BUG: USB3.0 µPD720200 complains about over-current
Hi!
I know, this is place where only Gods speak and others not. But I am sure there is something odd I found and someone here can take care of it.
In situation when nothing is connected to any USB ports Ubuntu 10.04.1 stock kernel complains:
spider@spider:~$ zcat /var/log/kern.log.2.gz | grep -i current | head Sep 29 23:30:12 spider kernel: [ 9.048388] hub 8-0:1.0: over-current change on port 1 Sep 29 23:30:12 spider kernel: [ 9.152036] hub 8-0:1.0: over-current change on port 2 Sep 29 23:30:12 spider kernel: [ 9.256038] hub 8-0:1.0: over-current change on port 3 Sep 29 23:30:12 spider kernel: [ 9.360037] hub 8-0:1.0: over-current change on port 1 Sep 29 23:30:12 spider kernel: [ 9.464036] hub 8-0:1.0: over-current change on port 2 Sep 29 23:30:12 spider kernel: [ 9.570621] hub 8-0:1.0: over-current change on port 3 Sep 29 23:30:12 spider kernel: [ 9.672037] hub 8-0:1.0: over-current change on port 1 Sep 29 23:30:12 spider kernel: [ 9.776038] hub 8-0:1.0: over-current change on port 2 Sep 29 23:30:12 spider kernel: [ 9.880049] hub 8-0:1.0: over-current change on port 3 Sep 29 23:30:13 spider kernel: [ 9.984041] hub 8-0:1.0: over-current change on port 1 spider@spider:~$
This runs forever and makes computer busy forever just running those messages. I verified same behavior exists with vanilla 2.6.35.7. Disabling USB3.0 in BIOS turns off problem and all USB2 ports remain to work. So probably this is xHCI driver who complains. I looked bit around in source and see it is copied from USB2 code and possibly USB3 has something different. I've read USB3 can supply more power, so possibly something here has changed.
My hardware:
Motherboard ASUS M4A88T-I Deluxe
http://www.asus.com/product.aspx?P_ID=jGAoIFEziW5sPYy7
it has USB3 chip "NEC D720200F1" on it:
http://digi.physic.ut.ee/mw/images/d/de/20100926_digi_007.png
NEC is joined Renesas, so this is his link for datasheet etc:
http://www2.renesas.com/usb/en/product/upd720200.html
If you propose patch, I can give him test run.
Tõnu
Quoted 2 lines · Tõnu Samuel
Sep 29 23:30:12 spider kernel: [ 9.048388] hub 8-0:1.0: over-currentchange on port 1
I forgot to add dmesg output. Because it is 840 lines I put it here
http://pastebin.com/xEfiKYW5
Tõnu
Re: BUG: USB3.0 ?PD720200 complains about over-current
In reply to Tõnu SamuelQuoted 5 lines · T?nu Samuel
Hi!
I know, this is place where only Gods speak and others not. But I am sure there is something odd I found and someone here can take care of it.
For usb specific stuff like this, try using the
[email protected] mailing list.
Quoted 25 lines
In situation when nothing is connected to any USB ports Ubuntu 10.04.1 stock kernel complains:
spider@spider:~$ zcat /var/log/kern.log.2.gz | grep -i current | head Sep 29 23:30:12 spider kernel: [ 9.048388] hub 8-0:1.0: over-current change on port 1 Sep 29 23:30:12 spider kernel: [ 9.152036] hub 8-0:1.0: over-current change on port 2 Sep 29 23:30:12 spider kernel: [ 9.256038] hub 8-0:1.0: over-current change on port 3 Sep 29 23:30:12 spider kernel: [ 9.360037] hub 8-0:1.0: over-current change on port 1 Sep 29 23:30:12 spider kernel: [ 9.464036] hub 8-0:1.0: over-current change on port 2 Sep 29 23:30:12 spider kernel: [ 9.570621] hub 8-0:1.0: over-current change on port 3 Sep 29 23:30:12 spider kernel: [ 9.672037] hub 8-0:1.0: over-current change on port 1 Sep 29 23:30:12 spider kernel: [ 9.776038] hub 8-0:1.0: over-current change on port 2 Sep 29 23:30:12 spider kernel: [ 9.880049] hub 8-0:1.0: over-current change on port 3 Sep 29 23:30:13 spider kernel: [ 9.984041] hub 8-0:1.0: over-current change on port 1 spider@spider:~$
Quoted 7 lines
This runs forever and makes computer busy forever just running those messages. I verified same behavior exists with vanilla 2.6.35.7. Disabling USB3.0 in BIOS turns off problem and all USB2 ports remain to work. So probably this is xHCI driver who complains. I looked bit around in source and see it is copied from USB2 code and possibly USB3 has something different. I've read USB3 can supply more power, so possibly something here has changed.
Do you have the xhci driver loaded for the USB 3.0 controller?
Quoted 5 lines
My hardware:
Motherboard ASUS M4A88T-I Deluxe
http://www.asus.com/product.aspx?P_ID=jGAoIFEziW5sPYy7
Quoted 7 lines
it has USB3 chip "NEC D720200F1" on it:
http://digi.physic.ut.ee/mw/images/d/de/20100926_digi_007.pngNEC is joined Renesas, so this is his link for datasheet etc:
http://www2.renesas.com/usb/en/product/upd720200.htmlIf you propose patch, I can give him test run.
Any xhci developers have an idea?
thanks,
greg k-h