sdhci-s3c: Add support no internal clock divider in host controller
Subsystems (4)
PATCH v5 2/2 sdhci-s3c: Add support no internal clock divider in host controller
From: Jeongbae Seo <[email protected]>
This patch adds to support no internal clock divider in SDHCI. The external clock divider can be used to make a proper clock because SDHCI doesn't support internal clock divider by itself.
If external clock divider type is selected, some functions related with clock control will be overridened by other functions.
The current clock control index is added to let you know which clock bus is used for SDHCI when using overriding functions.
The checking functions is added into sdhci_s3c_consider_clock, because clock divider step is different from that of host controller.
---
Changes since v4:
- Added missing change
Changes since v3:
- Modified comparision condition as per Kyungmin Park's suggestion
Changes since v2:
- Changed clock control method to overriding from using quirk
- This patch is referred from that of Jaehoon Chung's support non-standard clock setting
Changes since v1:
- Separated to each topic
NOTE :
- This patch depends on following.
[PATCH 4/5] ARM: SAMSUNG : Add clock types into platform data
drivers/mmc/host/sdhci-s3c.c | 62 ++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 62 insertions(+), 0 deletions(-)
drivers/mmc/host/sdhci-s3c.c +62 -0
@@ -130,6 +130,15 @@ static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,if (!clksrc)return UINT_MAX ; +/* +* Clock divider's step is different as 1 from that of host controller +* when 'clk_type' is S3C_SDHCI_CLK_DIV_EXTERNAL. +*/ +if (ourhost->pdata->clk_type ==S3C_SDHCI_CLK_DIV_EXTERNAL ) { + rate =clk_round_rate (clksrc, wanted); +return wanted - rate; + } + rate =clk_get_rate (clksrc);for (div =1 ; div <256 ; div *=2 ) {
@@ -232,6 +241,42 @@ static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)return min; } +/* sdhci_cmu_get_max_clk - callback to get maximum clock frequency.*/ +static unsigned int sdhci_cmu_get_max_clock (struct sdhci_host *host) +{ +struct sdhci_s3c *ourhost =to_s3c (host); + +return clk_round_rate (ourhost->clk_bus[ourhost->cur_clk],UINT_MAX ); +} + +/* sdhci_cmu_get_min_clock - callback to get minimal supported clock value. */ +static unsigned int sdhci_cmu_get_min_clock (struct sdhci_host *host) +{ +struct sdhci_s3c *ourhost =to_s3c (host); + +/* +* initial clock can be in the frequency range of +* 100KHz-400KHz, so we set it as max value. +*/ +return clk_round_rate (ourhost->clk_bus[ourhost->cur_clk],400000 ); +} + +/* sdhci_cmu_set_clock - callback on clock change.*/ +static void sdhci_cmu_set_clock (struct sdhci_host *host,unsigned int clock) +{ +struct sdhci_s3c *ourhost =to_s3c (host); + +/* don't bother if the clock is going off */ +if (clock ==0 ) +return ; + +sdhci_s3c_set_clock (host, clock); + +clk_set_rate (ourhost->clk_bus[ourhost->cur_clk], clock); + + host->clock = clock; +} +static struct sdhci_ops sdhci_s3c_ops = { .get_max_clock = sdhci_s3c_get_max_clk, .set_clock = sdhci_s3c_set_clock,
@@ -361,6 +406,13 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) clks++; sc->clk_bus[ptr] = clk; + +/* +* save current clock index to know which clock bus +* is used later in overriding functions. +*/ + sc->cur_clk = ptr; +clk_enable (clk); dev_info(dev, "clock source %d: %s (%ld Hz)\n",
@@ -427,6 +479,16 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)/* HSMMC on Samsung SoCs uses SDCLK as timeout clock */ host->quirks |=SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK ; +/* +* If controller does not have internal clock divider, +* we can use overriding functions instead of default. +*/ +if (pdata->clk_type ==S3C_SDHCI_CLK_DIV_EXTERNAL ) { + sdhci_s3c_ops.set_clock = sdhci_cmu_set_clock; + sdhci_s3c_ops.get_min_clock = sdhci_cmu_get_min_clock; + sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock; + } +/* It supports additional host capabilities if needed */ if (pdata->host_caps) host->mmc->caps |= pdata->host_caps;
Signature · 1 line
1.6.2.5
PATCH v5 2/2 sdhci-s3c: Add support no internal clock divider in host controller
Hi Chris,
we make a conclusion use this patch. Can you merge it for 2.6.37?
Quoted 143 lines · Kukjin Kim
From: Jeongbae Seo <[email protected]>
This patch adds to support no internal clock divider in SDHCI. The external clock divider can be used to make a proper clock because SDHCI doesn't support internal clock divider by itself.
If external clock divider type is selected, some functions related with clock control will be overridened by other functions.
The current clock control index is added to let you know which clock bus is used for SDHCI when using overriding functions.
The checking functions is added into
sdhci_s3c_consider_clock, because clock divider step is different from that of host controller.Signed-off-by Jeongbae Seo <[email protected]>Cc Jaehoon Chung <[email protected]>Cc Kyungmin Park <[email protected]>Cc Ben Dooks <[email protected]>Signed-off-by Kukjin Kim <[email protected]>---
Changes since v4:
- Added missing changeChanges since v3:
- Modified comparision condition as per Kyungmin Park's suggestionChanges since v2:
- Changed clock control method to overriding from using quirk
- This patch is referred from that of Jaehoon Chung's support non-standard clock settingChanges since v1:
- Separated to each topicNOTE :
- This patch depends on following.
?[PATCH 4/5] ARM: SAMSUNG : Add clock types into platform data?drivers/mmc/host/sdhci-s3c.c | ? 62 ++++++++++++++++++++++++++++++++++++++++++ ?1 files changed, 62 insertions(+), 0 deletions(-)
drivers/mmc/host/sdhci-s3c.c +52
-0@@ -130,6 +130,15 @@ static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost, ? ? ? ?if (!clksrc) ? ? ? ? ? ? ? ?return UINT_MAX; + ? ? ? /* + ? ? ? ?* Clock divider's step is different as 1 from that of host controller + ? ? ? ?* when 'clk_type' is S3C_SDHCI_CLK_DIV_EXTERNAL. + ? ? ? ?*/ + ? ? ? if (ourhost->pdata->clk_type == S3C_SDHCI_CLK_DIV_EXTERNAL) { + ? ? ? ? ? ? ? rate = clk_round_rate(clksrc, wanted); + ? ? ? ? ? ? ? return wanted - rate; + ? ? ? } + ? ? ? ?rate = clk_get_rate(clksrc); ? ? ? ?for (div = 1; div < 256; div *= 2) {@@ -232,6 +241,42 @@ static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host) ? ? ? ?return min; ?} +/* sdhci_cmu_get_max_clk - callback to get maximum clock frequency.*/ +static unsigned int sdhci_cmu_get_max_clock (struct sdhci_host *host) +{ + ? ? ? struct sdhci_s3c *ourhost = to_s3c(host); + + ? ? ? return clk_round_rate(ourhost->clk_bus[ourhost->cur_clk], UINT_MAX); +} + +/* sdhci_cmu_get_min_clock - callback to get minimal supported clock value. */ +static unsigned int sdhci_cmu_get_min_clock (struct sdhci_host *host) +{ + ? ? ? struct sdhci_s3c *ourhost = to_s3c(host); + + ? ? ? /* + ? ? ? ?* initial clock can be in the frequency range of + ? ? ? ?* 100KHz-400KHz, so we set it as max value. + ? ? ? ?*/ + ? ? ? return clk_round_rate(ourhost->clk_bus[ourhost->cur_clk], 400000); +} + +/* sdhci_cmu_set_clock - callback on clock change.*/ +static void sdhci_cmu_set_clock (struct sdhci_host *host,unsigned int clock) +{ + ? ? ? struct sdhci_s3c *ourhost = to_s3c(host); + + ? ? ? /* don't bother if the clock is going off */ + ? ? ? if (clock == 0) + ? ? ? ? ? ? ? return; + + ? ? ? sdhci_s3c_set_clock(host, clock); + + ? ? ? clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock); + + ? ? ? host->clock = clock; +} + ?static struct sdhci_ops sdhci_s3c_ops = { ? ? ? ?.get_max_clock ? ? ? ? ?= sdhci_s3c_get_max_clk, ? ? ? ?.set_clock ? ? ? ? ? ? ?= sdhci_s3c_set_clock,@@ -361,6 +406,13 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev) ? ? ? ? ? ? ? ?clks++; ? ? ? ? ? ? ? ?sc->clk_bus[ptr] = clk; + + ? ? ? ? ? ? ? /* + ? ? ? ? ? ? ? ?* save current clock index to know which clock bus + ? ? ? ? ? ? ? ?* is used later in overriding functions. + ? ? ? ? ? ? ? ?*/ + ? ? ? ? ? ? ? sc->cur_clk = ptr; + ? ? ? ? ? ? ? ?clk_enable(clk); ? ? ? ? ? ? ? ?dev_info(dev, "clock source %d: %s (%ld Hz)\n",@@ -427,6 +479,16 @@ static int __devinit sdhci_s3c_probe(struct platform_device *pdev)? ? ? ?/* HSMMC on Samsung SoCs uses SDCLK as timeout clock */ ? ? ? ?host->quirks |=
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;+ ? ? ? /*
+ ? ? ? ?* If controller does not have internal clock divider,
+ ? ? ? ?* we can use overriding functions instead of default.
+ ? ? ? ?*/
+ ? ? ? if (pdata->clk_type==S3C_SDHCI_CLK_DIV_EXTERNAL) {
+ ? ? ? ? ? ? ? sdhci_s3c_ops.set_clock =sdhci_cmu_set_clock;
+ ? ? ? ? ? ? ? sdhci_s3c_ops.get_min_clock =sdhci_cmu_get_min_clock;
+ ? ? ? ? ? ? ? sdhci_s3c_ops.get_max_clock =sdhci_cmu_get_max_clock;
+ ? ? ? }
+
? ? ? ?/* It supports additional host capabilities if needed */ ? ? ? ?if (pdata->host_caps)
? ? ? ? ? ? ? ?host->mmc->caps |=pdata->host_caps;
--
1.6.2.5--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo at vger.kernel.org
More majordomo info at ?http://vger.kernel.org/majordomo-info.html
PATCH v5 2/2 sdhci-s3c: Add support no internal clock divider in host controller
Hi Kyungmin,
Quoted 5 lines · Kyungmin Park
Hi Chris,
we make a conclusion use this patch. Can you merge it for 2.6.37?
Acked-by Kyungmin Park <[email protected]>
I don't feel that I can, because Ben Dooks is listed as the maintainer for this driver and the patch does not have his ACK.
I don't know what to do about this; I've already tried asking Ben whether he intends to continue maintaining sdhci-s3c, with no reply.
Thanks,
- Chris.
Signature · 2 lines
Chris Ball <[email protected]> <http://printf.net/> One Laptop Per Child
PATCH v5 2/2 sdhci-s3c: Add support no internal clock divider in host controller
Quoted 8 lines · Chris Ball
Hi Kyungmin,
Quoted 4 lines · Kyungmin Park
Hi Chris,
we make a conclusion use this patch. Can you merge it for 2.6.37?
Quoted 8 lines
Quoted 1 line
Acked-by Kyungmin Park <[email protected]>I don't feel that I can, because Ben Dooks is listed as the maintainer for this driver and the patch does not have his ACK.
I don't know what to do about this; I've already tried asking Ben whether he intends to continue maintaining sdhci-s3c, with no reply.
Hi Chris,
Yeah, you're right. The sdhci-s3c's maintainer is Ben Dooks. So if get a his ack, it's best. But if you're ok this, in my opinion, you can merge this. And as I'm a maintainer of Samsung stuff with Ben Dooks, I already merged regarding patches, such as sdhci-s3c platform handling into my tree for 37 merge window.
...
Ben, could you please check this patch?...this is ok to me for Samsung HSMMC...if any opinions, please kindly let us know.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.
PATCH v5 2/2 sdhci-s3c: Add support no internal clock divider in host controller
In reply to Chris BallQuoted 7 lines · On Tue, 12 Oct 2010 03:59:46 +0100 Chris Ball <[email protected]> wrote:
Hi Kyungmin,
Quoted 4 lines · Kyungmin Park
Hi Chris,
we make a conclusion use this patch. Can you merge it for 2.6.37?
Quoted 8 lines
Quoted 1 line
Acked-by Kyungmin Park <[email protected]>I don't feel that I can, because Ben Dooks is listed as the maintainer for this driver and the patch does not have his ACK.
I don't know what to do about this; I've already tried asking Ben whether he intends to continue maintaining sdhci-s3c, with no reply.
People get busy and take vacations and change roles, etc.
Sometimes, the best you can do is to make everyone aware of what's going on and then simply proceed on your own.
PATCH v5 2/2 sdhci-s3c: Add support no internal clock divider in host controller
Quoted 16 lines · Andrew Morton
Quoted 12 lines · On Tue, 12 Oct 2010 03:59:46 +0100 Chris Ball <[email protected]> wrote:
Hi Kyungmin,
Quoted 5 lines · Kyungmin Park
Hi Chris,
we make a conclusion use this patch. Can you merge it for 2.6.37?
Acked-by Kyungmin Park <[email protected]>I don't feel that I can, because Ben Dooks is listed as the maintainer for this driver and the patch does not have his ACK.
Quoted 8 lines
Quoted 3 lines
I don't know what to do about this; I've already tried asking Ben whether he intends to continue maintaining sdhci-s3c, with no reply.
People get busy and take vacations and change roles, etc.
Sometimes, the best you can do is to make everyone aware of what's going on and then simply proceed on your own.
Hi Chris,
How was going on?
I couldn't find this in your tree yet :-( Please let me know about your merge plan of this. If any problems, please kindly let me know :-)
Ben,
If you're ok this to you, please send your ack... it would be helpful to Chris to handle this ;-)
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.