sched: START_NICE feature (temporarily niced forks)
RFC PATCH 1/1 sched: START_NICE feature (temporarily niced forks)
This patch tweaks the nice value of both the parent and the child after a fork to a higher nice value, but this is only applied to their first slice after the fork. The goal of this scheme is that their respective vruntime will increment faster in the first slice after the fork, so a workload doing many forks (e.g. make -j10) will have a limited impact on latency-sensitive workloads.
This is an alternative to START_DEBIT which does not have the downside of moving newly forked threads to the end of the runqueue.
Latency benchmark:
* wakeup-latency.c (SIGEV_THREAD) with make -j10 on UP 2.0GHz
Kernel used: mainline 2.6.35.2 with smaller min_granularity and check_preempt vruntime vs runtime comparison patches applied.
- START_DEBIT (vanilla setting)
maximum latency: 26409.0 µs
average latency: 6762.1 µs
missed timer events: 0
- NO_START_DEBIT, NO_START_NICE
maximum latency: 10001.8 µs
average latency: 1618.7 µs
missed timer events: 0
- START_NICE
maximum latency: 9873.9 µs
average latency: 901.2 µs
missed timer events: 0
On the Xorg interactivity aspect, I notice a major improvement with START_NICE compared to the two other settings. I just came up with a very simple repeatable low-tech test that takes into account both input and video update responsiveness:
Start make -j10 in a gnome-terminal
In another gnome-terminal, start pressing the space bar, holding it. Use the cursor speed (my cursor is a full rectangle) as latency indicator. With low latency, its speed should be constant, no stopping and no sudden acceleration.
--- include/linux/sched.h | 2 ++ kernel/sched.c | 16 ++++++++++++++-- kernel/sched_fair.c | 30 +++++++++++++++++++++++++++++- kernel/sched_features.h | 6 ++++++ 4 files changed, 51 insertions(+), 3 deletions(-)
kernel/sched_features.h +6 -0
@@ -12,6 +12,12 @@ SCHED_FEAT(GENTLE_FAIR_SLEEPERS, 1)SCHED_FEAT (START_DEBIT ,1 )/* +* After a fork, ensure both the parent and the child get niced for their +* following slice. + */ +SCHED_FEAT (START_NICE ,0 ) + +/* * Should wakeups try to preempt running tasks. */SCHED_FEAT (WAKEUP_PREEMPT ,1 )
include/linux/sched.h +2 -0
@@ -1132,6 +1132,8 @@ struct sched_entity {u64 prev_sum_exec_runtime;u64 nr_migrations; +u64 fork_nice_timeout; +unsigned int fork_nice_penality;#ifdef CONFIG_SCHEDSTATS struct sched_statistics statistics;
kernel/sched.c +14 -2
@@ -1829,6 +1829,8 @@ static void dec_nr_running(struct rq *rqstatic void set_load_weight (struct task_struct *p) { +unsigned int prio; +if (task_has_rt_policy (p)) { p->se.load.weight =0 ; p->se.load.inv_weight =WMULT_CONST ;
@@ -1844,8 +1846,10 @@ static void set_load_weight(struct task_return ; } - p->se.load.weight = prio_to_weight[p->static_prio -MAX_RT_PRIO ]; - p->se.load.inv_weight = prio_to_wmult[p->static_prio -MAX_RT_PRIO ]; + prio = min_t(unsigned int, MAX_PRIO, + p->static_prio + p->se.fork_nice_penality); + p->se.load.weight = prio_to_weight[prio -MAX_RT_PRIO ]; + p->se.load.inv_weight = prio_to_wmult[prio -MAX_RT_PRIO ]; }static void enqueue_task (struct rq *rq,struct task_struct *p,int flags)
@@ -2421,6 +2425,8 @@ static void __sched_fork(struct task_str p->se.sum_exec_runtime =0 ; p->se.prev_sum_exec_runtime =0 ; p->se.nr_migrations =0 ; + p->se.fork_nice_timeout =0 ; + p->se.fork_nice_penality =0 ;#ifdef CONFIG_SCHEDSTATS memset (&p->se.statistics,0 ,sizeof (p->se.statistics));
@@ -2482,7 +2488,13 @@ void sched_fork(struct task_struct *p, iif (p->sched_class->task_fork) p->sched_class->task_fork (p); +if (sched_feat (START_NICE )) { +struct rq *rq =this_rq (); + p->sched_class->put_prev_task (rq, current); +set_load_weight (p); + p->sched_class->set_curr_task (rq); + }/* * The child is not yet in the pid-hash so no cgroup attach races, * and the cgroup is pinned to this child due to cgroup_fork()
kernel/sched_fair.c +29 -1
@@ -513,6 +513,16 @@ __update_curr(struct cfs_rq *cfs_rq, str delta_exec_weighted =calc_delta_fair (delta_exec, curr); curr->vruntime += delta_exec_weighted; +if (curr->fork_nice_penality && curr->fork_nice_timeout !=-1UL ) { + curr->fork_nice_timeout -= delta_exec; +/* +* We cannot update load here while task is enqueued, so +* perform the update lazily at the end of the current (or next) +* dequeue. +*/ +if ((s64 )curr->fork_nice_timeout <0 ) + curr->fork_nice_timeout =-1UL ; + }update_min_vruntime (cfs_rq); }
@@ -832,6 +842,16 @@ dequeue_entity(struct cfs_rq *cfs_rq, st*/ if (!(flags &DEQUEUE_SLEEP )) se->vruntime -= cfs_rq->min_vruntime; + +/* +* We can only set the weight back to its normal value when the task is +* dequeued. +*/ +if (se->fork_nice_timeout ==-1UL ) { + se->fork_nice_penality =0 ; +set_load_weight (task_of (se)); + se->fork_nice_timeout =0 ; + } }/*
@@ -3544,8 +3564,16 @@ static void task_fork_fair(struct task_supdate_curr (cfs_rq); -if (curr) +if (curr) { se->vruntime = curr->vruntime; +if (sched_feat (START_NICE )) { + curr->fork_nice_timeout +=sched_slice (cfs_rq, curr); + curr->fork_nice_penality +=3 ;/* about 50% lighter */ + se->fork_nice_timeout = curr->fork_nice_timeout; + se->fork_nice_penality = curr->fork_nice_penality; +set_load_weight (p); + } + }place_entity (cfs_rq, se,1 );if (sysctl_sched_child_runs_first && curr &&entity_before (curr, se)) {
Signature · 4 lines
Mathieu Desnoyers Operating System Efficiency R&D Consultant EfficiOS Inc. http://www.efficios.com
Quoted 23 lines · Mathieu Desnoyers
This patch tweaks the nice value of both the parent and the child after a fork to a higher nice value, but this is only applied to their first slice after the fork. The goal of this scheme is that their respective vruntime will increment faster in the first slice after the fork, so a workload doing many forks (e.g. make -j10) will have a limited impact on latency-sensitive workloads.
This is an alternative to
START_DEBITwhich does not have the downside of moving newly forked threads to the end of the runqueue.Latency benchmark:
*
wakeup-latency.c(SIGEV_THREAD) with make -j10 on UP 2.0GHzKernel used: mainline 2.6.35.2 with smaller
min_granularityandcheck_preemptvruntime vs runtime comparison patches applied.-
START_DEBIT(vanilla setting)maximum latency: 26409.0 µs
average latency: 6762.1 µs
missed timer events: 0
Quoted 5 lines
-
NO_START_DEBIT,NO_START_NICEmaximum latency: 10001.8 µs
average latency: 1618.7 µs
missed timer events: 0
Tempting ...
Quoted 6 lines
-
START_NICEmaximum latency: 9873.9 µs
average latency: 901.2 µs
missed timer events: 0
Even more tempting! :)
Quoted 9 lines
On the Xorg interactivity aspect, I notice a major improvement with
START_NICEcompared to the two other settings. I just came up with a very simple repeatable low-tech test that takes into account both input and video update responsiveness:Start make -j10 in a gnome-terminal In another gnome-terminal, start pressing the space bar, holding it. Use the cursor speed (my cursor is a full rectangle) as latency indicator. With low latency, its speed should be constant, no stopping and no sudden acceleration.
You may want to run this by Mike - he's the expert on finding interactivity corner-case workloads with scheduler patches. Mike, got time to try out Mathieu's patch?
Ingo
Quoted 48 lines · * Ingo Molnar ([email protected]) wrote:
Quoted 23 lines · Mathieu Desnoyers
This patch tweaks the nice value of both the parent and the child after a fork to a higher nice value, but this is only applied to their first slice after the fork. The goal of this scheme is that their respective vruntime will increment faster in the first slice after the fork, so a workload doing many forks (e.g. make -j10) will have a limited impact on latency-sensitive workloads.
This is an alternative to
START_DEBITwhich does not have the downside of moving newly forked threads to the end of the runqueue.Latency benchmark:
*
wakeup-latency.c(SIGEV_THREAD) with make -j10 on UP 2.0GHzKernel used: mainline 2.6.35.2 with smaller
min_granularityandcheck_preemptvruntime vs runtime comparison patches applied.-
START_DEBIT(vanilla setting)maximum latency: 26409.0 µs
average latency: 6762.1 µs
missed timer events: 0Quoted 5 lines
-
NO_START_DEBIT,NO_START_NICEmaximum latency: 10001.8 µs
average latency: 1618.7 µs
missed timer events: 0Tempting ...
Quoted 6 lines
-
START_NICEmaximum latency: 9873.9 µs
average latency: 901.2 µs
missed timer events: 0Even more tempting! :)
Quoted 5 lines
On the Xorg interactivity aspect, I notice a major improvement with
START_NICEcompared to the two other settings. I just came up with a very simple repeatable low-tech test that takes into account both input and video update responsiveness:
Quoted 8 lines
Quoted 4 lines
Start make -j10 in a gnome-terminal In another gnome-terminal, start pressing the space bar, holding it. Use the cursor speed (my cursor is a full rectangle) as latency indicator. With low latency, its speed should be constant, no stopping and no sudden acceleration.
You may want to run this by Mike - he's the expert on finding interactivity corner-case workloads with scheduler patches. Mike, got time to try out Mathieu's patch?
I'm working on a new version at the moment. The previous one had a few bugs in it when it comes to weight updates, and I fear some of the latency improvements I've seen were caused by the whole build process ending up being niced all the time. I'm currently working on a "simplified but not optimal" version, with added sched_debug output, to make sure I get it right.
I'll keep you posted.
Thanks!
Mathieu
Signature · 4 lines
Mathieu Desnoyers Operating System Efficiency R&D Consultant EfficiOS Inc. http://www.efficios.com