Fix define for MPC5121 ADS board.
PATCH 1/1 Fix define for MPC5121 ADS board.
Originally the Makefile defines CONFIG_ADS5121_REV2 when configuring for board mpc5121ads_rev2. The config in include/configs/mpc5121ads.h expects a define CONFIG_MPC5121ADS_REV2 for this.
Therefore there are two defines used but only 1 is defined.
This patch renames references to CONFIG_ADS5121_REV2 to CONFIG_MPC5121ADS_REV2 to have one common define.
This patch fixes faulty mem size detection caused by wrong config in include/configs/mpc5121ads.h
--- Makefile | 2 +- board/freescale/mpc5121ads/mpc5121ads.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
Makefile +1 -1
@@ -700,7 +700,7 @@ mpc5121ads_rev2_config \ : unconfig @mkdir -p $(obj)include @if [ "$(findstring rev2,$@)" ] ; then \ - echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \ + echo "#define CONFIG_MPC5121ADS_REV2 1" > $(obj)include/config.h; \ fi @$(MKCONFIG) -n $@ -a mpc5121ads powerpc mpc512x mpc5121ads freescale
board/freescale/mpc5121ads/mpc5121ads.c +2 -2
@@ -102,7 +102,7 @@ int board_early_init_f(void)* write commands in order to establish the device ID. */ -#ifdef CONFIG_ADS5121_REV2 +#ifdef CONFIG_MPC5121ADS_REV2 out_8 ((u8 *)(CONFIG_SYS_CPLD_BASE +0x08 ),0xC1 );#else if (in_8 ((u8 *)(CONFIG_SYS_CPLD_BASE +0x08 )) &0x04 ) {
@@ -329,7 +329,7 @@ int checkboard (void)volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR ;u32 spridr =in_be32 (&im->sysconf.spridr); -printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n" , +printf ("Board: MPC5121ADS rev. 0x%04x (CPLD rev. 0x%02x)\n" , brd_rev, cpld_rev);/* initialize function mux & slew rate IO inter alia on IO Pins */
Signature · 1 line
1.7.0.4
PATCH 1/1 Fix define for MPC5121 ADS board.
Dear mark.vels at team-embedded.nl,
Quoted 9 lines · In message <[email protected]> you…
Originally the
MakefiledefinesCONFIG_ADS5121_REV2when configuring for boardmpc5121ads_rev2. The config ininclude/configs/mpc5121ads.hexpects a defineCONFIG_MPC5121ADS_REV2for this.
Therefore there are two defines used but only 1 is defined.
This patch renames references toCONFIG_ADS5121_REV2toCONFIG_MPC5121ADS_REV2to have one common define.This patch fixes faulty mem size detection caused by wrong config in
include/configs/mpc5121ads.h
Thanks. But... should we not rather drop that code completely? I guess the number of remaining Rev. 2 boards should be epsilon. Do you think these veterans are still in use anywhere?
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Brain fried - Core dumped
PATCH 1/1 Fix define for MPC5121 ADS board.
Dear Wolfgang,
Quoted 10 lines · Wolfgang Denk
Dear mark.vels at team-embedded.nl,
Quoted 7 lines · In message <[email protected]> you…
Originally the
MakefiledefinesCONFIG_ADS5121_REV2when configuring for boardmpc5121ads_rev2. The config ininclude/configs/mpc5121ads.hexpects a defineCONFIG_MPC5121ADS_REV2for this.
Therefore there are two defines used but only 1 is defined.
This patch renames references toCONFIG_ADS5121_REV2toCONFIG_MPC5121ADS_REV2to have one common define.
Quoted 6 lines
Quoted 2 lines
This patch fixes faulty mem size detection caused by wrong config in
include/configs/mpc5121ads.hThanks. But... should we not rather drop that code completely? I guess the number of remaining Rev. 2 boards should be epsilon. Do you think these veterans are still in use anywhere?
Hehe, well there is at least the one rev 2 board that I got from the customer on my desk at the moment. That's why I tried to build and execute this config.
I really can't tell if there are many more around so I'd like to leave it up to the experts if it is necessary to keep the code in. I am really glad though that it still is right now because it would have costed me a considerable amount of time to figure out the differences between the different revs.
Best regards,
Mark
PATCH 1/1 Fix define for MPC5121 ADS board.
Dear Mark Vels,
Quoted 3 lines · In message <[email protected]> you wrote:
Hehe, well there is at least the one rev 2 board that I got from the customer on my desk at the moment. That's why I tried to build and execute this config.
OK. What you have is an obvious bug fix. It does not hurt others (at least not more than the existing code), and is useful to you. So it may go in...
Best regards,
Wolfgang Denk
Signature · 3 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Quoted 1 line
Is there a way to determine Yesterday's date using Unix utilities?
echo "what is yesterday's date?" | /bin/mail root -- Randal L. Schwartz in <[email protected]>
Wolfgang Denk
AppliedPATCH 1/1 Fix define for MPC5121 ADS board.
In reply to mark.vels at team-embedded.nlDear mark.vels at team-embedded.nl,
Quoted 7 lines · In message <[email protected]> you…
Originally the
MakefiledefinesCONFIG_ADS5121_REV2when configuring for boardmpc5121ads_rev2. The config ininclude/configs/mpc5121ads.hexpects a defineCONFIG_MPC5121ADS_REV2for this.
Therefore there are two defines used but only 1 is defined.
This patch renames references toCONFIG_ADS5121_REV2toCONFIG_MPC5121ADS_REV2to have one common define.
Quoted 8 lines
This patch fixes faulty mem size detection caused by wrong config in
include/configs/mpc5121ads.hSigned-off-by Mark Vels <[email protected]>--- Makefile | 2 +- board/freescale/mpc5121ads/mpc5121ads.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-)
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de It became apparent that one reason why the Ice Giants were known as the Ice Giants was because they were, well, giants. The other was that they were made of ice. -Terry Pratchett, _Sourcery_