mfd: Add WM8325 support
Subsystems (2)
PATCH 1/1 mfd: Add WM8325 support
The WM8325 is a PMIC for low power, high performance applications. From a software point of view the device is identical to the WM8320, all the differences are at the hardware level.
Signed-off-by Mark Brown <[email protected]>
--- drivers/mfd/wm831x-core.c | 14 ++++++++++++++ 1 files changed, 14 insertions(+), 0 deletions(-)
drivers/mfd/wm831x-core.c +14 -0
@@ -96,6 +96,7 @@ enum wm831x_parent {WM8312 =0x8312 ,WM8320 =0x8320 ,WM8321 =0x8321 , + WM8325 = 0x8325, };static int wm831x_reg_locked (struct wm831x *wm831x,unsigned short reg)
@@ -1540,6 +1541,12 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq)dev_info (wm831x->dev,"WM8321 revision %c\n" ,'A' + rev);break ; +case WM8325 : + parent =WM8325 ; + wm831x->num_gpio =12 ; +dev_info (wm831x->dev,"WM8325 revision %c\n" ,'A' + rev); +break ; +default :dev_err (wm831x->dev,"Unknown WM831x device %04x\n" , ret); ret = -EINVAL ;
@@ -1620,6 +1627,12 @@ static int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) NULL, 0);break ; +case WM8325 : + ret =mfd_add_devices (wm831x->dev,-1 , + wm8320_devs,ARRAY_SIZE (wm8320_devs), +NULL ,0 ); +break ; +default :/* If this happens the bus probe function is buggy */ BUG ();
@@ -1791,6 +1804,7 @@ static const struct i2c_device_id wm831x_i2c_id[] = { { "wm8312", WM8312 }, { "wm8320", WM8320 }, { "wm8321", WM8321 }, + { "wm8325", WM8325 }, { } };MODULE_DEVICE_TABLE (i2c, wm831x_i2c_id);
Signature · 1 line
1.7.1
Hi Mark,
Quoted 3 lines · Mark Brown
The WM8325 is a PMIC for low power, high performance applications. From a software point of view the device is identical to the WM8320, all the differences are at the hardware level.
Thanks, patch applied.
Cheers,
Samuel.
Signature · 2 lines
Intel Open Source Technology Centre http://oss.intel.com/