New Broadcom chip in W510

DISCUSSION Lu Ran 1 participant 1 message Oct 5, 2010 Bluetooth drivers

lore

Share & tools

lore

Lu Ran

author

2010-10-05 12:59 UTC #0 lore raw

Hi,

Quoted 8 lines · On Tuesday 05 October 2010 08:13:59 you wrote:

Quoted 4 lines
I put the output ot "cat /proc/bus/usb/devices" in the attachment, I am pretty sure the setup of my software is OK, because now I can use my bluetooth headset with an dongle, but it does not work for the internal chip.
maybe that hardware has some limitations that are unclear to me. Can you run hcidump -X -V and give us the output when trying to establish a SCO connection.

Here is the output of hcidump. This issue might be related to the usb code, when I test the dongle, it gives the same error when I connect it through a usb3 port, it only works with usb2 port, but for the internal broadcom chip, nothing changes even when I remove the xhci_hcd module.

Signature · 2 lines

Best Regards,
LR

HCI sniffer - Bluetooth packet analyzer ver 1.42
device: hci0 snap_len: 1028 filter: 0xffffffffffffffff

Quoted 1 line

HCI Event: Connect Request (0x04) plen 10

    bdaddr 00:19:7F:D8:6A:C3 class 0x200404 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
    bdaddr 00:19:7F:D8:6A:C3 role 0x00
    Role: Master

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4

    Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1

Quoted 1 line

HCI Event: Role Change (0x12) plen 8

    status 0x00 bdaddr 00:19:7F:D8:6A:C3 role 0x00
    Role: Master

Quoted 1 line

HCI Event: Link Key Request (0x17) plen 6

    bdaddr 00:19:7F:D8:6A:C3
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
    bdaddr 00:19:7F:D8:6A:C3 key 9741E3A1976D406A2667C8926C02BDBE

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 10

    Link Key Request Reply (0x01|0x000b) ncmd 1
    status 0x00 bdaddr 00:19:7F:D8:6A:C3

Quoted 1 line

HCI Event: Connect Complete (0x03) plen 11

    status 0x00 handle 11 bdaddr 00:19:7F:D8:6A:C3 type ACL encrypt 0x01

< HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2
handle 11

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4

    Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1

Quoted 1 line

HCI Event: Read Remote Supported Features (0x0b) plen 11

    status 0x00 handle 11
    Features: 0xbc 0xe8 0x01 0x00 0x08 0x08 0x00 0x00

Quoted 1 line

ACL data: handle 11 flags 0x02 dlen 12

    L2CAP(s): Connect req: psm 1 scid 0x0040

< ACL data: handle 11 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 1 status 0
Connection pending - No futher information available
< ACL data: handle 11 flags 0x02 dlen 10
L2CAP(s): Info req: type 2

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 11 packets 2

Quoted 1 line

ACL data: handle 11 flags 0x02 dlen 16

L2CAP(s): Info rsp: type 2 result 0
Extended feature mask 0x0000
< ACL data: handle 11 flags 0x02 dlen 16

    L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
      Connection successful
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
    bdaddr 00:19:7F:D8:6A:C3 mode 2 clkoffset 0x0000

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4

    Remote Name Request (0x01|0x0019) status 0x00 ncmd 1

Quoted 1 line

ACL data: handle 11 flags 0x02 dlen 16

    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
      MTU 48 
< ACL data: handle 11 flags 0x02 dlen 18
    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 4
      MTU 48 
< ACL data: handle 11 flags 0x02 dlen 12
    L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 11 packets 2

Quoted 1 line

ACL data: handle 11 flags 0x02 dlen 14

    L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
      Success

Quoted 1 line

HCI Event: Remote Name Req Complete (0x07) plen 255

    status 0x00 bdaddr 00:19:7F:D8:6A:C3 name 'ATT V521'

Quoted 1 line

ACL data: handle 11 flags 0x02 dlen 19

    L2CAP(d): cid 0x0040 len 15 [psm 1]
        SDP SS Req: tid 0x1 len 0xa
          pat uuid-32 0x111f (Handsfree AG)
          max 40
          cont 00
< ACL data: handle 11 flags 0x02 dlen 18
    L2CAP(d): cid 0x0040 len 14 [psm 1]
        SDP SS Rsp: tid 0x1 len 0x9
          count 1
          handle 0x10001
          cont 00

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 11 packets 2

Quoted 1 line

ACL data: handle 11 flags 0x02 dlen 21

    L2CAP(d): cid 0x0040 len 17 [psm 1]
        SDP SA Req: tid 0x2 len 0xc
          handle 0x10001
          max 38
          aid(s) 0x0004 (ProtocolDescList)
          cont 00
< ACL data: handle 11 flags 0x02 dlen 31
    L2CAP(d): cid 0x0040 len 27 [psm 1]
        SDP SA Rsp: tid 0x2 len 0x16
          count 19
          aid 0x0004 (ProtocolDescList)
             < < uuid-16 0x0100 (L2CAP) > <
             uuid-16 0x0003 (RFCOMM) uint 0xd > >
          cont 00

Quoted 1 line

ACL data: handle 11 flags 0x02 dlen 12

    L2CAP(s): Connect req: psm 3 scid 0x0041
< ACL data: handle 11 flags 0x02 dlen 16
    L2CAP(s): Connect rsp: dcid 0x0041 scid 0x0041 result 0 status 0
      Connection successful

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 11 packets 2

Quoted 1 line

ACL data: handle 11 flags 0x02 dlen 16

    L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 4
      MTU 132 
< ACL data: handle 11 flags 0x02 dlen 18
    L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 4
      MTU 132 
< ACL data: handle 11 flags 0x02 dlen 16
    L2CAP(s): Config req: dcid 0x0041 flags 0x00 clen 4
      MTU 1013

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 11 packets 2

Quoted 1 line

ACL data: handle 11 flags 0x02 dlen 18

    L2CAP(s): Config rsp: scid 0x0041 flags 0x00 result 0 clen 4
      MTU 1013

Quoted 1 line

ACL data: handle 11 flags 0x02 dlen 8

    L2CAP(d): cid 0x0041 len 4 [psm 3]
      RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c 
< ACL data: handle 11 flags 0x02 dlen 8
    L2CAP(d): cid 0x0041 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7

Quoted 1 line

ACL data: handle 11 flags 0x02 dlen 18

L2CAP(d): cid 0x0041 len 14 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8 dlci 26 frame_type 0 credit_flow 15 pri 0 ack_timer 0 frame_size 126 max_retrans 0 credits 0
< ACL data: handle 11 flags 0x02 dlen 18
L2CAP(d): cid 0x0041 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8 dlci 26 frame_type 0 credit_flow 14 pri 0 ack_timer 0 frame_size 126 max_retrans 0 credits 7

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 11 packets 2

Quoted 1 line

ACL data: handle 11 flags 0x02 dlen 8

    L2CAP(d): cid 0x0041 len 4 [psm 3]
      RFCOMM(s): SABM: cr 1 dlci 26 pf 1 ilen 0 fcs 0xe7

< HCI Command: Authentication Requested (0x01|0x0011) plen 2
handle 11

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4

    Authentication Requested (0x01|0x0011) status 0x00 ncmd 1

Quoted 1 line

HCI Event: Link Key Request (0x17) plen 6

    bdaddr 00:19:7F:D8:6A:C3
< HCI Command: Link Key Request Reply (0x01|0x000b) plen 22
    bdaddr 00:19:7F:D8:6A:C3 key 9741E3A1976D406A2667C8926C02BDBE

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 10

    Link Key Request Reply (0x01|0x000b) ncmd 1
    status 0x00 bdaddr 00:19:7F:D8:6A:C3

Quoted 1 line

HCI Event: Auth Complete (0x06) plen 3

    status 0x00 handle 11
< HCI Command: Set Connection Encryption (0x01|0x0013) plen 3
    handle 11 encrypt 0x01

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4

    Set Connection Encryption (0x01|0x0013) status 0x00 ncmd 1

Quoted 1 line

HCI Event: Encrypt Change (0x08) plen 4

    status 0x00 handle 11 encrypt 0x01
< ACL data: handle 11 flags 0x02 dlen 8
    L2CAP(d): cid 0x0041 len 4 [psm 3]
      RFCOMM(s): UA: cr 1 dlci 26 pf 1 ilen 0 fcs 0x2c 
< ACL data: handle 11 flags 0x02 dlen 12
    L2CAP(d): cid 0x0041 len 8 [psm 3]
      RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
      dlci 26 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 0 b3 0 len 9

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 11 packets 2

Quoted 1 line

ACL data: handle 11 flags 0x02 dlen 12

    L2CAP(d): cid 0x0041 len 8 [psm 3]
      RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
      dlci 26 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 0 b3 0 len 9

Quoted 1 line

ACL data: handle 11 flags 0x02 dlen 12

    L2CAP(d): cid 0x0041 len 8 [psm 3]
      RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
      dlci 26 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 1 b2 0 b3 0 len 9
< ACL data: handle 11 flags 0x02 dlen 12
    L2CAP(d): cid 0x0041 len 8 [psm 3]
      RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
      dlci 26 fc 0 rtc 1 rtr 1 ic 0 dv 0 b1 1 b2 0 b3 0 len 9
< ACL data: handle 11 flags 0x02 dlen 9
    L2CAP(d): cid 0x0041 len 5 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 1 ilen 0 fcs 0x22 credits 33

Quoted 1 line

ACL data: handle 11 flags 0x02 dlen 9

    L2CAP(d): cid 0x0041 len 5 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 1 ilen 0 fcs 0xf8 credits 15

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 11 packets 2

Quoted 1 line

ACL data: handle 11 flags 0x02 dlen 12

    L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 11 flags 0x02 dlen 12
    L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 11 packets 1

Quoted 1 line

ACL data: handle 11 flags 0x02 dlen 19

    L2CAP(d): cid 0x0041 len 15 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 0 ilen 11 fcs 0xe4 
      0000: 41 54 2b 42 52 53 46 3d  32 34 0d                 AT+BRSF=24.
< ACL data: handle 11 flags 0x02 dlen 22
    L2CAP(d): cid 0x0041 len 18 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 14 fcs 0x3e 
      0000: 0d 0a 2b 42 52 53 46 3a  20 33 35 32 0d 0a        ..+BRSF: 352..
< ACL data: handle 11 flags 0x02 dlen 14
    L2CAP(d): cid 0x0041 len 10 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 6 fcs 0x3e 
      0000: 0d 0a 4f 4b 0d 0a                                 ..OK..

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 11 packets 2

Quoted 1 line

ACL data: handle 11 flags 0x02 dlen 19

    L2CAP(d): cid 0x0041 len 15 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 1 ilen 10 fcs 0xf8 credits 2
      0000: 41 54 2b 43 49 4e 44 3d  3f 0d                    AT+CIND=?.
< ACL data: handle 11 flags 0x02 dlen 134
    L2CAP(d): cid 0x0041 len 130 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 126 fcs 0x3e 
      0000: 0d 0a 2b 43 49 4e 44 3a  20 28 22 62 61 74 74 63  ..+CIND: ("battc
      0010: 68 67 22 2c 28 30 2d 35  29 29 2c 28 22 73 69 67  hg",(0-5)),("sig
      0020: 6e 61 6c 22 2c 28 30 2d  35 29 29 2c 28 22 73 65  nal",(0-5)),("se
      0030: 72 76 69 63 65 22 2c 28  30 2c 31 29 29 2c 28 22  rvice",(0,1)),("
      0040: 63 61 6c 6c 22 2c 28 30  2c 31 29 29 2c 28 22 63  call",(0,1)),("c
      0050: 61 6c 6c 73 65 74 75 70  22 2c 28 30 2d 33 29 29  allsetup",(0-3))
      0060: 2c 28 22 63 61 6c 6c 68  65 6c 64 22 2c 28 30 2d  ,("callheld",(0-
      0070: 32 29 29 2c 28 22 72 6f  61 6d 22 2c 28 30        2)),("roam",(0
< ACL data: handle 11 flags 0x02 dlen 14
    L2CAP(d): cid 0x0041 len 10 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 6 fcs 0x3e 
      0000: 2c 31 29 29 0d 0a                                 ,1))..
< ACL data: handle 11 flags 0x02 dlen 14
    L2CAP(d): cid 0x0041 len 10 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 6 fcs 0x3e 
      0000: 0d 0a 4f 4b 0d 0a                                 ..OK..

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 11 packets 2

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 11 packets 1

Quoted 1 line

ACL data: handle 11 flags 0x02 dlen 18

    L2CAP(d): cid 0x0041 len 14 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 1 ilen 9 fcs 0xf8 credits 2
      0000: 41 54 2b 43 49 4e 44 3f  0d                       AT+CIND?.
< ACL data: handle 11 flags 0x02 dlen 32
    L2CAP(d): cid 0x0041 len 28 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 24 fcs 0x3e 
      0000: 0d 0a 2b 43 49 4e 44 3a  20 35 2c 35 2c 31 2c 30  ..+CIND: 5,5,1,0
      0010: 2c 30 2c 30 2c 30 0d 0a                           ,0,0,0..
< ACL data: handle 11 flags 0x02 dlen 14
    L2CAP(d): cid 0x0041 len 10 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 6 fcs 0x3e 
      0000: 0d 0a 4f 4b 0d 0a                                 ..OK..

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 11 packets 2

Quoted 2 lines

ACL data: handle 11 flags 0x02 dlen 27
ACL data: handle 11 flags 0x01 dlen 1

    L2CAP(d): cid 0x0041 len 24 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 1 ilen 19 fcs 0xf8 credits 2
      0000: 41 54 2b 43 4d 45 52 3d  33 2c 20 30 2c 20 30 2c  AT+CMER=3, 0, 0,
      0010: 20 31 0d                                           1.
< ACL data: handle 11 flags 0x02 dlen 14
    L2CAP(d): cid 0x0041 len 10 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 6 fcs 0x3e 
      0000: 0d 0a 4f 4b 0d 0a                                 ..OK..

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 11 packets 1

Quoted 1 line

ACL data: handle 11 flags 0x02 dlen 19

    L2CAP(d): cid 0x0041 len 15 [psm 3]
      RFCOMM(d): UIH: cr 1 dlci 26 pf 1 ilen 10 fcs 0xf8 credits 2
      0000: 41 54 2b 56 47 53 3d 31  35 0d                    AT+VGS=15.
< ACL data: handle 11 flags 0x02 dlen 14
    L2CAP(d): cid 0x0041 len 10 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 6 fcs 0x3e 
      0000: 0d 0a 4f 4b 0d 0a                                 ..OK..

Quoted 1 line

HCI Event: Number of Completed Packets (0x13) plen 5

handle 11 packets 1

Quoted 1 line

HCI Event: Encrypt Change (0x08) plen 4

    status 0x00 handle 11 encrypt 0x00

Quoted 1 line

HCI Event: Role Change (0x12) plen 8

    status 0x00 bdaddr 00:19:7F:D8:6A:C3 role 0x01
    Role: Slave

Quoted 1 line

HCI Event: Encrypt Change (0x08) plen 4

    status 0x00 handle 11 encrypt 0x01
< HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17
    handle 11 voice setting 0x0060

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4

    Setup Synchronous Connection (0x01|0x0028) status 0x00 ncmd 1

Quoted 1 line

HCI Event: Synchronous Connect Complete (0x2c) plen 17

status 0x00 handle 1 bdaddr 00:19:7F:D8:6A:C3 type SCO Air mode: CVSD
< ACL data: handle 11 flags 0x02 dlen 19

    L2CAP(d): cid 0x0041 len 15 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 11 fcs 0x3e 
      0000: 0d 0a 2b 56 47 53 3d 31  35 0d 0a                 ..+VGS=15..
< ACL data: handle 11 flags 0x02 dlen 18
    L2CAP(d): cid 0x0041 len 14 [psm 3]
      RFCOMM(d): UIH: cr 0 dlci 26 pf 0 ilen 10 fcs 0x3e 
      0000: 0d 0a 2b 56 47 4d 3d 30  0d 0a                    ..+VGM=0..
< SCO data: handle 1 flags 0x00 dlen 48
    0000: 07 00 fb ff 04 00 fa ff  01 00 fb ff 04 00 fb ff  ................
    0010: 02 00 fb ff 05 00 fa ff  03 00 fd ff 02 00 fc ff  ................
    0020: 03 00 fb ff 05 00 fa ff  05 00 fa ff 06 00 fa ff  ................
< SCO data: handle 1 flags 0x00 dlen 48
    0000: 04 00 fc ff 05 00 f9 ff  07 00 fb ff 05 00 fc ff  ................
    0010: 05 00 fc ff 07 00 f7 ff  08 00 fd ff 06 00 fb ff  ................
    0020: 07 00 f8 ff 07 00 f9 ff  09 00 f8 ff 07 00 fa ff  ................
< SCO data: handle 1 flags 0x00 dlen 48
    0000: 09 00 f9 ff 06 00 f6 ff  0b 00 fa ff 07 00 f6 ff  ................
    0010: 09 00 f4 ff 07 00 f7 ff  0b 00 f4 ff 0b 00 f5 ff  ................
    0020: 0a 00 f1 ff 0e 00 f4 ff  0f 00 f6 ff 11 00 f2 ff  ................
< SCO data: handle 1 flags 0x00 dlen 48
    0000: 13 00 f1 ff 17 00 eb ff  1e 00 eb ff 25 00 d9 ff  ............%...
    0010: 52 00 b4 00 1e 01 43 00  a8 ff 1d fe 53 01 76 ff  R.....C.....S.v.
    0020: 37 fe e4 00 a7 fd bb 00  4e ff 4a 01 8b ff 93 01  7.......N.J.....
< SCO data: handle 1 flags 0x00 dlen 48
    0000: fa fc 73 ff 04 05 cd 00  27 fc 25 ff 03 01 d9 00  ..s.....'.%.....
    0010: cb 03 c0 00 1b fe 83 ff  5b ff d4 fc 12 03 53 fe  ........[.....S.
    0020: 30 fd c9 fd 40 04 d0 01  95 02 e0 fa 53 00 63 04  [email protected].
< SCO data: handle 1 flags 0x00 dlen 48
    0000: 81 d5 87 d9 a4 de 31 e5  5a eb 2e f2 2d fa b5 01  ......1.Z...-...
    0010: 68 08 b4 0f ae 16 01 1c  c0 20 f3 24 16 27 a9 27  h........ .$.'.'
    0020: 25 28 0f 27 0e 23 98 1e  c1 19 14 13 83 0b 05 04  %(.'.#..........

< HCI Command: Disconnect (0x01|0x0006) plen 3
handle 1 reason 0x13
Reason: Remote User Terminated Connection

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4

    Disconnect (0x01|0x0006) status 0x00 ncmd 1

Quoted 1 line

HCI Event: Disconn Complete (0x05) plen 4

status 0x00 handle 1 reason 0x16
Reason: Connection Terminated by Local Host