ux500: add ab8500-regulators machine specific data
Subsystems (3)
PATCH v5 1/1 ux500: add ab8500-regulators machine specific data
From: Sundar R Iyer <[email protected]>
---
Thanx a bunch to Mark for being so persistent and helpful :)
v5:
- corrected the voltage regulator names as suggested by Mark
- corrcted the voltage ranges for the approproate regulators
v4:
- make all structs as static
- remove NULL initialization
v3:
- Empty the consumer supply definitions themselves
- Change regulator permissions REGULATOR_CHANGE_VOLTAGE for fixed supplies
v2:
- Empty the regulator_consumer_supply since there is no actual device to supply
v1:
- Removed NULL device reference
arch/arm/mach-ux500/Makefile | 1 + arch/arm/mach-ux500/board-mop500-regulators.c | 101 +++++++++++++++++++++++++ 2 files changed, 102 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-ux500/board-mop500-regulators.c
arch/arm/mach-ux500/Makefile +1 -0
@@ -10,3 +10,4 @@ obj-$(CONFIG_MACH_U5500) += board-u5500.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o +obj-$(CONFIG_REGULATOR_AB8500) += board-mop500-regulators.o
arch/arm/mach-ux500/board-mop500-regulators.c new file +101 -0
101 lines not on this page · raw message
Signature · 1 line
1.7.2.dirty
PATCH v5 1/1 ux500: add ab8500-regulators machine specific data
Quoted 5 lines · Sundar Iyer
From: Sundar R Iyer <[email protected]>
Acked-by Linus Walleij <[email protected]>Acked-by Bengt JONSSON <[email protected]>Signed-off-by Sundar R Iyer <[email protected]>
Looks good.