ARM: S5PC110: Place the common SPARSEMEM at ARCH_S5PV210
Subsystems (3)
PATCH v2 1/3 ARM: S5PC110: Place the common SPARSEMEM at ARCH_S5PV210
From: Kyungmin Park <[email protected]>
In case of s5pc110 CPU. It uses the SPARSEMEM as default memory configuration. So move to ARCH_S5PV210 config.
Signed-off-by Kyungmin Park <[email protected]>
--- arch/arm/Kconfig | 1 + arch/arm/mach-s5pv210/Kconfig | 4 ---- 2 files changed, 1 insertions(+), 4 deletions(-)
arch/arm/Kconfig +1 -0
@@ -717,6 +717,7 @@ config ARCH_S5PC100 config ARCH_S5PV210 bool "Samsung S5PV210/S5PC110" select CPU_V7 + select ARCH_SPARSEMEM_ENABLE select GENERIC_GPIO select HAVE_CLK select ARM_L1_CACHE_SHIFT_6
arch/arm/mach-s5pv210/Kconfig +0 -4
@@ -63,7 +63,6 @@ menu "S5PC110 Machines" config MACH_AQUILA bool "Aquila" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_FB select S5P_DEV_FIMC0 select S5P_DEV_FIMC1
@@ -80,7 +79,6 @@ config MACH_AQUILA config MACH_GONI bool "GONI" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_FB select S5P_DEV_FIMC0 select S5P_DEV_FIMC1
@@ -98,7 +96,6 @@ config MACH_GONI config MACH_SMDKC110 bool "SMDKC110" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_I2C1 select S3C_DEV_I2C2 select S3C_DEV_RTC
@@ -118,7 +115,6 @@ menu "S5PV210 Machines" config MACH_SMDKV210 bool "SMDKV210" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2
Signature · 1 line
1.5.3.3
PATCH v2 1/3 ARM: S5PC110: Place the common SPARSEMEM at ARCH_S5PV210
Quoted 54 lines · Kyungmin Park
From: Kyungmin Park <[email protected]>
In case of s5pc110 CPU. It uses the SPARSEMEM as default memory configuration.
So move toARCH_S5PV210config.Signed-off-by Kyungmin Park <[email protected]>--- arch/arm/Kconfig | 1 + arch/arm/mach-s5pv210/Kconfig | 4 ---- 2 files changed, 1 insertions(+), 4 deletions(-)arch/arm/Kconfig +1
-0@@ -717,6 +717,7 @@ config ARCH_S5PC100 config ARCH_S5PV210 bool "Samsung S5PV210/S5PC110" select CPU_V7 + select ARCH_SPARSEMEM_ENABLE select GENERIC_GPIO select HAVE_CLK select ARM_L1_CACHE_SHIFT_6arch/arm/mach-s5pv210/Kconfig +0
-3@@ -63,7 +63,6 @@ menu "S5PC110 Machines" config MACH_AQUILA bool "Aquila" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_FB select S5P_DEV_FIMC0 select S5P_DEV_FIMC1@@ -80,7 +79,6 @@ config MACH_AQUILA config MACH_GONI bool "GONI" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_FB select S5P_DEV_FIMC0 select S5P_DEV_FIMC1@@ -98,7 +96,6 @@ config MACH_GONI config MACH_SMDKC110 bool "SMDKC110" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_I2C1 select S3C_DEV_I2C2 select S3C_DEV_RTC
arch/arm/mach-s5pv210/Kconfig menu "S5PV210 Machines"
Quoted 8 lines
arch/arm/mach-s5pv210/Kconfig +0
-2@@ -118,7 +115,6 @@ menu "S5PV210 Machines" config MACH_SMDKV210 bool "SMDKV210" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 --
Looks ok to me..will apply.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.