Skip to contentSkip to conversation

imx: Separate framebuffer platformdata and the videomode

PATCH In review Juergen Beisert 2 participants 3 messages Oct 16, 2010 – Oct 19, 2010

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 imx: Separate framebuffer platformdata and the videomode

commit 4ac682bf08b61708bc432c48e58a6d1cf9ea3832

Author: Juergen Beisert <[email protected]>
Date:   Sat Oct 16 15:32:06 2010 +0200

imx: Separate framebuffer platformdata and the videomode

This patch separates the imx platformdata and its videomode in two structures, in order to support more than one defined videomode in the boardfile. This is intended to support runtime videomode selection later on. It also uses now the same videomode setup style than the imx-fpu based systems (like the i.MX35).

arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c +15 -13
index c2eb398..b1b9852 100644
@@ -119,20 +119,22 @@ static struct device_d nand_dev = {
 	.platform_data	= &nand_info,
 };
 
+static struct fb_videomode cmo_display = {
+	.name		= "CMO-QVGA",
+	.refresh	= 60,
+	.xres		= 320,
+	.yres		= 240,
+	.pixclock	= KHZ2PICOS(6500),
+	.hsync_len	= 30,
+	.left_margin	= 38,
+	.right_margin	= 20,
+	.vsync_len	= 3,
+	.upper_margin	= 15,
+	.lower_margin	= 4,
+};
+
 static struct imx_fb_videomode imxfb_mode = {
-	.mode = {
-		.name		= "CMO-QVGA",
-		.refresh	= 60,
-		.xres		= 320,
-		.yres		= 240,
-		.pixclock	= KHZ2PICOS(6500),
-		.hsync_len	= 30,
-		.left_margin	= 38,
-		.right_margin	= 20,
-		.vsync_len	= 3,
-		.upper_margin	= 15,
-		.lower_margin	= 4,
-	},
+	.mode		= &cmo_display,
 	.pcr		= 0xCAD08B80,
 	.bpp		= 16,
 };
arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c +15 -13
index 62fc14e..3ea2466 100644
@@ -186,20 +186,22 @@ static void eukrea_cpuimx27_mmu_init(void)
 #endif
 
 #ifdef CONFIG_DRIVER_VIDEO_IMX
+static struct fb_videomode cmo_display = {
+	.name		= "CMO-QVGA",
+	.refresh	= 60,
+	.xres		= 320,
+	.yres		= 240,
+	.pixclock	= 156000,
+	.hsync_len	= 30,
+	.left_margin	= 38,
+	.right_margin	= 20,
+	.vsync_len	= 3,
+	.upper_margin	= 15,
+	.lower_margin	= 4,
+};
+
 static struct imx_fb_videomode imxfb_mode = {
-	.mode = {
-		.name		= "CMO-QVGA",
-		.refresh	= 60,
-		.xres		= 320,
-		.yres		= 240,
-		.pixclock	= 156000,
-		.hsync_len	= 30,
-		.left_margin	= 38,
-		.right_margin	= 20,
-		.vsync_len	= 3,
-		.upper_margin	= 15,
-		.lower_margin	= 4,
-	},
+	.mode		= &cmo_display,
 	.pcr		= 0xFAD08B80,
 	.bpp		= 16,};
 
arch/arm/boards/guf-neso/board.c +15 -13
index 9c85c08..6949675 100644
@@ -91,20 +91,22 @@ static struct device_d nand_dev = {
 	.platform_data	= &nand_info,
 };
 
+static struct fb_videomode cpt_display = {
+	.name		= "CPT CLAA070LC0JCT",
+	.refresh	= 60,
+	.xres		= 800,
+	.yres		= 480,
+	.pixclock	= KHZ2PICOS(27000),
+	.hsync_len	= 1,	/* DE only sync */
+	.left_margin	= 50,
+	.right_margin	= 50,
+	.vsync_len	= 1,	/* DE only sync */
+	.upper_margin	= 10,
+	.lower_margin	= 10,
+};
+
 static struct imx_fb_videomode imxfb_mode = {
-	.mode = {
-		.name		= "CPT CLAA070LC0JCT",
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.pixclock	= KHZ2PICOS(27000),
-		.hsync_len	= 1,	/* DE only sync */
-		.left_margin	= 50,
-		.right_margin	= 50,
-		.vsync_len	= 1,	/* DE only sync */
-		.upper_margin	= 10,
-		.lower_margin	= 10,
-	},
+	.mode = &cpt_display,
 	/*
 	 * - TFT style panel
 	 * - clk enabled while idle
arch/arm/boards/imx21ads/imx21ads.c +18 -16
index 44d37aa..81006de 100644
@@ -79,24 +79,26 @@ static struct device_d cs8900_dev = {
 	// IRQ is connected to UART3_RTS
 };
 
+static struct fb_videomode sharp_display = {
+	.name           = "Sharp-LQ035Q7",
+	.refresh        = 60,
+	.xres           = 240,
+	.yres           = 320,
+	.pixclock       = 188679,
+	.left_margin    = 6,
+	.right_margin   = 16,
+	.upper_margin   = 8,
+	.lower_margin   = 10,
+	.hsync_len      = 2,
+	.vsync_len      = 1,
+	.sync           = 0,
+	.vmode          = FB_VMODE_NONINTERLACED,
+	.flag           = 0,
+};
+
 /* Sharp LQ035Q7DB02 QVGA display */
 static struct imx_fb_videomode imx_fb_modedata = {
-        .mode = {
-		.name           = "Sharp-LQ035Q7",
-		.refresh        = 60,
-		.xres           = 240,
-		.yres           = 320,
-		.pixclock       = 188679,
-		.left_margin    = 6,
-		.right_margin   = 16,
-		.upper_margin   = 8,
-		.lower_margin   = 10,
-		.hsync_len      = 2,
-		.vsync_len      = 1,
-		.sync           = 0,
-		.vmode          = FB_VMODE_NONINTERLACED,
-		.flag           = 0,
-	},
+        .mode           = &sharp_display,
         .pcr            = 0xfb108bc7,
         .bpp            = 16,
 };
arch/arm/boards/pcm038/pcm038.c +15 -13
index 3a9b413..026e9c0 100644
@@ -127,20 +127,22 @@ static struct device_d nand_dev = {
 	.platform_data	= &nand_info,
 };
 
+static struct fb_videomode sharp_display = {
+	.name		= "Sharp-LQ035Q7",
+	.refresh	= 60,
+	.xres		= 240,
+	.yres		= 320,
+	.pixclock	= 188679, /* in ps (5.3MHz) */
+	.hsync_len	= 7,
+	.left_margin	= 5,
+	.right_margin	= 16,
+	.vsync_len	= 1,
+	.upper_margin	= 7,
+	.lower_margin	= 9,
+};
+
 static struct imx_fb_videomode imxfb_mode = {
-	.mode = {
-		.name		= "Sharp-LQ035Q7",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 188679, /* in ps (5.3MHz) */
-		.hsync_len	= 7,
-		.left_margin	= 5,
-		.right_margin	= 16,
-		.vsync_len	= 1,
-		.upper_margin	= 7,
-		.lower_margin	= 9,
-	},
+	.mode		= &sharp_display,
 	/*
 	 * - HSYNC active high
 	 * - VSYNC active high
arch/arm/mach-imx/include/mach/imxfb.h +1 -1
index 16b43ea..7baa244 100644
@@ -50,7 +50,7 @@
 #define DMACR_TM(x)	((x) & 0xf)
 
 struct imx_fb_videomode {
-	struct fb_videomode mode;
+	struct fb_videomode *mode;
 	u32 pcr;
 	unsigned char	bpp;
 };
drivers/video/imx.c +3 -3
index ac51858..6ccd77e 100644
@@ -555,9 +555,9 @@ static int imxfb_probe(struct device_d *dev)
 	fbi->enable = pdata->enable;
 	fbi->dev = dev;
 	info->priv = fbi;
-	info->mode = &pdata->mode->mode;
-	info->xres = pdata->mode->mode.xres;
-	info->yres = pdata->mode->mode.yres;
+	info->mode = pdata->mode->mode;
+	info->xres = pdata->mode->mode->xres;
+	info->yres = pdata->mode->mode->yres;
 	info->bits_per_pixel = pdata->mode->bpp;
 	info->fbops = &imxfb_ops;
 
Signature · 9 lines
Pengutronix e.K.                              | Juergen Beisert             |
Linux Solutions for Science and Industry      | Phone: +49-8766-939 228     |
Vertretung Sued/Muenchen, Germany             | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686              | http://www.pengutronix.de/  |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
maintainer
#1 lore raw

Hi Jürgen,

Quoted 11 lines · Juergen Beisert

commit 4ac682bf08b61708bc432c48e58a6d1cf9ea3832

Author: Juergen Beisert <[email protected]>
Date:   Sat Oct 16 15:32:06 2010 +0200

imx: Separate framebuffer platformdata and the videomode

This patch separates the imx platformdata and its videomode in two structures, in order to support more than one defined videomode in the boardfile. This is intended to support runtime videomode selection later on. It also uses now the same videomode setup style than the imx-fpu based systems (like the i.MX35).

Multiple displays can have different bpp/pcr values. Shouldn't we build an array of imx_fb_videomode instead?

Sascha

Quoted 251 lines
arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c +15 -13
index c2eb398..b1b9852 100644
@@ -119,20 +119,22 @@ static struct device_d nand_dev = {
 	.platform_data	= &nand_info,
 };
 
+static struct fb_videomode cmo_display = {
+	.name		= "CMO-QVGA",
+	.refresh	= 60,
+	.xres		= 320,
+	.yres		= 240,
+	.pixclock	= KHZ2PICOS(6500),
+	.hsync_len	= 30,
+	.left_margin	= 38,
+	.right_margin	= 20,
+	.vsync_len	= 3,
+	.upper_margin	= 15,
+	.lower_margin	= 4,
+};
+
 static struct imx_fb_videomode imxfb_mode = {
-	.mode = {
-		.name		= "CMO-QVGA",
-		.refresh	= 60,
-		.xres		= 320,
-		.yres		= 240,
-		.pixclock	= KHZ2PICOS(6500),
-		.hsync_len	= 30,
-		.left_margin	= 38,
-		.right_margin	= 20,
-		.vsync_len	= 3,
-		.upper_margin	= 15,
-		.lower_margin	= 4,
-	},
+	.mode		= &cmo_display,
 	.pcr		= 0xCAD08B80,
 	.bpp		= 16,
 };
arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c +15 -13
index 62fc14e..3ea2466 100644
@@ -186,20 +186,22 @@ static void eukrea_cpuimx27_mmu_init(void)
 #endif
 
 #ifdef CONFIG_DRIVER_VIDEO_IMX
+static struct fb_videomode cmo_display = {
+	.name		= "CMO-QVGA",
+	.refresh	= 60,
+	.xres		= 320,
+	.yres		= 240,
+	.pixclock	= 156000,
+	.hsync_len	= 30,
+	.left_margin	= 38,
+	.right_margin	= 20,
+	.vsync_len	= 3,
+	.upper_margin	= 15,
+	.lower_margin	= 4,
+};
+
 static struct imx_fb_videomode imxfb_mode = {
-	.mode = {
-		.name		= "CMO-QVGA",
-		.refresh	= 60,
-		.xres		= 320,
-		.yres		= 240,
-		.pixclock	= 156000,
-		.hsync_len	= 30,
-		.left_margin	= 38,
-		.right_margin	= 20,
-		.vsync_len	= 3,
-		.upper_margin	= 15,
-		.lower_margin	= 4,
-	},
+	.mode		= &cmo_display,
 	.pcr		= 0xFAD08B80,
 	.bpp		= 16,};
 
arch/arm/boards/guf-neso/board.c +15 -13
index 9c85c08..6949675 100644
@@ -91,20 +91,22 @@ static struct device_d nand_dev = {
 	.platform_data	= &nand_info,
 };
 
+static struct fb_videomode cpt_display = {
+	.name		= "CPT CLAA070LC0JCT",
+	.refresh	= 60,
+	.xres		= 800,
+	.yres		= 480,
+	.pixclock	= KHZ2PICOS(27000),
+	.hsync_len	= 1,	/* DE only sync */
+	.left_margin	= 50,
+	.right_margin	= 50,
+	.vsync_len	= 1,	/* DE only sync */
+	.upper_margin	= 10,
+	.lower_margin	= 10,
+};
+
 static struct imx_fb_videomode imxfb_mode = {
-	.mode = {
-		.name		= "CPT CLAA070LC0JCT",
-		.refresh	= 60,
-		.xres		= 800,
-		.yres		= 480,
-		.pixclock	= KHZ2PICOS(27000),
-		.hsync_len	= 1,	/* DE only sync */
-		.left_margin	= 50,
-		.right_margin	= 50,
-		.vsync_len	= 1,	/* DE only sync */
-		.upper_margin	= 10,
-		.lower_margin	= 10,
-	},
+	.mode = &cpt_display,
 	/*
 	 * - TFT style panel
 	 * - clk enabled while idle
arch/arm/boards/imx21ads/imx21ads.c +18 -16
index 44d37aa..81006de 100644
@@ -79,24 +79,26 @@ static struct device_d cs8900_dev = {
 	// IRQ is connected to UART3_RTS
 };
 
+static struct fb_videomode sharp_display = {
+	.name           = "Sharp-LQ035Q7",
+	.refresh        = 60,
+	.xres           = 240,
+	.yres           = 320,
+	.pixclock       = 188679,
+	.left_margin    = 6,
+	.right_margin   = 16,
+	.upper_margin   = 8,
+	.lower_margin   = 10,
+	.hsync_len      = 2,
+	.vsync_len      = 1,
+	.sync           = 0,
+	.vmode          = FB_VMODE_NONINTERLACED,
+	.flag           = 0,
+};
+
 /* Sharp LQ035Q7DB02 QVGA display */
 static struct imx_fb_videomode imx_fb_modedata = {
-        .mode = {
-		.name           = "Sharp-LQ035Q7",
-		.refresh        = 60,
-		.xres           = 240,
-		.yres           = 320,
-		.pixclock       = 188679,
-		.left_margin    = 6,
-		.right_margin   = 16,
-		.upper_margin   = 8,
-		.lower_margin   = 10,
-		.hsync_len      = 2,
-		.vsync_len      = 1,
-		.sync           = 0,
-		.vmode          = FB_VMODE_NONINTERLACED,
-		.flag           = 0,
-	},
+        .mode           = &sharp_display,
         .pcr            = 0xfb108bc7,
         .bpp            = 16,
 };
arch/arm/boards/pcm038/pcm038.c +15 -13
index 3a9b413..026e9c0 100644
@@ -127,20 +127,22 @@ static struct device_d nand_dev = {
 	.platform_data	= &nand_info,
 };
 
+static struct fb_videomode sharp_display = {
+	.name		= "Sharp-LQ035Q7",
+	.refresh	= 60,
+	.xres		= 240,
+	.yres		= 320,
+	.pixclock	= 188679, /* in ps (5.3MHz) */
+	.hsync_len	= 7,
+	.left_margin	= 5,
+	.right_margin	= 16,
+	.vsync_len	= 1,
+	.upper_margin	= 7,
+	.lower_margin	= 9,
+};
+
 static struct imx_fb_videomode imxfb_mode = {
-	.mode = {
-		.name		= "Sharp-LQ035Q7",
-		.refresh	= 60,
-		.xres		= 240,
-		.yres		= 320,
-		.pixclock	= 188679, /* in ps (5.3MHz) */
-		.hsync_len	= 7,
-		.left_margin	= 5,
-		.right_margin	= 16,
-		.vsync_len	= 1,
-		.upper_margin	= 7,
-		.lower_margin	= 9,
-	},
+	.mode		= &sharp_display,
 	/*
 	 * - HSYNC active high
 	 * - VSYNC active high
arch/arm/mach-imx/include/mach/imxfb.h +1 -1
index 16b43ea..7baa244 100644
@@ -50,7 +50,7 @@
 #define DMACR_TM(x)	((x) & 0xf)
 
 struct imx_fb_videomode {
-	struct fb_videomode mode;
+	struct fb_videomode *mode;
 	u32 pcr;
 	unsigned char	bpp;
 };
drivers/video/imx.c +3 -3
index ac51858..6ccd77e 100644
@@ -555,9 +555,9 @@ static int imxfb_probe(struct device_d *dev)
 	fbi->enable = pdata->enable;
 	fbi->dev = dev;
 	info->priv = fbi;
-	info->mode = &pdata->mode->mode;
-	info->xres = pdata->mode->mode.xres;
-	info->yres = pdata->mode->mode.yres;
+	info->mode = pdata->mode->mode;
+	info->xres = pdata->mode->mode->xres;
+	info->yres = pdata->mode->mode->yres;
 	info->bits_per_pixel = pdata->mode->bpp;
 	info->fbops = &imxfb_ops;
 
Signature · 9 lines
Pengutronix e.K.                              | Juergen Beisert             |
Linux Solutions for Science and Industry      | Phone: +49-8766-939 228     |
Vertretung Sued/Muenchen, Germany             | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686              | http://www.pengutronix.de/  |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Signature · 9 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
#2 lore raw

Hi Sascha,

Quoted 7 lines · Sascha Hauer
Quoted 6 lines · Juergen Beisert

commit 4ac682bf08b61708bc432c48e58a6d1cf9ea3832

Author: Juergen Beisert <[email protected]>
Date:   Sat Oct 16 15:32:06 2010 +0200

imx: Separate framebuffer platformdata and the videomode

Quoted 8 lines
Quoted 5 lines

This patch separates the imx platformdata and its videomode in two
structures, in order to support more than one defined videomode in the boardfile. This is intended to support runtime videomode selection later on. It also uses now the same videomode setup style than the imx-fpu based systems (like the i.MX35).

Multiple displays can have different bpp/pcr values. Shouldn't we build an array of imx_fb_videomode instead?

At this point of time its not necessary, because still only one display is supported (BTW: The 'bpp' value seems not display related, it a feature of the framebuffer only).
But in future we need a solution for videomode and driver specific data. Maybe we could add a private void pointer into the "struct fb_videomode" for this purpose?

When I release my "runtime videomode initialization" patch stack, we could discuss where to store such special information.

jbe

Signature · 9 lines
Pengutronix e.K.                              | Juergen Beisert             |
Linux Solutions for Science and Industry      | Phone: +49-8766-939 228     |
Vertretung Sued/Muenchen, Germany             | Fax:   +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686              | http://www.pengutronix.de/  |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox