xfsdocs-xml: fix various formatting errors

Fix up a few formatting errors pointed out by Turbo Fredriksson, and while at it also remove various non-ASCII characters that sneaked in during the initial conversion

Reported-by Turbo Fredriksson <[email protected]>

Signed-off-by Christoph Hellwig <[email protected]>

Index: xfsdocs-xml-dev/XFS_User_Guide/en-US/XFS-allocators.xml
===================================================================

XFS_User_Guide/en-US/XFS-allocators.xml +2 -1

@@ -21,7 +21,8 @@
 		<para>Watch the inode numbers as directory inodes are created:</para>
 		<para><programlisting>
 > mkdir a b
-> ls -li total 0
+> ls -li
+total 0
      131 drwxr-xr-x 2 sjv users 6 2006-10-20 12:12 a
 33554624 drwxr-xr-x 2 sjv users 6 2006-10-20 12:12 b</programlisting></para>
 	</section>

Index: xfsdocs-xml-dev/XFS_User_Guide/en-US/XFS-monitoring.xml
===================================================================

XFS_User_Guide/en-US/XFS-monitoring.xml +10 -10

@@ -41,7 +41,7 @@ ig_found		# of times inode found in memo
 ig_frecycle		# of fails because inode was busy 
 ig_misses		# of times had to go to disk for inode 
 ig_dup			# times missed but found from another
-ig_reclaims		# of times recyled the inode’s memory 
+ig_reclaims		# of times recyled the inode's memory
 ig_attrchngx		# of times changed inode attributes 
 iflush_count		# of times inodes are being flushed 
 icluster_flushcnt	# of times inodes clustered

@@ -54,16 +54,16 @@ icluster_flushinode	# of times not able
 lookup			# of file name directory lookups 
 create			# of directory entry creations 
 remove			# of directory entry removes 
-getdents		# of “getdent” operations</programlisting></para>
+getdents		# of "getdents" operations</programlisting></para>
 	</section>
 
 	<section>
 		<title>PCP File Attribute Metrics</title>
 		<para><programlisting>
-attr.get		# of “get” operations		
-attr.set		# of “set” operations
-attr.remove		# of “remove” operations
-attr.list		# of “list” operations</programlisting></para>
+attr.get		# of "get" operations
+attr.set		# of "set" operations
+attr.remove		# of "remove" operations
+attr.list		# of "list" operations</programlisting></para>
 	</section>
 
 	<section>

@@ -84,7 +84,7 @@ alloc_btree.delrec	# of extent record de
 		<para><programlisting>
 block_map.read_ops	# of block map reads
 block_map.write_ops	# of block map writes
-block_map.unmap	# of block delete operations
+block_map.unmap		# of block delete operations
 block_map.add_exlist 	# of extent list insertions for files
 block_map.del_exlist	# of extent list deletions
 block_map.look_exlist	# of extent list lookups

@@ -98,7 +98,7 @@ bmap_btree.delrec	# of block map deletio
 	<section>
 		<title>PCP Journaling Metrics</title>
 		<para><programlisting>
-transaction.sync		# of transactions waiting to be committed
+transaction.sync	# of transactions waiting to be committed
 transaction.async	# of async transactions waiting
 transaction.empty	# of transactions that did not do anything
 log.writes		# of log buffer writes

@@ -113,7 +113,7 @@ log.force_sleep		# of calls to xs_log_fo
 		<para><programlisting>
 push_ail.pushes		# of times the AIL is moved forward
 push_ail.success	# of times sucessful
-push_ail.pushbuf	# of times inode locked – pushbuf called
+push_ail.pushbuf	# of times locked "pushbuf" called
 push_ail.pinned		# of times pinned
 push_ail.locked		# of times locked
 push_ail.flushing	# of times ail was flushing

@@ -125,7 +125,7 @@ push_ail.flush		# of times a log was for
 		<title>PCP Quota Metrics</title>
 		<para><programlisting>
 reclaims		# of disk quota reclaims
-reclaims_misses	# of disk quota reclaim misses
+reclaims_misses		# of disk quota reclaim misses
 dquot_dups		# of duplicates
 cachemisses		# of times disk quota misses cache
 cachehits		# of times disk quota in cache

Index: xfsdocs-xml-dev/XFS_User_Guide/en-US/XFS-repair.xml
===================================================================

XFS_User_Guide/en-US/XFS-repair.xml +15 -15

@@ -5,7 +5,7 @@
 	<title>XFS Repair</title>
 	<section>
 		<title>Filesystems can be corrupted by</title>
-		<para>• Filesystems can be corrupted by</para>
+		<para>Filesystems can be corrupted by</para>
 		<itemizedlist>
 		<listitem><para>Hardware Errors
 			<itemizedlist>

@@ -15,7 +15,7 @@
 		</para></listitem>
 		<listitem><para>To a much lesser degree, bugs in the filesystem</para></listitem>
 		</itemizedlist>
-		<para>Filesystems are able to “repair” themselves since they consist of lists, links 
+		<para>Filesystems are able to repair themselves since they consist of lists, links
 		      and reference counts that can be validated</para>
 		<itemizedlist>
 		<listitem><para>But not all information is always recovered, inodes that do not have a 

@@ -43,17 +43,17 @@
 		<para>xfs_repair uses libxfs which is a partial port of the XFS kernel code to user-space.</para>
 	</section>
 	<section>
-		<title>xfs_repair – Phase 1</title>
+		<title>xfs_repair - Phase 1</title>
 		<para>Find, verify and fix superblocks.</para>
 		<para>If a superblock is not found, xfs_repair will stop.</para>
 		<para>Sets up a virtual mount structure for the common XFS code base (libxfs) to work from.</para>
 	</section>
 	<section>
-		<title>xfs_repair – Phase 2</title>
+		<title>xfs_repair - Phase 2</title>
 		<para>Checks the AG header structures (AGI, AGF and AGFL) and scans the AGF and AGI btrees.</para>
 	</section>
 	<section>
-		<title>xfs_repair – Phase 3</title>
+		<title>xfs_repair - Phase 3</title>
 		<para>Using the AGI btree from phase2, scan the inode tree, processing the unlinked list for 
 		      deleted inodes and finding possible missing inode clusters.</para>
 		<para>Walk all the found inodes, recording used filesytem blocks (extents).</para>

@@ -61,17 +61,17 @@
 		<para>Any bad inodes are trashed including unrecoverable corrupted directories.</para>
 	</section>
 	<section>
-		<title>xfs_repair – Phase 4</title>
+		<title>xfs_repair - Phase 4</title>
 		<para>Scan inode extents again. Any inode with an extent covering used data is trashed.</para>
 	</section>
 	<section>
-		<title>xfs_repair – Phase 5</title>
+		<title>xfs_repair - Phase 5</title>
 		<para>Rebuild AG headers and structures including the AGI btree, AGF btrees and AGFL 
 		      regardless whether any errors have been found or not.</para>
 		<para>Realtime inodes are also reconstructed.</para>
 	</section>
 	<section>
-		<title>xfs_repair – Phase 6</title>
+		<title>xfs_repair - Phase 6</title>
 		<para>At this stage, the filesytem is in a mountable state.</para>
 		<para>Scan the directories analysing all data.</para>
 		<itemizedlist>

@@ -82,12 +82,12 @@
 		<para>At the end, any unreached inodes are put into lost+found.</para>
 	</section>
 	<section>
-		<title>xfs_repair – Phase 7</title>
+		<title>xfs_repair - Phase 7</title>
 		<para>nlinks for inodes are corrected based on the data collected in phase 6.</para>
 	</section>
 	<section>
 		<title>Triaging xfs_check and xfs_repair problems</title>
-		<para>Mostofthetime,inodeinformationisrequired:</para>
+		<para>Most of the time, inode information is required:</para>
 		<para><programlisting>
 > inode &lt;inode number&gt;
 > print

@@ -97,7 +97,7 @@
 > sb 0
 > print rootino
 </programlisting></para>
-		<para>Fordirectories,wecanalsodumpthecontentsfromtheextentlistshownintheinode:</para>
+		<para>For directories, we can also dump the contents from the extent lists hown in the inode:</para>
 		<para><programlisting>
 > dblock &lt;file offset in blocks&gt;
 > print

@@ -181,13 +181,13 @@ u.sfdir2.hdr.i8count = 0
 u.sfdir2.hdr.parent.i4 = 135</programlisting></para>
 	</section>
 	<section>
-		<title>Mount and Repair Fails – Corrupted Log</title>
+		<title>Mount and Repair Fails - Corrupted Log</title>
 		<para>If the log is corrupted you will see an error like:</para>
 		<para><programlisting>
 # mount &lt;filesystem&gt;
 mount: Unknown error 990
 # dmesg | tail -20
-Filesystem “&lt;filesystem&gt;": xfs_inode_recover: Bad inode magic number . . .
+Filesystem "&lt;filesystem&gt;": xfs_inode_recover: Bad inode magic number . . .
 Filesystem "dm-0": XFS internal error xlog_recover_do_inode_trans(1) at line 2352 Caller 0xffffffff88307729
 XFS: log mount/recovery failed: error 990 XFS: log mount failed
 # xfs_repair &lt;device&gt;

@@ -200,9 +200,9 @@ re-running xfs_repair. If you are unable
 the -L option to destroy the log and attempt a repair.
 Note that destroying the log may cause corruption -- please attempt a mount
 of the filesystem before doing this.</programlisting></para>
-		<para>Usefulinformationcanbecollectedfortriage:</para>
+		<para>Useful information can becollected for triage:</para>
 		<para><programlisting>
-# /usr/sbin/xfs_logprint –C &lt;filename&gt; &lt;device&gt;
+# /usr/sbin/xfs_logprint -C &lt;filename&gt; &lt;device&gt;
 # /usr/sbin/xfs_logprint -t &lt;device&gt;</programlisting></para>
 		<para>But in this case, the only option may be to throw the log away:</para>
 		<para><programlisting>

_______________________________________________
xfs mailing list
[email protected]
http://oss.sgi.com/mailman/listinfo/xfs

Fix up a few formatting errors pointed out by Turbo Fredriksson, and while at it also remove various non-ASCII characters that sneaked in during the initial conversion

Reported-by Turbo Fredriksson <[email protected]>

Signed-off-by Christoph Hellwig <[email protected]>

Quoted 5 lines · Christoph Hellwig

Fix up a few formatting errors pointed out by Turbo Fredriksson, and while at it also remove various non-ASCII characters that sneaked in during the initial conversion

Quoted 2 lines

Reported-by Turbo Fredriksson <[email protected]>

Signed-off-by Christoph Hellwig <[email protected]>

looks good to me, but one minor change still needed....

Reviewed-by Dave Chinner <[email protected]>