S3C24xx: Move register definitions into their user
Subsystems (2)
PATCH 1/1 S3C24xx: Move register definitions into their user
From: Juergen Beisert <[email protected]>
Subject: [PATCH] S3C24xx: Move register definitions into their user
Follow the other architectures and drivers defining their used registers only locally.
Signed-off-by Juergen Beisert <[email protected]>
--- arch/arm/mach-s3c24xx/generic.c | 29 ++++++++++++++++++ arch/arm/mach-s3c24xx/include/mach/s3c24x0-iomap.h | 33 --------------------- 2 files changed, 29 insertions(+), 33 deletions(-)
arch/arm/mach-s3c24xx/generic.c +29 -0
@@ -29,6 +29,35 @@#include <asm/io.h> #include <mach/s3c24x0-iomap.h> +#define LOCKTIME (S3C24X0_CLOCK_POWER_BASE) +#define MPLLCON (S3C24X0_CLOCK_POWER_BASE + 0x4) +#define UPLLCON (S3C24X0_CLOCK_POWER_BASE + 0x8) +#define CLKCON (S3C24X0_CLOCK_POWER_BASE + 0xc) +#define CLKSLOW (S3C24X0_CLOCK_POWER_BASE + 0x10) +#define CLKDIVN (S3C24X0_CLOCK_POWER_BASE + 0x14) + +#define TCFG0 (S3C24X0_TIMER_BASE + 0x00) +#define TCFG1 (S3C24X0_TIMER_BASE + 0x04) +#define TCON (S3C24X0_TIMER_BASE + 0x08) +#define TCNTB0 (S3C24X0_TIMER_BASE + 0x0c) +#define TCMPB0 (S3C24X0_TIMER_BASE + 0x10) +#define TCNTO0 (S3C24X0_TIMER_BASE + 0x14) +#define TCNTB1 (S3C24X0_TIMER_BASE + 0x18) +#define TCMPB1 (S3C24X0_TIMER_BASE + 0x1c) +#define TCNTO1 (S3C24X0_TIMER_BASE + 0x20) +#define TCNTB2 (S3C24X0_TIMER_BASE + 0x24) +#define TCMPB2 (S3C24X0_TIMER_BASE + 0x28) +#define TCNTO2 (S3C24X0_TIMER_BASE + 0x2c) +#define TCNTB3 (S3C24X0_TIMER_BASE + 0x30) +#define TCMPB3 (S3C24X0_TIMER_BASE + 0x34) +#define TCNTO3 (S3C24X0_TIMER_BASE + 0x38) +#define TCNTB4 (S3C24X0_TIMER_BASE + 0x3c) +#define TCNTO4 (S3C24X0_TIMER_BASE + 0x40) + +#define WTCON (S3C24X0_WATCHDOG_BASE) +#define WTDAT (S3C24X0_WATCHDOG_BASE + 0x04) +#define WTCNT (S3C24X0_WATCHDOG_BASE + 0x08) +/** * Calculate the current M-PLL clock. * @return Current frequency in Hz
arch/arm/mach-s3c24xx/include/mach/s3c24x0-iomap.h +0 -33
@@ -40,39 +40,6 @@#define S3C2410_SPI_BASE 0x59000000#define S3C2410_SDI_BASE 0x5A000000 -/* Clock control (direct access) */ - -#define LOCKTIME (S3C24X0_CLOCK_POWER_BASE) -#define MPLLCON (S3C24X0_CLOCK_POWER_BASE + 0x4) -#define UPLLCON (S3C24X0_CLOCK_POWER_BASE + 0x8) -#define CLKCON (S3C24X0_CLOCK_POWER_BASE + 0xc) -#define CLKSLOW (S3C24X0_CLOCK_POWER_BASE + 0x10) -#define CLKDIVN (S3C24X0_CLOCK_POWER_BASE + 0x14) - -/* Timer (direct access) */ -#define TCFG0 (S3C24X0_TIMER_BASE + 0x00) -#define TCFG1 (S3C24X0_TIMER_BASE + 0x04) -#define TCON (S3C24X0_TIMER_BASE + 0x08) -#define TCNTB0 (S3C24X0_TIMER_BASE + 0x0c) -#define TCMPB0 (S3C24X0_TIMER_BASE + 0x10) -#define TCNTO0 (S3C24X0_TIMER_BASE + 0x14) -#define TCNTB1 (S3C24X0_TIMER_BASE + 0x18) -#define TCMPB1 (S3C24X0_TIMER_BASE + 0x1c) -#define TCNTO1 (S3C24X0_TIMER_BASE + 0x20) -#define TCNTB2 (S3C24X0_TIMER_BASE + 0x24) -#define TCMPB2 (S3C24X0_TIMER_BASE + 0x28) -#define TCNTO2 (S3C24X0_TIMER_BASE + 0x2c) -#define TCNTB3 (S3C24X0_TIMER_BASE + 0x30) -#define TCMPB3 (S3C24X0_TIMER_BASE + 0x34) -#define TCNTO3 (S3C24X0_TIMER_BASE + 0x38) -#define TCNTB4 (S3C24X0_TIMER_BASE + 0x3c) -#define TCNTO4 (S3C24X0_TIMER_BASE + 0x40) - -/* Watchdog (direct access) */ -#define WTCON (S3C24X0_WATCHDOG_BASE) -#define WTDAT (S3C24X0_WATCHDOG_BASE + 0x04) -#define WTCNT (S3C24X0_WATCHDOG_BASE + 0x08) -/* * if we are booting from NAND, its internal SRAM occures at * a different address than without this feature
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox