Skip to contentSkip to conversation

i915 regression (??)

DISCUSSION Felipe Balbi 2 participants 6 messages Sep 20, 2010 – Dec 6, 2010

lore
Share & tools
lore
#0 lore raw

Hi David,

I believe 2.6.36-rc4 has a regresion ? With .32 (debian sid package) I had everything working fine, but with .36-rc4 no output comes on LVDS, only on my HDMI external monitor. Here's the xrandr output:

$ xrandr
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 8192 x 8192
(null)1 connected (normal left inverted right x axis y axis)
	1440x900       60.0 +   40.0  
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm
	1280x1024      60.0*+   75.0  
	1152x864       75.0  
	1024x768       85.0     75.1     70.1     60.0  
	832x624        74.6  
	800x600        85.1     72.2     75.0     60.3
	56.2  
	640x480        85.0     72.8     75.0     66.7
	60.0  
	720x400        70.1  
	640x400        70.0  
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)

See the first output is "(null)1" and I believe that's what's causing errors.

Signature · 1 line
balbi
#1 lore raw
Quoted 20 lines · Felipe Balbi

Hi David,

I believe 2.6.36-rc4 has a regresion ? With .32 (debian sid package) I had everything working fine, but with .36-rc4 no output comes on LVDS, only on my HDMI external monitor. Here's the xrandr output:

$ xrandr
Screen 0: minimum 320 x 200, current 1280 x 1024, maximum 8192 x 8192
(null)1 connected (normal left inverted right x axis y axis)
	1440x900       60.0 +   40.0  VGA1 disconnected (normal left inverted 
right x axis y axis)
HDMI1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm
	1280x1024      60.0*+   75.0  	1152x864       75.0  	1024x768       
85.0     75.1     70.1     60.0  	832x624        74.6  	800x600        85.1     72.2     75.0     60.3
	56.2  	640x480        85.0     72.8     75.0     66.7
	60.0  	720x400        70.1  	640x400        70.0  DP1 disconnected 
(normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
Quoted 2 lines

See the first output is "(null)1" and I believe that's what's causing errors.

disabling kms didn't help, BTW.

Signature · 1 line
balbi
#2 lore raw
In reply to Felipe Balbi
Quoted 3 lines · Felipe Balbi

I believe 2.6.36-rc4 has a regresion ? With .32 (debian sid package) I had everything working fine, but with .36-rc4 no output comes on LVDS, only on my HDMI external monitor. Here's the xrandr output:

You don't have LVDS, but eDP. We are working on getting the power-on sequence correct for all systems but alas we still in the phase where we fix it for some machines and cause others to fail.
-Chris

Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
#3 lore raw
Quoted 8 lines · Chris Wilson
Quoted 3 lines · Felipe Balbi

I believe 2.6.36-rc4 has a regresion ? With .32 (debian sid package) I had everything working fine, but with .36-rc4 no output comes on LVDS, only on my HDMI external monitor. Here's the xrandr output:

You don't have LVDS, but eDP. We are working on getting the power-on sequence correct for all systems but alas we still in the phase where we fix it for some machines and cause others to fail.

.37-rc3 and it's still broken. Any ways I could help ? I have at least a machine to test (Dell e6410). It works sometimes out of luck and others, only rebooting.

Signature · 1 line
balbi
Tested-by Zhao Jian
#4 lore raw
Quoted 3 lines · Felipe Balbi

.37-rc3 and it's still broken. Any ways I could help ? I have at least a machine to test (Dell e6410). It works sometimes out of luck and others, only rebooting.

Dave Airlie bisected the regression and it was duly reverted. That revert is available in ickle/drm-intel-fixes, airlied/drm-fixes and linus/master:

commit 3cf2efb1a7c68d55d60dcb2ed9609e1a2fc25952

Author: Chris Wilson <[email protected]>
Date:   Mon Nov 29 10:09:55 2010 +0000

Revert "drm/i915/dp: use VBT provided eDP params if available"

This reverts commit 869184a675662bddcdf76c5b95665272facff2b8.

This is required for the Sony Vaio Jesse was working on at the time, but breaks most other eDP machines - machines that were working in earlier kernels.

Reported-and-tested-by Dave Airlie <[email protected]>

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31188

Can you test whether this is sufficient for you as well? -Chris

Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
#5 lore raw
Quoted 20 lines · Chris Wilson
Quoted 3 lines · Felipe Balbi

.37-rc3 and it's still broken. Any ways I could help ? I have at least a machine to test (Dell e6410). It works sometimes out of luck and others, only rebooting.

Dave Airlie bisected the regression and it was duly reverted. That revert is available in ickle/drm-intel-fixes, airlied/drm-fixes and linus/master:

commit 3cf2efb1a7c68d55d60dcb2ed9609e1a2fc25952

Author: Chris Wilson <[email protected]>
Date:   Mon Nov 29 10:09:55 2010 +0000

Revert "drm/i915/dp: use VBT provided eDP params if available"

This reverts commit 869184a675662bddcdf76c5b95665272facff2b8.

This is required for the Sony Vaio Jesse was working on at the time, but breaks most other eDP machines - machines that were working in earlier kernels.

Quoted 6 lines
Reported-and-tested-by Dave Airlie <[email protected]>

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31188

Can you test whether this is sufficient for you as well?

Just tested, same problem. I'll check again later if I did something wrong.

Signature · 1 line
balbi