using decrypt_derived on a second (non-swap) partition
Hi,
Is it possible to use the decrypt_derived script to mount a second (non-swap) partition with the same passphrase as the root partition?
I tried the following et /etc/crypttab:
cmd1 /dev/md1 none luks
# cmd2 /dev/md2 none luks
cmd2 /dev/md2 cmd1 keyscript=/lib/cryptsetup/scripts/decrypt_derived,luks
(/dev/mapper/cmd2 is mounted on /backup)
But I get this error when running "/etc/init.d/cryptdisks restart":
galba:/home/ldm# /etc/init.d/cryptdisks restart Stopping remaining crypto disks...cmd1 (busy)...cmd2 (stopped)...done. Starting remaining crypto disks...cmd1 (running)...cmd2 (starting)... No key available with this passphrase. No key available with this passphrase. No key available with this passphrase. cmd2 (failed)...failed. done.
Hey Louis,
this mailinglist is not the right place to discuss distribution specific features. decrypt_derived is a keyscript which is provided by the debian cryptsetup package. please use the debian bugtracking system (bugs.debian.org) or [email protected] instead.
Quoted 13 lines · On 23/09/2010 Louis-David Mitterrand wrote:
Is it possible to use the
decrypt_derivedscript to mount a second (non-swap) partition with the same passphrase as the root partition?I tried the following et
/etc/crypttab:cmd1
/dev/md1none luks
# cmd2/dev/md2none luks
cmd2/dev/md2cmd1 keyscript=/lib/cryptsetup/scripts/decrypt_derived,luks(
/dev/mapper/cmd2is mounted on /backup)But I get this error when running "
/etc/init.d/cryptdisksrestart":
Quoted 8 lines
galba:/home/ldm# /etc/init.d/cryptdisks restart Stopping remaining crypto disks...cmd1 (busy)...cmd2 (stopped)...done. Starting remaining crypto disks...cmd1 (running)...cmd2 (starting)... No key available with this passphrase. No key available with this passphrase. No key available with this passphrase. cmd2 (failed)...failed. done.
you need to add the relevant key to /dev/md2 first.
see section '9. The "decrypt_derived" keyscript' at /usr/share/doc/cryptsetup/README.initramfs.gz for more information.
in short, do the following:
get the key:
$ /lib/cryptsetup/scripts/decrypt_derived cmd1
add the new key:
$ cryptsetup luksAddKey /dev/md2 [ paste the derived key as new passphrase ]
afterwards, unlocking md2 with the derived key should work.
greetings,
jonas
Quoted 7 lines · Jonas Meurer
Hey Louis,
this mailinglist is not the right place to discuss distribution specific features.
decrypt_derivedis a keyscript which is provided by the debian cryptsetup package. please use the debian bugtracking system (bugs.debian.org) or [email protected] instead.
Hi,
Can I have similar functionality without using debian's decrypt_derived?
Quoted 29 lines · On 23/09/2010 Louis-David Mitterrand wrote:
Quoted 13 lines
Is it possible to use the
decrypt_derivedscript to mount a second (non-swap) partition with the same passphrase as the root partition?I tried the following et
/etc/crypttab:cmd1
/dev/md1none luks
# cmd2/dev/md2none luks
cmd2/dev/md2cmd1 keyscript=/lib/cryptsetup/scripts/decrypt_derived,luks(
/dev/mapper/cmd2is mounted on /backup)But I get this error when running "
/etc/init.d/cryptdisksrestart":Quoted 8 lines
galba:/home/ldm# /etc/init.d/cryptdisks restart Stopping remaining crypto disks...cmd1 (busy)...cmd2 (stopped)...done. Starting remaining crypto disks...cmd1 (running)...cmd2 (starting)... No key available with this passphrase. No key available with this passphrase. No key available with this passphrase. cmd2 (failed)...failed. done.you need to add the relevant key to
/dev/md2first.
see section '9. The "decrypt_derived" keyscript' at/usr/share/doc/cryptsetup/README.initramfs.gzfor more information.in short, do the following:
Quoted 8 lines
get the key:
$ /lib/cryptsetup/scripts/decrypt_derived cmd1add the new key:
$ cryptsetup luksAddKey /dev/md2 [ paste the derived key as new passphrase ]afterwards, unlocking md2 with the derived key should work.
Yes it works well, thanks.