atmel_lcd: Allow contrast polarity to be either positive or negative
Subsystems (2)
PATCH 1/1 atmel_lcd: Allow contrast polarity to be either positive or negative
Signed-off-by Alexander Stein <[email protected]>
--- drivers/video/atmel_lcdfb.c | 3 ++- include/lcd.h | 1 + 2 files changed, 3 insertions(+), 1 deletions(-)
drivers/video/atmel_lcdfb.c +2 -1
@@ -143,8 +143,9 @@ void lcd_ctrl_init(void *lcdbase)/* Set contrast */ value =ATMEL_LCDC_PS_DIV8 | -ATMEL_LCDC_POL_POSITIVE |ATMEL_LCDC_ENA_PWMENABLE ; +if (!panel_info.vl_cont_pol_low) + value |=ATMEL_LCDC_POL_POSITIVE ;lcdc_writel (panel_info.mmio,ATMEL_LCDC_CONTRAST_CTR , value);lcdc_writel (panel_info.mmio,ATMEL_LCDC_CONTRAST_VAL ,ATMEL_LCDC_CVAL_DEFAULT );
include/lcd.h +1 -0
@@ -167,6 +167,7 @@ typedef struct vidinfo {u_long vl_sync;/* Horizontal / vertical sync */ u_long vl_bpix;/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */ u_long vl_tft;/* 0 = passive, 1 = TFT */ +u_long vl_cont_pol_low;/* contrast polarity is low */ /* Horizontal control register. */ u_long vl_hsync_len;/* Length of horizontal sync */
Signature · 1 line
1.7.1
PATCH 1/1 atmel_lcd: Allow contrast polarity to be either positive or negative
Hi Alexander,
Quoted 5 lines · On Tue, 20 Jul 2010 08:55:40 +0200 Alexander Stein…
Signed-off-by Alexander Stein <[email protected]>--- drivers/video/atmel_lcdfb.c | 3 ++- include/lcd.h | 1 + 2 files changed, 3 insertions(+), 1 deletions(-)
Applied to u-boot-video/next. Thanks!
Anatolij