Skip to contentSkip to conversation

RX handling consolidation

RFC In review Johannes Berg 2 participants 6 messages Sep 23, 2010 – Sep 24, 2010 mac80211

lore
Share & tools
lore

Johannes Berg

author maintainer
#0 lore raw

v2 cover RX handling consolidation

same thing as before ... just not on top of my other patches.

johannes

author maintainer
#1 lore raw

RFC v2 1/3 mac80211: remove prepare_for_handlers sdata argument

From: Johannes Berg <[email protected]>

The first argument to prepare_for_handlers is always the sdata that can just be stored in rx data directly (and even already is, in two of four code paths.)

---
 net/mac80211/rx.c |   16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
net/mac80211/rx.c +8 -8
@@ -2513,10 +2513,10 @@ void ieee80211_release_reorder_timeout(s
 
 /* main receive path */
 
-static int prepare_for_handlers(struct ieee80211_sub_if_data *sdata,
-				struct ieee80211_rx_data *rx,
+static int prepare_for_handlers(struct ieee80211_rx_data *rx,
 				struct ieee80211_hdr *hdr)
 {
+	struct ieee80211_sub_if_data *sdata = rx->sdata;
 	struct sk_buff *skb = rx->skb;
 	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
 	u8 *bssid = ieee80211_get_bssid(hdr, skb->len, sdata->vif.type);
@@ -2656,7 +2656,7 @@ static void __ieee80211_rx_handle_packet
 			rx.sdata = prev_sta->sdata;
 
 			rx.flags |= IEEE80211_RX_RA_MATCH;
-			prepares = prepare_for_handlers(rx.sdata, &rx, hdr);
+			prepares = prepare_for_handlers(&rx, hdr);
 			if (!prepares)
 				goto next_sta;
 
@@ -2690,7 +2690,7 @@ next_sta:
 			rx.sdata = prev_sta->sdata;
 
 			rx.flags |= IEEE80211_RX_RA_MATCH;
-			prepares = prepare_for_handlers(rx.sdata, &rx, hdr);
+			prepares = prepare_for_handlers(&rx, hdr);
 			if (!prepares)
 				prev_sta = NULL;
 
@@ -2733,15 +2733,15 @@ next_sta:
 			}
 
 			rx.sta = sta_info_get_bss(prev, hdr->addr2);
+			rx.sdata = prev;
 
 			rx.flags |= IEEE80211_RX_RA_MATCH;
-			prepares = prepare_for_handlers(prev, &rx, hdr);
+			prepares = prepare_for_handlers(&rx, hdr);
 
 			if (!prepares)
 				goto next;
 
 			if (status->flag & RX_FLAG_MMIC_ERROR) {
-				rx.sdata = prev;
 				if (rx.flags & IEEE80211_RX_RA_MATCH)
 					ieee80211_rx_michael_mic_report(hdr,
 									&rx);
@@ -2768,15 +2768,15 @@ next:
 
 		if (prev) {
 			rx.sta = sta_info_get_bss(prev, hdr->addr2);
+			rx.sdata = prev;
 
 			rx.flags |= IEEE80211_RX_RA_MATCH;
-			prepares = prepare_for_handlers(prev, &rx, hdr);
+			prepares = prepare_for_handlers(&rx, hdr);
 
 			if (!prepares)
 				prev = NULL;
 
 			if (prev && status->flag & RX_FLAG_MMIC_ERROR) {
-				rx.sdata = prev;
 				if (rx.flags & IEEE80211_RX_RA_MATCH)
 					ieee80211_rx_michael_mic_report(hdr,
 									&rx);
#2 lore raw

Re: [RFC v2 1/3] mac80211: remove prepare_for_handlers sdata argument

I applied these 3 patches and using two STA interfaces on ath9k appears to work fine. I'll leave them in my tree and continue testing.

Thanks,
Ben

Signature · 2 lines
Ben Greear <[email protected]>
Candela Technologies Inc  http://www.candelatech.com
author maintainer
#3 lore raw

Re: [RFC v2 1/3] mac80211: remove prepare_for_handlers sdata argument

Quoted 3 lines · Ben Greear

I applied these 3 patches and using two STA interfaces on ath9k appears to work fine. I'll leave them in my tree and continue testing.

Thanks, I've also tested them with two AP interfaces and it works fine, will be submitting them momentarily.

johannes

author maintainer
#4 lore raw

RFC v2 2/3 mac80211: consolidate packet processing

In reply to Johannes Berg

From: Johannes Berg <[email protected]>

There are now four instances of vaguely the same code that does packet preparation, checking if for MMIC errors and reporting them, and then invoking packet processing. Consolidate all of these.

---
 net/mac80211/rx.c |  165 ++++++++++++++++++++----------------------------------
 1 file changed, 62 insertions(+), 103 deletions(-)
net/mac80211/rx.c +62 -103
@@ -2443,18 +2443,13 @@ static void ieee80211_rx_handlers(struct
 	}
 }
 
-static void ieee80211_invoke_rx_handlers(struct ieee80211_sub_if_data *sdata,
-					 struct ieee80211_rx_data *rx,
-					 struct sk_buff *skb)
+static void ieee80211_invoke_rx_handlers(struct ieee80211_rx_data *rx)
 {
 	struct sk_buff_head reorder_release;
 	ieee80211_rx_result res = RX_DROP_MONITOR;
 
 	__skb_queue_head_init(&reorder_release);
 
-	rx->skb = skb;
-	rx->sdata = sdata;
-
 #define CALL_RXH(rxh)			\
 	do {				\
 		res = rxh(rx);		\
@@ -2598,21 +2593,63 @@ static int prepare_for_handlers(struct i
 }
 
 /*
+ * This function returns whether or not the SKB
+ * was destined for RX processing or not, which,
+ * if consume is true, is equivalent to whether
+ * or not the skb was consumed.
+ */
+static bool ieee80211_prepare_and_rx_handle(struct ieee80211_rx_data *rx,
+					    struct sk_buff *skb, bool consume)
+{
+	struct ieee80211_local *local = rx->local;
+	struct ieee80211_sub_if_data *sdata = rx->sdata;
+	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(rx->skb);
+	struct ieee80211_hdr *hdr = (void *)skb->data;
+	int prepares;
+
+	rx->skb = skb;
+	rx->flags |= IEEE80211_RX_RA_MATCH;
+	prepares = prepare_for_handlers(rx, hdr);
+
+	if (!prepares)
+		return false;
+
+	if (status->flag & RX_FLAG_MMIC_ERROR) {
+		if (rx->flags & IEEE80211_RX_RA_MATCH)
+			ieee80211_rx_michael_mic_report(hdr, rx);
+		return false;
+	}
+
+	if (!consume) {
+		skb = skb_copy(skb, GFP_ATOMIC);
+		if (!skb) {
+			if (net_ratelimit())
+				wiphy_debug(local->hw.wiphy,
+					"failed to copy multicast frame for %s\n",
+					sdata->name);
+			return true;
+		}
+
+		rx->skb = skb;
+	}
+
+	ieee80211_invoke_rx_handlers(rx);
+	return true;
+}
+
+/*
  * This is the actual Rx frames handler. as it blongs to Rx path it must
  * be called with rcu_read_lock protection.
  */
 static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
 					 struct sk_buff *skb)
 {
-	struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);
 	struct ieee80211_local *local = hw_to_local(hw);
 	struct ieee80211_sub_if_data *sdata;
 	struct ieee80211_hdr *hdr;
 	__le16 fc;
 	struct ieee80211_rx_data rx;
-	int prepares;
-	struct ieee80211_sub_if_data *prev = NULL;
-	struct sk_buff *skb_new;
+	struct ieee80211_sub_if_data *prev;
 	struct sta_info *sta, *tmp, *prev_sta;
 	bool found_sta = false;
 	int err = 0;
@@ -2645,8 +2682,10 @@ static void __ieee80211_rx_handle_packet
 
 	if (ieee80211_is_data(fc)) {
 		prev_sta = NULL;
+
 		for_each_sta_info(local, hdr->addr2, sta, tmp) {
 			found_sta = true;
+
 			if (!prev_sta) {
 				prev_sta = sta;
 				continue;
@@ -2654,65 +2693,23 @@ static void __ieee80211_rx_handle_packet
 
 			rx.sta = prev_sta;
 			rx.sdata = prev_sta->sdata;
+			ieee80211_prepare_and_rx_handle(&rx, skb, false);
 
-			rx.flags |= IEEE80211_RX_RA_MATCH;
-			prepares = prepare_for_handlers(&rx, hdr);
-			if (!prepares)
-				goto next_sta;
-
-			if (status->flag & RX_FLAG_MMIC_ERROR) {
-				if (rx.flags & IEEE80211_RX_RA_MATCH)
-					ieee80211_rx_michael_mic_report(hdr, &rx);
-				goto next_sta;
-			}
-
-			/*
-			 * frame was destined for the previous interface
-			 * so invoke RX handlers for it
-			 */
-			skb_new = skb_copy(skb, GFP_ATOMIC);
-			if (!skb_new) {
-				if (net_ratelimit())
-					wiphy_debug(local->hw.wiphy,
-						    "failed to copy multicast"
-						    " frame for %s\n",
-						    prev_sta->sdata->name);
-				goto next_sta;
-			}
-			ieee80211_invoke_rx_handlers(prev_sta->sdata, &rx,
-						     skb_new);
-next_sta:
 			prev_sta = sta;
-		} /* for all STA info */
+		}
 
 		if (prev_sta) {
 			rx.sta = prev_sta;
 			rx.sdata = prev_sta->sdata;
 
-			rx.flags |= IEEE80211_RX_RA_MATCH;
-			prepares = prepare_for_handlers(&rx, hdr);
-			if (!prepares)
-				prev_sta = NULL;
-
-			if (prev_sta && status->flag & RX_FLAG_MMIC_ERROR) {
-				if (rx.flags & IEEE80211_RX_RA_MATCH)
-					ieee80211_rx_michael_mic_report(hdr, &rx);
-				prev_sta = NULL;
-			}
-		}
-
-
-		if (prev_sta) {
-			ieee80211_invoke_rx_handlers(prev_sta->sdata, &rx, skb);
-			return;
-		} else {
-			if (found_sta) {
-				dev_kfree_skb(skb);
+			if (ieee80211_prepare_and_rx_handle(&rx, skb, true))
 				return;
-			}
 		}
-	} /* if data frame */
+	}
+
 	if (!found_sta) {
+		prev = NULL;
+
 		list_for_each_entry_rcu(sdata, &local->interfaces, list) {
 			if (!ieee80211_sdata_running(sdata))
 				continue;
@@ -2734,35 +2731,8 @@ next_sta:
 
 			rx.sta = sta_info_get_bss(prev, hdr->addr2);
 			rx.sdata = prev;
+			ieee80211_prepare_and_rx_handle(&rx, skb, false);
 
-			rx.flags |= IEEE80211_RX_RA_MATCH;
-			prepares = prepare_for_handlers(&rx, hdr);
-
-			if (!prepares)
-				goto next;
-
-			if (status->flag & RX_FLAG_MMIC_ERROR) {
-				if (rx.flags & IEEE80211_RX_RA_MATCH)
-					ieee80211_rx_michael_mic_report(hdr,
-									&rx);
-				goto next;
-			}
-
-			/*
-			 * frame was destined for the previous interface
-			 * so invoke RX handlers for it
-			 */
-
-			skb_new = skb_copy(skb, GFP_ATOMIC);
-			if (!skb_new) {
-				if (net_ratelimit())
-					wiphy_debug(local->hw.wiphy,
-						    "failed to copy multicast frame for %s\n",
-						    prev->name);
-				goto next;
-			}
-			ieee80211_invoke_rx_handlers(prev, &rx, skb_new);
-next:
 			prev = sdata;
 		}
 
@@ -2770,24 +2740,13 @@ next:
 			rx.sta = sta_info_get_bss(prev, hdr->addr2);
 			rx.sdata = prev;
 
-			rx.flags |= IEEE80211_RX_RA_MATCH;
-			prepares = prepare_for_handlers(&rx, hdr);
-
-			if (!prepares)
-				prev = NULL;
-
-			if (prev && status->flag & RX_FLAG_MMIC_ERROR) {
-				if (rx.flags & IEEE80211_RX_RA_MATCH)
-					ieee80211_rx_michael_mic_report(hdr,
-									&rx);
-				prev = NULL;
-			}
+			if (ieee80211_prepare_and_rx_handle(&rx, skb, true))
+				return;
 		}
+
 	}
-	if (prev)
-		ieee80211_invoke_rx_handlers(prev, &rx, skb);
-	else
-		dev_kfree_skb(skb);
+
+	dev_kfree_skb(skb);
 }
 
 /*
author maintainer
#5 lore raw

RFC v2 3/3 mac80211: clean up rx handling wrt. found_sta

In reply to Johannes Berg

From: Johannes Berg <[email protected]>

If a station was found, then we'll have exited
the function already, so it is not necessary to
have a variable keeping track of it.

---
 net/mac80211/rx.c |   60 ++++++++++++++++++++++++------------------------------
 1 file changed, 27 insertions(+), 33 deletions(-)
net/mac80211/rx.c +27 -33
@@ -2651,7 +2651,6 @@ static void __ieee80211_rx_handle_packet
 	struct ieee80211_rx_data rx;
 	struct ieee80211_sub_if_data *prev;
 	struct sta_info *sta, *tmp, *prev_sta;
-	bool found_sta = false;
 	int err = 0;
 
 	fc = ((struct ieee80211_hdr *)skb->data)->frame_control;
@@ -2684,8 +2683,6 @@ static void __ieee80211_rx_handle_packet
 		prev_sta = NULL;
 
 		for_each_sta_info(local, hdr->addr2, sta, tmp) {
-			found_sta = true;
-
 			if (!prev_sta) {
 				prev_sta = sta;
 				continue;
@@ -2707,43 +2704,40 @@ static void __ieee80211_rx_handle_packet
 		}
 	}
 
-	if (!found_sta) {
-		prev = NULL;
-
-		list_for_each_entry_rcu(sdata, &local->interfaces, list) {
-			if (!ieee80211_sdata_running(sdata))
-				continue;
-
-			if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
-			    sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
-				continue;
-
-			/*
-			 * frame is destined for this interface, but if it's
-			 * not also for the previous one we handle that after
-			 * the loop to avoid copying the SKB once too much
-			 */
+	prev = NULL;
 
-			if (!prev) {
-				prev = sdata;
-				continue;
-			}
-
-			rx.sta = sta_info_get_bss(prev, hdr->addr2);
-			rx.sdata = prev;
-			ieee80211_prepare_and_rx_handle(&rx, skb, false);
+	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
+		if (!ieee80211_sdata_running(sdata))
+			continue;
+
+		if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
+		    sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
+			continue;
+
+		/*
+		 * frame is destined for this interface, but if it's
+		 * not also for the previous one we handle that after
+		 * the loop to avoid copying the SKB once too much
+		 */
 
+		if (!prev) {
 			prev = sdata;
+			continue;
 		}
 
-		if (prev) {
-			rx.sta = sta_info_get_bss(prev, hdr->addr2);
-			rx.sdata = prev;
+		rx.sta = sta_info_get_bss(prev, hdr->addr2);
+		rx.sdata = prev;
+		ieee80211_prepare_and_rx_handle(&rx, skb, false);
 
-			if (ieee80211_prepare_and_rx_handle(&rx, skb, true))
-				return;
-		}
+		prev = sdata;
+	}
+
+	if (prev) {
+		rx.sta = sta_info_get_bss(prev, hdr->addr2);
+		rx.sdata = prev;
 
+		if (ieee80211_prepare_and_rx_handle(&rx, skb, true))
+			return;
 	}
 
 	dev_kfree_skb(skb);