myri10ge: DCA update (resubmit)
Subsystems (2)
PATCH 1/1 myri10ge: DCA update (resubmit)
This patch contains the following DCA improvements to myri10ge:
1) Finally move myri10ge to use dca3 API
2) Disable PCIe relaxed ordering when enabling DCA on myri10ge. This provides a performance boost on Nehalem based Xeons
3) Make sure to properly initialize NIC's DCA state when it is enabled, rather than giving the NIC a bogus tag (0) and waiting for the first received packet to trigger an update. Not using a real tag can cause hardware exceptions on some motherboards when a CPU socket is empty.
3) Always update the cached CPU when our interrupt affinity changes so as to avoid excessive calls to dca3_get_tag()
drivers/net/myri10ge/myri10ge.c +30 -4
@@ -225,6 +225,7 @@ struct myri10ge_priv {struct msix_entry *msix_vectors;#ifdef CONFIG_MYRI10GE_DCA int dca_enabled; +int relaxed_order;#endif u32 link_state;unsigned int rdma_tags_available;
@@ -1074,10 +1075,28 @@ static int myri10ge_reset(struct myri10ge_priv *mgp) }#ifdef CONFIG_MYRI10GE_DCA +static int myri10ge_toggle_relaxed (struct pci_dev *pdev,int on) +{ +int ret, cap, err; +u16 ctl; + + cap =pci_find_capability (pdev,PCI_CAP_ID_EXP ); +if (!cap) +return 0 ; + + err =pci_read_config_word (pdev, cap +PCI_EXP_DEVCTL , &ctl); + ret = (ctl &PCI_EXP_DEVCTL_RELAX_EN ) >>4 ; +if (ret != on) { + ctl &= ~PCI_EXP_DEVCTL_RELAX_EN ; + ctl |= (on <<4 ); +pci_write_config_word (pdev, cap +PCI_EXP_DEVCTL , ctl); + } +return ret; +} +static void myri10ge_write_dca (struct myri10ge_slice_state *ss,int cpu,int tag) { - ss->cpu = cpu; ss->cached_dca_tag = tag;put_be32 (htonl (tag), ss->dca_tag); }
@@ -1088,9 +1107,10 @@ static inline void myri10ge_update_dca(struct myri10ge_slice_state *ss)int tag;if (cpu != ss->cpu) { - tag =dca_get_tag (cpu); + tag =dca3_get_tag (&ss->mgp->pdev->dev, cpu);if (ss->cached_dca_tag != tag)myri10ge_write_dca (ss, cpu, tag); + ss->cpu = cpu; }put_cpu (); }
@@ -1113,9 +1133,13 @@ static void myri10ge_setup_dca(struct myri10ge_priv *mgp) "dca_add_requester() failed, err=%d\n", err);return ; } + mgp->relaxed_order =myri10ge_toggle_relaxed (pdev,0 ); mgp->dca_enabled =1 ; -for (i =0 ; i < mgp->num_slices; i++) -myri10ge_write_dca (&mgp->ss[i],-1 ,0 ); +for (i =0 ; i < mgp->num_slices; i++) { + mgp->ss[i].cpu =-1 ; + mgp->ss[i].cached_dca_tag =-1 ; +myri10ge_update_dca (&mgp->ss[i]); + } }static void myri10ge_teardown_dca (struct myri10ge_priv *mgp)
@@ -1126,6 +1150,8 @@ static void myri10ge_teardown_dca(struct myri10ge_priv *mgp)if (!mgp->dca_enabled)return ; mgp->dca_enabled =0 ; +if (mgp->relaxed_order) +myri10ge_toggle_relaxed (pdev,1 ); err =dca_remove_requester (&pdev->dev); }
From: Andrew Gallatin <[email protected]>
Date: Tue, 28 Sep 2010 14:13:12 -0400
Quoted 15 lines
This patch contains the following DCA improvements to myri10ge:
1) Finally move myri10ge to use dca3 API
2) Disable PCIe relaxed ordering when enabling DCA on myri10ge. This provides a performance boost on Nehalem based Xeons
3) Make sure to properly initialize NIC's DCA state when it is enabled,
rather than giving the NIC a bogus tag (0) and waiting for the first received packet to trigger an update. Not using a real tag can cause hardware exceptions on some motherboards when a CPU socket is empty.
Quoted 5 lines
3) Always update the cached CPU when our interrupt affinity changes so as to avoid excessive calls to
dca3_get_tag()Signed-off-by Andrew Gallatin <[email protected]>Signed-off-by Loic Prylli <[email protected]>
Applied.