Skip to contentSkip to conversation

rsync causing high loads on 2.6.36-rc4

DISCUSSION Thomas Fjellstrom 1 participant 2 messages Sep 22, 2010

lore
Share & tools
lore
#0 lore raw

This isn't something I remember happening with older kernels, but I just started an rsync from an nfs share over GbE, to a external SATA drive over usb 2, and I'm seeing both of my laptop's cores hitting 80-100% cpu use, two rsync processes are using 20-40% each, some kworker's are using tiny bits (2-10%), and kswapd0 is hovering around 5%. Quite a lot of the time seems to be io- wait. load average is almost at 6.

This is a dual core T9400 core2duo laptop, with 4GB ram, running full amd64 (64bit 2.6.36-rc4 kernel and userspace).

Its impacting desktop interactivity quite a lot.

Signature · 2 lines
Thomas Fjellstrom
[email protected]
#1 lore raw
Quoted 11 lines · Thomas Fjellstrom

This isn't something I remember happening with older kernels, but I just started an rsync from an nfs share over GbE, to a external SATA drive over usb 2, and I'm seeing both of my laptop's cores hitting 80-100% cpu use, two rsync processes are using 20-40% each, some kworker's are using tiny bits (2-10%), and kswapd0 is hovering around 5%. Quite a lot of the time seems to be io- wait. load average is almost at 6.

This is a dual core T9400 core2duo laptop, with 4GB ram, running full amd64 (64bit 2.6.36-rc4 kernel and userspace).

Its impacting desktop interactivity quite a lot.

It's not quite as bad with a regular cp, but it does affect my laptop in the same way.

Signature · 2 lines
Thomas Fjellstrom
[email protected]