Skip to contentSkip to conversation

Need info to understand TeVii S470 cx23885 MSI problem

DISCUSSION Andy Walls 2 participants 5 messages Sep 12, 2010 – Sep 14, 2010 Media (V4L/DVB)

lore
Share & tools
lore

Andy Walls

author
#0 lore raw

Igor,

To help understand the problem with the TeVii S470 CX23885 MSI not working after module unload and reload, could you provide the output of

	# lspci -d 14f1: -xxxx -vvvv

as root before the cx23885 module loads, after the module loads, and after the module is removed and reloaded?

please also provide the MSI IRQ number listed in dmesg
(or /var/log/messages) assigned to the card. Also the IRQ number of the unhandled IRQ when the module is reloaded.

The linux kernel should be writing the MSI IRQ vector into the PCI configuration space of the CX23885. It looks like when you unload and reload the cx23885 module, it is not changing the vector.

Regards,
Andy

#1 lore raw

В сообщении от 12 сентября 2010 22:56:57 автор Andy Walls написал:

Quoted 14 lines

Igor,

To help understand the problem with the TeVii S470 CX23885 MSI not working after module unload and reload, could you provide the output of

	# lspci -d 14f1: -xxxx -vvvv

as root before the cx23885 module loads, after the module loads, and after the module is removed and reloaded?

please also provide the MSI IRQ number listed in dmesg
(or /var/log/messages) assigned to the card. Also the IRQ number of the unhandled IRQ when the module is reloaded.

Quoted 6 lines

The linux kernel should be writing the MSI IRQ vector into the PCI configuration space of the CX23885. It looks like when you unload and reload the cx23885 module, it is not changing the vector.

Regards,
Andy

Andy,
Error appears only and if you zap actual channel(interrupts actually calls). First time module loaded and zapped some channel. At this point there is no errors. /proc/interrupts shows some irq's for cx23885.
Then rmmod-insmod and szap again. Voilla! No irq vector. /proc/interrupts shows zero irq calls for cx23885.
In my case Do_irq complains about irq 153, dmesq says cx23885 uses 45.

My first look not catch anything in lspci.
For now I'm using workaround - find register and bit in cx23885 to write to disable MSI registers. In conjunction with particular card, naturally.

Regards
Igor

CPU0 CPU1

   0:        127          3   IO-APIC-edge      timer
   1:        849        856   IO-APIC-edge      i8042
   4:          1          1   IO-APIC-edge    
   6:          3          2   IO-APIC-edge      floppy
   7:          0          0   IO-APIC-edge      parport0
   8:          0          1   IO-APIC-edge      rtc0
   9:          0          0   IO-APIC-fasteoi   acpi
  12:       4639       4641   IO-APIC-edge      i8042
  14:          0          0   IO-APIC-edge      ata_piix
  15:          0          0   IO-APIC-edge      ata_piix
  16:          0          0   IO-APIC-fasteoi   uhci_hcd:usb5
  18:          0          0   IO-APIC-fasteoi   uhci_hcd:usb4
  19:          0          0   IO-APIC-fasteoi   uhci_hcd:usb3
  23:      19871      19882   IO-APIC-fasteoi   ata_piix, ehci_hcd:usb1, uhci_hcd:usb2
  42:        376        379   PCI-MSI-edge      eth0
  43:        688        688   PCI-MSI-edge      i915
  44:        691        669   PCI-MSI-edge      hda_intel
  45:          0          0   PCI-MSI-edge      cx23885[0]
 NMI:          0          0   Non-maskable interrupts
 LOC:     165490     139525   Local timer interrupts
 SPU:          0          0   Spurious interrupts
 PMI:          0          0   Performance monitoring interrupts
 PND:          0          0   Performance pending work
 RES:       1206       1333   Rescheduling interrupts
 CAL:         45         30   Function call interrupts
 TLB:       1509       1445   TLB shootdowns
 TRM:          0          0   Thermal event interrupts
 THR:          0          0   Threshold APIC interrupts
 MCE:          0          0   Machine check exceptions
 MCP:          5          5   Machine check polls

ERR: 1
MIS: 0

cx23885 driver version 0.0.2 loaded
cx23885 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected] cx23885_dvb_register() allocating 1 frontend(s)
cx23885[0]: cx23885 based dvb card
DS3000 chip version: 0.192 attached.
DVB: registering new adapter (cx23885[0])
DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)... TeVii S470 MAC= 00:18:BD:5B:12:69
cx23885_dev_checkrevision() Hardware revision = 0xb0
cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xfea00000 cx23885 0000:02:00.0: setting latency timer to 64
cx23885 0000:02:00.0: irq 45 for MSI/MSI-X

IR JVC protocol handler initialized
IR Sony protocol handler initialized
lirc_dev: IR Remote Control driver registered, major 251
IR LIRC bridge handler initialized
fuse init (API version 7.14)
EXT3-fs (sda8): using internal journal
lp0: using parport0 (interrupt-driven).
lp0: console ready
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sda9): using internal journal
EXT3-fs (sda9): mounted filesystem with ordered data mode
EXT3-fs: barriers not enabled
kjournald starting. Commit interval 5 seconds
EXT3-fs (sdb5): using internal journal
EXT3-fs (sdb5): mounted filesystem with ordered data mode
r8169 0000:01:00.0: eth0: link up
r8169 0000:01:00.0: eth0: link up
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
warning: `named' uses 32-bit capabilities (legacy support in use)
Installing knfsd (copyright (C) 1996 [email protected]).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
svc: failed to register lockdv1 RPC service (errno 97).
eth0: no IPv6 routers present
cx23885 driver version 0.0.2 loaded
cx23885 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected] cx23885_dvb_register() allocating 1 frontend(s)
cx23885[0]: cx23885 based dvb card
DS3000 chip version: 0.192 attached.
DVB: registering new adapter (cx23885[0])
DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
TeVii S470 MAC= 00:18:BD:5B:12:69
cx23885_dev_checkrevision() Hardware revision = 0xb0
cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xfea00000
cx23885 0000:02:00.0: setting latency timer to 64
cx23885 0000:02:00.0: irq 45 for MSI/MSI-X
[drm:intel_calculate_wm] *ERROR* Insufficient FIFO for plane, expect flickering: entries required = 36, available = 28. [drm:intel_calculate_wm] *ERROR* Insufficient FIFO for plane, expect flickering: entries required = 36, available = 28. [drm:intel_calculate_wm] *ERROR* Insufficient FIFO for plane, expect flickering: entries required = 36, available = 28. [drm:intel_calculate_wm] *ERROR* Insufficient FIFO for plane, expect flickering: entries required = 36, available = 28. [drm:intel_calculate_wm] *ERROR* Insufficient FIFO for plane, expect flickering: entries required = 36, available = 28. [drm:intel_calculate_wm] *ERROR* Insufficient FIFO for plane, expect flickering: entries required = 36, available = 28. cx23885 driver version 0.0.2 loaded
cx23885 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected] cx23885_dvb_register() allocating 1 frontend(s)
cx23885[0]: cx23885 based dvb card
DS3000 chip version: 0.192 attached.
DVB: registering new adapter (cx23885[0])
DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
TeVii S470 MAC= 00:18:BD:5B:12:69
cx23885_dev_checkrevision() Hardware revision = 0xb0
cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xfea00000
cx23885 0000:02:00.0: enabling bus mastering
cx23885 0000:02:00.0: setting latency timer to 64
cx23885 0000:02:00.0: irq 45 for MSI/MSI-X
cx23885 driver version 0.0.2 loaded
cx23885 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected] cx23885_dvb_register() allocating 1 frontend(s)
cx23885[0]: cx23885 based dvb card
DS3000 chip version: 0.192 attached.
DVB: registering new adapter (cx23885[0])
DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
TeVii S470 MAC= 00:18:BD:5B:12:69
cx23885_dev_checkrevision() Hardware revision = 0xb0
cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xfea00000
cx23885 0000:02:00.0: enabling bus mastering
cx23885 0000:02:00.0: setting latency timer to 64
cx23885 0000:02:00.0: irq 45 for MSI/MSI-X
ds3000_firmware_ondemand: Waiting for firmware upload (dvb-fe-ds3000.fw)...
ds3000_firmware_ondemand: Waiting for firmware upload(2)...
ds3000_writereg: writereg error(err == -6, reg == 0x03, value == 0x12)
ds3000_writereg: writereg error(err == -6, reg == 0x03, value == 0x12)
ds3000_writereg: writereg error(err == -6, reg == 0x03, value == 0x12)
ds3000_writereg: writereg error(err == -6, reg == 0x03, value == 0x12)
ds3000_writereg: writereg error(err == -6, reg == 0x03, value == 0x11)
ds3000_writereg: writereg error(err == -6, reg == 0x03, value == 0x11)
ds3000_writereg: writereg error(err == -6, reg == 0x03, value == 0x12)
cx23885 driver version 0.0.2 loaded
cx23885 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected] cx23885_dvb_register() allocating 1 frontend(s)
cx23885[0]: cx23885 based dvb card
DS3000 chip version: 0.192 attached.
DVB: registering new adapter (cx23885[0])
DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
TeVii S470 MAC= 00:18:BD:5B:12:69
cx23885_dev_checkrevision() Hardware revision = 0xb0
cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xfea00000
cx23885 0000:02:00.0: enabling bus mastering
cx23885 0000:02:00.0: setting latency timer to 64
cx23885 0000:02:00.0: irq 45 for MSI/MSI-X
ds3000_writereg: writereg error(err == -6, reg == 0x03, value == 0x12)
do_IRQ: 1.153 No irq handler for vector (irq -1)
do_IRQ: 1.153 No irq handler for vector (irq -1)
ds3000_writereg: writereg error(err == -6, reg == 0x03, value == 0x12)

cx23885 driver version 0.0.2 loaded
cx23885 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected] cx23885_dvb_register() allocating 1 frontend(s)
cx23885[0]: cx23885 based dvb card
DS3000 chip version: 0.192 attached.
DVB: registering new adapter (cx23885[0])
DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
TeVii S470 MAC= 00:18:BD:5B:12:69
cx23885_dev_checkrevision() Hardware revision = 0xb0
cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xfea00000
cx23885 0000:02:00.0: setting latency timer to 64
cx23885 0000:02:00.0: irq 45 for MSI/MSI-X
[drm:intel_calculate_wm] *ERROR* Insufficient FIFO for plane, expect flickering: entries required = 36, available = 28. [drm:intel_calculate_wm] *ERROR* Insufficient FIFO for plane, expect flickering: entries required = 36, available = 28. [drm:intel_calculate_wm] *ERROR* Insufficient FIFO for plane, expect flickering: entries required = 36, available = 28. [drm:intel_calculate_wm] *ERROR* Insufficient FIFO for plane, expect flickering: entries required = 36, available = 28. [drm:intel_calculate_wm] *ERROR* Insufficient FIFO for plane, expect flickering: entries required = 36, available = 28. [drm:intel_calculate_wm] *ERROR* Insufficient FIFO for plane, expect flickering: entries required = 36, available = 28. cx23885 driver version 0.0.2 loaded
cx23885 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
CORE cx23885[0]: subsystem: d470:9022, board: TeVii S470 [card=15,autodetected] cx23885_dvb_register() allocating 1 frontend(s)
cx23885[0]: cx23885 based dvb card
DS3000 chip version: 0.192 attached.
DVB: registering new adapter (cx23885[0])
DVB: registering adapter 0 frontend 0 (Montage Technology DS3000/TS2020)...
TeVii S470 MAC= 00:18:BD:5B:12:69
cx23885_dev_checkrevision() Hardware revision = 0xb0
cx23885[0]/0: found at 0000:02:00.0, rev: 2, irq: 16, latency: 0, mmio: 0xfea00000
cx23885 0000:02:00.0: enabling bus mastering
cx23885 0000:02:00.0: setting latency timer to 64
cx23885 0000:02:00.0: irq 45 for MSI/MSI-X

02:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 02)
Subsystem: Device [d470:9022]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data
Product Name: "
End
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4189
Kernel driver in use: cx23885
Kernel modules: cx23885

02:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 02)
Subsystem: Device [d470:9022]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data
Product Name: "
End
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel modules: cx23885

02:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 02)
Subsystem: Device [d470:9022]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data
Product Name: "
End
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 41a1
Kernel driver in use: cx23885
Kernel modules: cx23885

02:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 02)
Subsystem: Device [d470:9022]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data
Product Name: "
End
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4191
Kernel driver in use: cx23885
Kernel modules: cx23885

02:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 02)
Subsystem: Device [d470:9022]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data
Product Name: "
End
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4189
Kernel modules: cx23885

#2 lore raw

В сообщении от 13 сентября 2010 23:38:28 автор Igor M. Liplianin написал:

Quoted 30 lines

В сообщении от 12 сентября 2010 22:56:57 автор Andy Walls написал:

Quoted 14 lines

Igor,

To help understand the problem with the TeVii S470 CX23885 MSI not working after module unload and reload, could you provide the output of

	# lspci -d 14f1: -xxxx -vvvv

as root before the cx23885 module loads, after the module loads, and after the module is removed and reloaded?

please also provide the MSI IRQ number listed in dmesg
(or /var/log/messages) assigned to the card. Also the IRQ number of the unhandled IRQ when the module is reloaded.

Quoted 6 lines

The linux kernel should be writing the MSI IRQ vector into the PCI configuration space of the CX23885. It looks like when you unload and reload the cx23885 module, it is not changing the vector.

Regards,
Andy

Andy,
Error appears only and if you zap actual channel(interrupts actually calls). First time module loaded and zapped some channel. At this point there is no errors. /proc/interrupts shows some irq's for cx23885. Then rmmod-insmod and szap again. Voilla! No irq vector. /proc/interrupts shows zero irq calls for cx23885.
In my case Do_irq complains about irq 153, dmesq says cx23885 uses 45.

Quoted 6 lines

My first look not catch anything in lspci.
For now I'm using workaround - find register and bit in cx23885 to write to disable MSI registers. In conjunction with particular card, naturally.

Regards
Igor

Forget to mention. The tree is media_tree, branch staging/v2.6.37

Signature · 2 lines
Igor M. Liplianin
Microsoft Windows Free Zone - Linux used for all Computing Tasks
#3 lore raw

В сообщении от 13 сентября 2010 23:41:21 автор Igor M. Liplianin написал:

Quoted 36 lines

В сообщении от 13 сентября 2010 23:38:28 автор Igor M. Liplianin написал:

Quoted 35 lines

В сообщении от 12 сентября 2010 22:56:57 автор Andy Walls написал:

Quoted 14 lines

Igor,

To help understand the problem with the TeVii S470 CX23885 MSI not working after module unload and reload, could you provide the output of

	# lspci -d 14f1: -xxxx -vvvv

as root before the cx23885 module loads, after the module loads, and after the module is removed and reloaded?

please also provide the MSI IRQ number listed in dmesg (or /var/log/messages) assigned to the card. Also the IRQ number of the unhandled IRQ when the module is reloaded.

Quoted 6 lines

The linux kernel should be writing the MSI IRQ vector into the PCI configuration space of the CX23885. It looks like when you unload and reload the cx23885 module, it is not changing the vector.

Regards,
Andy

Andy,
Error appears only and if you zap actual channel(interrupts actually calls). First time module loaded and zapped some channel. At this point there is no errors. /proc/interrupts shows some irq's for cx23885. Then rmmod-insmod and szap again. Voilla! No irq vector. /proc/interrupts shows zero irq calls for cx23885.
In my case Do_irq complains about irq 153, dmesq says cx23885 uses 45.

My first look not catch anything in lspci.
For now I'm using workaround - find register and bit in cx23885 to write to disable MSI registers. In conjunction with particular card, naturally.

Quoted 4 lines
Quoted 2 lines

Regards
Igor

Forget to mention. The tree is media_tree, branch staging/v2.6.37

Sorry, I was inattentive.

bash-4.1# lspci -d 14f1: -xxxx -vvvv
02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 02)
Subsystem: Device d470:9022
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR-
<PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data
Product Name: "
End
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Kernel modules: cx23885
00: f1 14 52 88 06 00 10 00 02 00 00 04 08 00 00 00
10: 04 00 a0 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 70 d4 22 90
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
40: 10 80 01 00 00 00 28 00 10 28 0a 00 11 5c 01 00
50: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 90 22 7e 00 00 00 00 00 00 00 00 00 00 00 00
90: 03 a0 04 80 78 00 00 00 00 00 00 00 00 00 00 00
a0: 05 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

bash-4.1# insmod cx23885.ko
bash-4.1# lspci -d 14f1: -xxxx -vvvv
02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 02)
Subsystem: Device d470:9022
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR-
<PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data
Product Name: "
End
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4189
Kernel driver in use: cx23885
Kernel modules: cx23885
00: f1 14 52 88 06 04 10 00 02 00 00 04 08 00 00 00
10: 04 00 a0 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 70 d4 22 90
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
40: 10 80 01 00 00 00 28 00 10 28 0a 00 11 5c 01 00
50: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 90 22 7e 00 00 00 00 00 00 00 00 00 00 00 00
90: 03 a0 04 80 78 00 00 00 00 00 00 00 00 00 00 00
a0: 05 00 81 00 0c 30 e0 fe 00 00 00 00 89 41 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

bash-4.1# rmmod cx23885
bash-4.1# lspci -d 14f1: -xxxx -vvvv
02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 02)
Subsystem: Device d470:9022
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR-
<PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data
Product Name: "
End
Capabilities: [a0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4189
Kernel modules: cx23885
00: f1 14 52 88 02 00 10 00 02 00 00 04 08 00 00 00
10: 04 00 a0 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 70 d4 22 90
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
40: 10 80 01 00 00 00 28 00 10 28 0a 00 11 5c 01 00
50: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 90 22 7e 00 00 00 00 00 00 00 00 00 00 00 00
90: 03 a0 04 80 78 00 00 00 00 00 00 00 00 00 00 00
a0: 05 00 80 00 0c 30 e0 fe 00 00 00 00 89 41 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

bash-4.1# insmod cx23885.ko
bash-4.1# lspci -d 14f1: -xxxx -vvvv
02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 02)
Subsystem: Device d470:9022
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR-
<PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data
Product Name: "
End
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4191
Kernel driver in use: cx23885
Kernel modules: cx23885
00: f1 14 52 88 06 04 10 00 02 00 00 04 08 00 00 00
10: 04 00 a0 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 70 d4 22 90
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
40: 10 80 01 00 00 00 28 00 10 28 0a 00 11 5c 01 00
50: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 90 22 7e 00 00 00 00 00 00 00 00 00 00 00 00
90: 03 a0 04 80 78 00 00 00 00 00 00 00 00 00 00 00
a0: 05 00 81 00 0c 30 e0 fe 00 00 00 00 91 41 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

bash-4.1# szap -l10750 bridge-tv -x
reading channels from file '/root/.szap/channels.conf'
zapping to 6 'bridge-tv':
sat 1, frequency = 12303 MHz H, symbolrate 27500000, vpid = 0x0134, apid = 0x0100 sid = 0x003b using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 1f | signal fde8 | snr e128 | ber 00000000 | unc 0000000b | FE_HAS_LOCK bash-4.1# lspci -d 14f1: -xxxx -vvvv
02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 02)
Subsystem: Device d470:9022
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR-
<PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data
Product Name: "
End
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4191
Kernel driver in use: cx23885
Kernel modules: cx23885
00: f1 14 52 88 06 04 10 00 02 00 00 04 08 00 00 00
10: 04 00 a0 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 70 d4 22 90
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
40: 10 80 01 00 00 00 28 00 10 28 0a 00 11 5c 01 00
50: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 90 22 7e 00 00 00 00 00 00 00 00 00 00 00 00
90: 03 a0 04 80 78 00 00 00 00 00 00 00 00 00 00 00
a0: 05 00 81 00 0c 30 e0 fe 00 00 00 00 91 41 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

bash-4.1# rmmod cx23885
bash-4.1# insmod cx23885.ko
bash-4.1# lspci -d 14f1: -xxxx -vvvv
02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 02)
Subsystem: Device d470:9022
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR-
<PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data
Product Name: "
End
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4199
Kernel driver in use: cx23885
Kernel modules: cx23885
00: f1 14 52 88 06 04 10 00 02 00 00 04 08 00 00 00
10: 04 00 a0 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 70 d4 22 90
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
40: 10 80 01 00 00 00 28 00 10 28 0a 00 11 5c 01 00
50: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 90 22 7e 00 00 00 00 00 00 00 00 00 00 00 00
90: 03 a0 04 80 78 00 00 00 00 00 00 00 00 00 00 00
a0: 05 00 81 00 0c 30 e0 fe 00 00 00 00 99 41 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

bash-4.1# szap -l10750 bridge-tv -x
reading channels from file '/root/.szap/channels.conf'
zapping to 6 'bridge-tv':
sat 1, frequency = 12303 MHz H, symbolrate 27500000, vpid = 0x0134, apid = 0x0100 sid = 0x003b using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 00 | signal f618 | snr e128 | ber 00000000 | unc 0000000b |

Message from syslogd@localhost at Tue Sep 14 01:00:50 2010 ... localhost kernel: do_IRQ: 0.145 No irq handler for vector (irq -1)

status 00 | signal f618 | snr e128 | ber 00000000 | unc 00000000 | 
status 00 | signal f618 | snr e128 | ber 00000000 | unc 00000000 | 

^C
bash-4.1# lspci -d 14f1: -xxxx -vvvv
02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 02)
Subsystem: Device d470:9022
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR-
FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR-
<PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 45
Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=2M]
Capabilities: [40] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <2us, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Vital Product Data
Product Name: "
End
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4199
Kernel driver in use: cx23885
Kernel modules: cx23885
00: f1 14 52 88 06 04 10 00 02 00 00 04 08 00 00 00
10: 04 00 a0 fe 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 70 d4 22 90
30: 00 00 00 00 40 00 00 00 00 00 00 00 0a 01 00 00
40: 10 80 01 00 00 00 28 00 10 28 0a 00 11 5c 01 00
50: 40 00 11 10 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 90 22 7e 00 00 00 00 00 00 00 00 00 00 00 00
90: 03 a0 04 80 78 00 00 00 00 00 00 00 00 00 00 00
a0: 05 00 81 00 0c 30 e0 fe 00 00 00 00 99 41 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

bash-4.1#

Signature · 2 lines
Igor M. Liplianin
Microsoft Windows Free Zone - Linux used for all Computing Tasks
author
#4 lore raw
Quoted 16 lines · Igor M. Liplianin

В сообщении от 13 сентября 2010 23:41:21 автор Igor M. Liplianin написал:

Quoted 15 lines

В сообщении от 13 сентября 2010 23:38:28 автор Igor M. Liplianin написал:

Quoted 6 lines

В сообщении от 12 сентября 2010 22:56:57 автор Andy Walls написал:

Quoted 3 lines

The linux kernel should be writing the MSI IRQ vector into the PCI configuration space of the CX23885. It looks like when you unload and reload the cx23885 module, it is not changing the vector.

Quoted 6 lines

Error appears only and if you zap actual channel(interrupts actually calls). First time module loaded and zapped some channel. At this point there is no errors. /proc/interrupts shows some irq's for cx23885. Then rmmod-insmod and szap again. Voilla! No irq vector. /proc/interrupts shows zero irq calls for cx23885.
In my case Do_irq complains about irq 153, dmesq says cx23885 uses 45.

Forget to mention. The tree is media_tree, branch staging/v2.6.37

Hi Igor,

On the surface what is going on is now obvious to me:

Quoted 9 lines

bash-4.1# szap -l10750 bridge-tv -x
reading channels from file '/root/.szap/channels.conf'
zapping to 6 'bridge-tv':
sat 1, frequency = 12303 MHz H, symbolrate 27500000, vpid = 0x0134, apid = 0x0100 sid = 0x003b using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 1f | signal fde8 | snr e128 | ber 00000000 | unc 0000000b | FE_HAS_LOCK bash-4.1# lspci -d 14f1: -xxxx -vvvv
02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 02)

Quoted 6 lines
        Subsystem: Device d470:9022

        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee0300c  Data: 4191

a0: 05 00 81 00 0c 30 e0 fe 00 00 00 00 91 41 00 00

             ^                            ^^
             |                            |
MSI Enabled--+                            |
                                          |

Linux MSI vector (0x91 = 145) ------------+

Quoted 11 lines

bash-4.1# rmmod cx23885
bash-4.1# insmod cx23885.ko
bash-4.1# lspci -d 14f1: -xxxx -vvvv
02:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 02)

        Subsystem: Device d470:9022

        Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee0300c  Data: 4199

a0: 05 00 81 00 0c 30 e0 fe 00 00 00 00 99 41 00 00

             ^                            ^^
             |                            |
MSI Enabled--+                            |
                                          |

Linux MSI vector (0x99 = 153) ------------+

Quoted 9 lines

bash-4.1# szap -l10750 bridge-tv -x
reading channels from file '/root/.szap/channels.conf'
zapping to 6 'bridge-tv':
sat 1, frequency = 12303 MHz H, symbolrate 27500000, vpid = 0x0134, apid = 0x0100 sid = 0x003b using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
status 00 | signal f618 | snr e128 | ber 00000000 | unc 0000000b |

Message from syslogd@localhost at Tue Sep 14 01:00:50 2010 ... localhost kernel: do_IRQ: 0.145 No irq handler for vector (irq -1)

                              ^^^
                               |

Previous MSI vector used ------+
(145 = 0x91 and is not 0x99 ! )

The CX23885 hardware is sending the old/previous MSI data in the PCIe MSI message.

The likely reasons I can think of for this to happen are:

1. The CX23885 chip has a bug and send at least one PCIe MSI message with the old MSI data, when the MSI data payload in the PCIe config space of the CX23885 has changed.

2. Your kernel is using the PCI Enhanced Configuration Access Method (Linux calls it MMCONFIG in dmesg) and PCI MMIO Configuration writes to the CX23885 are getting reordered due to motherboard/chipset design problem. Under these conditions, MSI on the CX23885 could be re-enabled before the MSI Data vector is updated in the CX23885's PCI config space.

(See page 5 of:
http://www.pcisig.com/specifications/pciexpress/PciEx_ECN_MMCONFIG_040217.pdf )

To eliminate #2 being a problem, could you please boot your kernel with "pci=nommconf" on the kernel command line and see if the MSI data vector problem goes away?

Regards,
Andy