Skip to contentSkip to conversation

omap3: Add minimal OMAP3 IGEP module support.

PATCH New Enric Balletbo i Serra 2 participants 3 messages Oct 1, 2010 – Oct 2, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 omap3: Add minimal OMAP3 IGEP module support.

The OMAP3 IGEP module is a low-power, high performance production-ready system-on-module (SOM) based on TI's OMAP3 family.

---
 arch/arm/mach-omap2/Kconfig          |    5 +
 arch/arm/mach-omap2/Makefile         |    2 +
 arch/arm/mach-omap2/board-igep0030.c |  412 ++++++++++++++++++++++++++++++++++
 3 files changed, 419 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-omap2/board-igep0030.c
arch/arm/mach-omap2/Kconfig +5 -0
index b48bacf..233bfbe 100644
@@ -220,6 +220,11 @@ config MACH_IGEP0020
 	default y
 	select OMAP_PACKAGE_CBB
 
+config MACH_IGEP0030
+	bool "IGEP OMAP3 module"
+	depends on ARCH_OMAP3
+	select OMAP_PACKAGE_CBB
+
 config MACH_SBC3530
 	bool "OMAP3 SBC STALKER board"
 	depends on ARCH_OMAP3
arch/arm/mach-omap2/Makefile +2 -0
index 88d3a1e..71386d4 100644
@@ -148,6 +148,8 @@ obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o \
 					   hsmmc.o
+obj-$(CONFIG_MACH_IGEP0030)		+= board-igep0030.o \
+					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o \
 					   hsmmc.o
 obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o \
arch/arm/mach-omap2/board-igep0030.c new file +412 -0

412 lines not on this page · raw message

Signature · 1 line
1.7.0.4
maintainer
#1 lore raw

PATCH 1/1 omap3: Add minimal OMAP3 IGEP module support.

Quoted 2 lines · Enric Balletbo i Serra

The OMAP3 IGEP module is a low-power, high performance production-ready system-on-module (SOM) based on TI's OMAP3 family.

Looks OK to me, but also looks like you're missing the uncompress.h DEBUG_LL/EARLY_PRINTK entry?

Regards,

Tony

#2 lore raw

PATCH 1/1 omap3: Add minimal OMAP3 IGEP module support.

2010/10/2 Tony Lindgren <[email protected]>:

Quoted 7 lines · Enric Balletbo i Serra
Quoted 2 lines

The OMAP3 IGEP module is a low-power, high performance production-ready system-on-module (SOM) based on TI's OMAP3 family.

Looks OK to me, but also looks like you're missing the uncompress.h DEBUG_LL/EARLY_PRINTK entry?

Mmmm, I see I missed I'll send the version two...

I'm learning a lot, thanks for your patience :-)

Kind regards,

Enric