m68knommu: change to new flag variables
Subsystems (2)
PATCH 8/20 m68knommu: change to new flag variables
Replace EXTRA_CFLAGS with ccflags-y and EXTRA_AFLAGS with asflags-y.
--- arch/m68knommu/platform/5206/Makefile | 4 ++-- arch/m68knommu/platform/5206e/Makefile | 4 ++-- arch/m68knommu/platform/520x/Makefile | 4 ++-- arch/m68knommu/platform/523x/Makefile | 4 ++-- arch/m68knommu/platform/5249/Makefile | 4 ++-- arch/m68knommu/platform/5272/Makefile | 4 ++-- arch/m68knommu/platform/527x/Makefile | 4 ++-- arch/m68knommu/platform/528x/Makefile | 4 ++-- arch/m68knommu/platform/5307/Makefile | 4 ++-- arch/m68knommu/platform/532x/Makefile | 4 ++-- arch/m68knommu/platform/5407/Makefile | 4 ++-- arch/m68knommu/platform/coldfire/Makefile | 4 ++-- 12 files changed, 24 insertions(+), 24 deletions(-)
arch/m68knommu/platform/5206/Makefile +2 -2
@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
arch/m68knommu/platform/5206e/Makefile +2 -2
@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
arch/m68knommu/platform/520x/Makefile +2 -2
@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
arch/m68knommu/platform/523x/Makefile +2 -2
@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
arch/m68knommu/platform/5249/Makefile +2 -2
@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
arch/m68knommu/platform/5272/Makefile +2 -2
@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
arch/m68knommu/platform/527x/Makefile +2 -2
@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
arch/m68knommu/platform/528x/Makefile +2 -2
@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
arch/m68knommu/platform/5307/Makefile +2 -2
@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
arch/m68knommu/platform/532x/Makefile +2 -2
@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
arch/m68knommu/platform/5407/Makefile +2 -2
@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
arch/m68knommu/platform/coldfire/Makefile +2 -2
@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
Signature · 1 line
1.7.2.1
Hi Matt,
Quoted 3 lines · matt mooney
Replace
EXTRA_CFLAGSwith ccflags-y andEXTRA_AFLAGSwith asflags-y.Signed-off-by matt mooney<[email protected]>
Looks fine to me. Are you looking for this to go through maintainer trees, or the whole patch series in one go?
Regards
Greg
Quoted 195 lines
--- arch/m68knommu/platform/5206/Makefile | 4 ++-- arch/m68knommu/platform/5206e/Makefile | 4 ++-- arch/m68knommu/platform/520x/Makefile | 4 ++-- arch/m68knommu/platform/523x/Makefile | 4 ++-- arch/m68knommu/platform/5249/Makefile | 4 ++-- arch/m68knommu/platform/5272/Makefile | 4 ++-- arch/m68knommu/platform/527x/Makefile | 4 ++-- arch/m68knommu/platform/528x/Makefile | 4 ++-- arch/m68knommu/platform/5307/Makefile | 4 ++-- arch/m68knommu/platform/532x/Makefile | 4 ++-- arch/m68knommu/platform/5407/Makefile | 4 ++-- arch/m68knommu/platform/coldfire/Makefile | 4 ++-- 12 files changed, 24 insertions(+), 24 deletions(-)arch/m68knommu/platform/5206/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1arch/m68knommu/platform/5206e/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1arch/m68knommu/platform/520x/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1arch/m68knommu/platform/523x/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1arch/m68knommu/platform/5249/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1arch/m68knommu/platform/5272/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1arch/m68knommu/platform/527x/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1arch/m68knommu/platform/528x/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1arch/m68knommu/platform/5307/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1arch/m68knommu/platform/532x/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1arch/m68knommu/platform/5407/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1arch/m68knommu/platform/coldfire/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
Quoted 10 lines · Greg Ungerer
Hi Matt,
Quoted 3 lines · matt mooney
Replace
EXTRA_CFLAGSwith ccflags-y andEXTRA_AFLAGSwith asflags-y.Signed-off-by matt mooney<[email protected]>Looks fine to me. Are you looking for this to go through maintainer trees, or the whole patch series in one go?
Hi Greg,
My original intent was through the maintainer trees; however, I am starting to realize that it probably would have been best to all go into the kbuild tree as one patch series. That being said, some people have picked them up and others have just acked, so really whatever is easiest for you. All unapplied will eventually go through the kbuild tree.
Thanks,
mfm
Quoted 202 lines
Acked-by Greg Ungerer <[email protected]>Regards
GregQuoted 195 lines
--- arch/m68knommu/platform/5206/Makefile | 4 ++-- arch/m68knommu/platform/5206e/Makefile | 4 ++-- arch/m68knommu/platform/520x/Makefile | 4 ++-- arch/m68knommu/platform/523x/Makefile | 4 ++-- arch/m68knommu/platform/5249/Makefile | 4 ++-- arch/m68knommu/platform/5272/Makefile | 4 ++-- arch/m68knommu/platform/527x/Makefile | 4 ++-- arch/m68knommu/platform/528x/Makefile | 4 ++-- arch/m68knommu/platform/5307/Makefile | 4 ++-- arch/m68knommu/platform/532x/Makefile | 4 ++-- arch/m68knommu/platform/5407/Makefile | 4 ++-- arch/m68knommu/platform/coldfire/Makefile | 4 ++-- 12 files changed, 24 insertions(+), 24 deletions(-)arch/m68knommu/platform/5206/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1arch/m68knommu/platform/5206e/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1arch/m68knommu/platform/520x/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1arch/m68knommu/platform/523x/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1arch/m68knommu/platform/5249/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1arch/m68knommu/platform/5272/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1arch/m68knommu/platform/527x/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1arch/m68knommu/platform/528x/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1arch/m68knommu/platform/5307/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1arch/m68knommu/platform/532x/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1arch/m68knommu/platform/5407/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1arch/m68knommu/platform/coldfire/Makefile +2
-2@@ -8,8 +8,8 @@ # on the console port whenever a DBG interrupt occurs. You have to # set up you HW breakpoints to trigger a DBG interrupt: # -# EXTRA_CFLAGS += -DTRAP_DBG_INTERRUPT -# EXTRA_AFLAGS += -DTRAP_DBG_INTERRUPT +# ccflags-y := -DTRAP_DBG_INTERRUPT +# asflags-y := -DTRAP_DBG_INTERRUPT # asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
Hi Matt,
Quoted 12 lines · matt mooney
Quoted 10 lines · Greg Ungerer
Hi Matt,
Quoted 3 lines · matt mooney
Replace
EXTRA_CFLAGSwith ccflags-y andEXTRA_AFLAGSwith asflags-y.Signed-off-by matt mooney<[email protected]>Looks fine to me. Are you looking for this to go through maintainer trees, or the whole patch series in one go?
Quoted 7 lines
Hi Greg,
My original intent was through the maintainer trees; however, I am starting to realize that it probably would have been best to all go into the kbuild tree as one patch series. That being said, some people have picked them up and others have just acked, so really whatever is easiest for you. All unapplied will eventually go through the kbuild tree.
I am happy to pick up the m68knommu change and send up-stream.
Regards
Greg
Quoted 21 lines
Quoted 21 lines
Acked-by Greg Ungerer<[email protected]>Regards
GregQuoted 15 lines
--- arch/m68knommu/platform/5206/Makefile | 4 ++-- arch/m68knommu/platform/5206e/Makefile | 4 ++-- arch/m68knommu/platform/520x/Makefile | 4 ++-- arch/m68knommu/platform/523x/Makefile | 4 ++-- arch/m68knommu/platform/5249/Makefile | 4 ++-- arch/m68knommu/platform/5272/Makefile | 4 ++-- arch/m68knommu/platform/527x/Makefile | 4 ++-- arch/m68knommu/platform/528x/Makefile | 4 ++-- arch/m68knommu/platform/5307/Makefile | 4 ++-- arch/m68knommu/platform/532x/Makefile | 4 ++-- arch/m68knommu/platform/5407/Makefile | 4 ++-- arch/m68knommu/platform/coldfire/Makefile | 4 ++-- 12 files changed, 24 insertions(+), 24 deletions(-)
Quoted 5 lines · matt mooney
My original intent was through the maintainer trees; however, I am starting to realize that it probably would have been best to all go into the kbuild tree as one patch series. That being said, some people have picked them up and others have just acked, so really whatever is easiest for you. All unapplied will eventually go through the kbuild tree.
Please try push as much through maintainer trees as possible, to avoid unnecessary merge conflicts. Of course, if you end up with some patches that nobody is picking up, I'll apply them to the kbuild tree.
Thanks,
Michal
Quoted 10 lines · Michal Marek
Quoted 5 lines · matt mooney
My original intent was through the maintainer trees; however, I am starting to realize that it probably would have been best to all go into the kbuild tree as one patch series. That being said, some people have picked them up and others have just acked, so really whatever is easiest for you. All unapplied will eventually go through the kbuild tree.
Please try push as much through maintainer trees as possible, to avoid unnecessary merge conflicts. Of course, if you end up with some patches that nobody is picking up, I'll apply them to the kbuild tree.
Okay, if anybody else asks, I will definitely ask them kindly to pick them up. There are, however, some patches that will need to go through the kbuild tree because some maintainers have already acked the patches and not picked them up. I will wait a couple more weeks, and then I will resend to you and the kbuild list with all acks added.
-mfm
Quoted 4 lines · matt mooney
Okay, if anybody else asks, I will definitely ask them kindly to pick them up. There are, however, some patches that will need to go through the kbuild tree because some maintainers have already acked the patches and not picked them up.
You can ask them to apply the patches :).
I will wait a couple more weeks, and then I will resend to you and the
Quoted 1 line
kbuild list with all acks added.
OK.
Michal