arm: fix use of clock disable on idle for AT91x40 devices
PATCH 1/1 arm: fix use of clock disable on idle for AT91x40 devices
The simpler AT91x40 processors do not have the same power management controller as the new AT91 devices. They do have a simpler power controller module that we can use to disable the CPU clock at idle time. Add code to support that.
Signed-off-by Greg Ungerer <[email protected]>
--- arch/arm/mach-at91/include/mach/at91x40.h | 6 ++++++ arch/arm/mach-at91/include/mach/system.h | 4 ++++ 2 files changed, 10 insertions(+), 0 deletions(-)
arch/arm/mach-at91/include/mach/at91x40.h +6 -0
@@ -52,4 +52,10 @@#define AT91_DBGU_CIDR (AT91_SF + 0)/* CIDR in PS segment */ #define AT91_DBGU_EXID (AT91_SF + 4)/* EXID in PS segment */ +/* +* Support defines for the simple Power Controller module. +*/ +#define AT91_PS_CR (AT91_PS + 0)/* PS Control register */ +#define AT91_PS_CR_CPU (1 << 0)/* CPU clock disable bit */ +#endif /* AT91X40_H */
arch/arm/mach-at91/include/mach/system.h +4 -0
@@ -33,7 +33,11 @@ static inline void arch_idle(void)* Disable the processor clock. The processor will be automatically * re-enabled by an interrupt or by a reset. */ +#ifdef AT91_PS +at91_sys_write (AT91_PS_CR ,AT91_PS_CR_CPU ); +#else at91_sys_write (AT91_PMC_SCDR ,AT91_PMC_PCK ); +#endif #else /* * Set the processor (CP15) into 'Wait for Interrupt' mode.
PATCH 1/1 arm: fix use of clock disable on idle for AT91x40 devices
Quoted 6 lines · Greg Ungerer
The simpler AT91x40 processors do not have the same power management controller as the new AT91 devices. They do have a simpler power controller module that we can use to disable the CPU clock at idle time. Add code to support that.
Signed-off-by Greg Ungerer <[email protected]>
Best Regards,
J.