ? ? ? ? ? ? ? sleep 5
+ ? ? ? ? ? ? ? ? ? ? ? IFCONFIG_OUTPUT=`ifconfig $NET_INTERFACE`
+ ? ? ? ? ? ? ? ? ? ? ? IP_ADDR=`expr match "$IFCONFIG_OUTPUT" '.*inet addr:\([0-9]*\.[0-9]*\.[0-9]*\.[0-9]*\).*'`
+ ? ? ? ? ? ? ? done
+ ? ? ? fi
+ ? ? ? if [ -z "$TRANSMISSION_ARGS" ]; then
+ ? ? ? ? ? ? ? start-stop-daemon -S -b -x ${DAEMON}
+ ? ? ? else
+ ? ? ? ? ? ? ? start-stop-daemon -S -b -x ${DAEMON} -- ${TRANSMISSION_ARGS}
+ ? ? ? fi
+ ? ? ? return $?
+}
+
+do_stop()
+{
+ ? ? ? start-stop-daemon -K -b -x ${DAEMON}
+ ? ? ? return $?
+}
+
+case "$1" in
+ ? ? ? start)
+ ? ? ? ? ? ? ? echo "Starting $DESC" "$NAME..."
+ ? ? ? ? ? ? ? do_start
+ ? ? ? ? ? ? ? case "$?" in
+ ? ? ? ? ? ? ? ? ? ? ? 0) echo " ? Start $DESC $NAME: SUCCESS" ;;
+ ? ? ? ? ? ? ? ? ? ? ? *)
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? echo " ? Start $DESC $NAME: FAILED"
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? exit 3
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ;;
+ ? ? ? ? ? ? ? esac
+ ? ? ? ? ? ? ? ;;
+ ? ? ? stop)
+ ? ? ? ? ? ? ? echo "Stopping $DESC $NAME..."
+ ? ? ? ? ? ? ? do_stop
+ ? ? ? ? ? ? ? case "$?" in
+ ? ? ? ? ? ? ? ? ? ? ? 0) echo " ? Stop $DESC $NAME: SUCCESS" ;;
+ ? ? ? ? ? ? ? ? ? ? ? *)
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? echo " ? Stop $DESC $NAME: FAILED"
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? exit 3
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ;;
+ ? ? ? ? ? ? ? esac
+ ? ? ? ? ? ? ? ;;
+ ? ? ? restart|force-reload)
+ ? ? ? ? ? ? ? echo "Restarting $DESC $NAME..."
+ ? ? ? ? ? ? ? do_stop
+ ? ? ? ? ? ? ? sleep 2
+ ? ? ? ? ? ? ? do_start
+ ? ? ? ? ? ? ? case "$?" in
+ ? ? ? ? ? ? ? ? ? ? ? 0) echo " ? Restart $DESC $NAME: SUCCESS" ;;
+ ? ? ? ? ? ? ? ? ? ? ? *)
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? echo " ? Restart $DESC $NAME: FAILED: couldn't start $NAME"
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? exit 3
+ ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ;;
+ ? ? ? ? ? ? ? esac
+ ? ? ? ? ? ? ? ;;
+ ? ? ? *)
+ ? ? ? ? ? ? ? echo "Usage: $SCRIPTNAME {start|stop|restart|force-reload}" >&2
+ ? ? ? ? ? ? ? exit 3
+ ? ? ? ? ? ? ? ;;
+esac
package/transmission/transmission.mk new file +32 -1
new file mode 100644
index 0000000..71d4b43
@@ -0,0 +1,32 @@
+#############################################################
+#
+# transmission
+#
+#############################################################
+#
+#
+TRANSMISSION_VERSION=2.04
+TRANSMISSION_SOURCE=transmission-$(TRANSMISSION_VERSION).tar.bz2
+TRANSMISSION_SITE=http://mirrors.m0k.org/transmission/files/
+TRANSMISSION_LIBTOOL_PATCH=NO
+TRANSMISSION_DEPENDENCIES= host-pkg-config host-intltool zlib openssl libcurl libevent
+
+TRANSMISSION_CONF_OPT = --prefix=/usr \
+ ? ? ? ? ? ? ? ? ? ? ? --localstatedir=/var/transmission \
+ ? ? ? ? ? ? ? ? ? ? ? --disable-gtk \
+ ? ? ? ? ? ? ? ? ? ? ? --disable-libnotify \
+ ? ? ? ? ? ? ? ? ? ? ? --enable-daemon \
+ ? ? ? ? ? ? ? ? ? ? ? --with-zlib=$(STAGING_DIR) \
+ ? ? ? ? ? ? ? ? ? ? ? $(DISABLE_NLS) \
+ ? ? ? ? ? ? ? ? ? ? ? $(DISABLE_LARGEFILE)
+
+ifneq ($(BR2_PACKAGE_TRANSMISSION_CLI),y)
+TRANSMISSION_CONF_OPT += --disable-cli
+endif
+
+ifneq ($(BR2_PACKAGE_TRANSMISSION_REMOTE),y)
+TRANSMISSION_CONF_OPT += --disable-remote
+endif
+
+
+$(eval $(call AUTOTARGETS,package,transmission))
--

1.7.1

Quoted 5 lines

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

Marek

Signature · 10 lines
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
icq: 290551086
web: http://open-nandra.com
#3 lore raw

PATCH 1/1 introducing transmission bittorrent client

Hello Belisko,

Quoted 3 lines · On Fri, 10 Sep 2010 07:07:36 +0200 Belisko Marek <[email protected]>…

To be honest I post patch for transmission 4 months ago and also splashy package month ago
and the're still not in the release. Why?

We also have an enhancement bug since quite some time about
transmission: https://bugs.busybox.net/show_bug.cgi?id=743. Sorry about this delay/lack of reaction on those topics.

Belisko, Marcus, could you take the of those three proposals, and submit a new version of the patch ? I promess to take care of it and make sure it gets merged.

Thanks,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#4 lore raw

PATCH 1/1 introducing transmission bittorrent client

Hi,

Quoted 5 lines · Thomas Petazzoni

Hello Belisko,

On Fri, 10 Sep 2010 07:07:36 +0200
Belisko Marek <[email protected]> wrote:

Quoted 7 lines
Quoted 3 lines

To be honest I post patch for transmission 4 months ago and also splashy package month ago
and the're still not in the release. Why?

We also have an enhancement bug since quite some time about
transmission: https://bugs.busybox.net/show_bug.cgi?id=743. Sorry about this delay/lack of reaction on those topics.

No problem about that but you have then more work for reading same (similar) patches.

Quoted 4 lines

Belisko, Marcus, could you take the of those three proposals, and submit a new version of the patch ? I promess to take care of it and make sure it gets merged.

Marcus could you please make update version and repost?

Quoted 14 lines

Thanks,

Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot

Thanks,

Marek

Signature · 10 lines
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer

Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
icq: 290551086
web: http://open-nandra.com
#5 lore raw

PATCH 1/1 introducing transmission bittorrent client

Am 10.09.2010 10:15, schrieb Belisko Marek:

Quoted 8 lines

Belisko, Marcus, could you take the of those three proposals, and submit a new version of the patch ? I promess to take care of it and make sure it gets merged.
Marcus could you please make update version and repost? Thanks,

Marek

Hi,
I included Thomas' suggestions and the actual version I found in bugzilla. The test-build before sending is currently running....

Regards,
Marcus

#6 lore raw

PATCH 1/1 introducing transmission bittorrent client

In reply to Marcus Osdoba

Hello Marcus,

Quoted 1 line · On Thu, 9 Sep 2010 22:28:52 +0200 Marcus Osdoba…
 fs/skeleton/var/transmission         |    1 +

I'd prefer not to add this to the generic skeleton, and instead have the Transmission installation process create this symlink.

package/transmission/Config.in line 7

Quoted 10 lines
package/transmission/Config.in new file +7 -0
@@ -0,0 +1,23 @@
+config BR2_PACKAGE_TRANSMISSION
+	bool "transmission"
+	select BR2_PACKAGE_ZLIB
+	select BR2_PACKAGE_OPENSSL
+	select BR2_PACKAGE_LIBCURL
+	select BR2_PACKAGE_LIBEVENT
+	default n

default n is not needed, as this is the default.

package/transmission/Config.in line 14

Quoted 7 lines
package/transmission/Config.in new file +7 -0
+	help
+	  transmission - Transmission BitTorrent Client
+
+config BR2_PACKAGE_TRANSMISSION_CLI
+	bool "transmissioncli"
+	depends on BR2_PACKAGE_TRANSMISSION
+	default no

Not needed.

package/transmission/Config.in line 21

Quoted 7 lines
package/transmission/Config.in new file +7 -0
+	help
+	  Install transmission command line interface.
+
+config BR2_PACKAGE_TRANSMISSION_REMOTE
+	bool "transmission-remote"
+	depends on BR2_PACKAGE_TRANSMISSION
+	default yes

I'm not sure "default yes" works, we use "default y" everywhere.

package/transmission/Config.in

Quoted 12 lines
package/transmission/Config.in new file +12 -0
+	help
+	  Install transmission remote management tool.
+	if [ ! -z "$NET_INTERFACE" ]; then
+		# poll network interface
+		IFCONFIG_OUTPUT=`ifconfig $NET_INTERFACE`
+		IP_ADDR=`expr match "$IFCONFIG_OUTPUT" '.*inet addr:\([0-9]*\.[0-9]*\.[0-9]*\.[0-9]*\).*'`
+		while [ -z "$IP_ADDR" ]
+		do
+			sleep 5
+			IFCONFIG_OUTPUT=`ifconfig $NET_INTERFACE`
+			IP_ADDR=`expr match "$IFCONFIG_OUTPUT" '.*inet addr:\([0-9]*\.[0-9]*\.[0-9]*\.[0-9]*\).*'`
+		done

Hum, this will stall the boot process quite a bit. We don't have any other solution ?

(I think for the initial introduction of transmission to Buildroot, it's ok, since it won't be a regression, but in the long run, having such scripts doesn't really look nice).

Quoted 6 lines

+++ b/package/transmission/transmission.mk

package/transmission/Config.in new file +4 -0
@@ -0,0 +1,32 @@
+#############################################################
+#
+# transmission
+#

package/transmission/Config.in line 14

Quoted 10 lines
package/transmission/Config.in new file +10 -0
+#############################################################
+#
+#
+TRANSMISSION_VERSION=2.04
+TRANSMISSION_SOURCE=transmission-$(TRANSMISSION_VERSION).tar.bz2
+TRANSMISSION_SITE=http://mirrors.m0k.org/transmission/files/
+TRANSMISSION_LIBTOOL_PATCH=NO
+TRANSMISSION_DEPENDENCIES= host-pkg-config host-intltool zlib openssl libcurl libevent
+
+TRANSMISSION_CONF_OPT = --prefix=/usr \

Remove --prefix=/usr, that's the default.

package/transmission/Config.in line 21

Quoted 7 lines
package/transmission/Config.in new file +7 -0
+			--localstatedir=/var/transmission \
+			--disable-gtk \
+			--disable-libnotify \
+			--enable-daemon \
+			--with-zlib=$(STAGING_DIR) \
+			$(DISABLE_NLS) \
+			$(DISABLE_LARGEFILE)

Remove $(DISABLE_NLS) and $(DISABLE_LARGEFILE), that's the default.

To know what the default options are, look at:
http://git.buildroot.net/buildroot/tree/package/Makefile.autotools.in#n88

The rest looks good to me.

Regards,

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com