Add GPIO support and GPIO setup features to the S3C processors
Subsystems (2)
PATCH 1/1 Add GPIO support and GPIO setup features to the S3C processors
From: Juergen Beisert <[email protected]>
Subject: Add GPIO support and GPIO setup features to the S3C processors
This patch adds genetic GPIO support to all S3C2440 processor based systems. Also it adds definitions to setup the pin multiplexer in a way the other architectures do.
Note: Tested on a S3C2440 based system only. But should work on an S3C2410, too.
--- arch/arm/Kconfig | 1 arch/arm/mach-s3c24xx/Makefile | 2 arch/arm/mach-s3c24xx/gpio-s3c24x0.c | 170 ++++++++ arch/arm/mach-s3c24xx/include/mach/gpio.h | 31 + arch/arm/mach-s3c24xx/include/mach/iomux-s3c24x0.h | 426 +++++++++++++++++++++ 5 files changed, 629 insertions(+), 1 deletion(-)
arch/arm/mach-s3c24xx/gpio-s3c24x0.c new file +170 -0
@@ -0,0 +1,170 @@ +/* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#include <common.h> +#include <errno.h> +#include <asm/io.h> +#include <mach/s3c24x0-iomap.h> +#include <mach/gpio.h> + +static const unsigned char group_offset[] = +{ +0x00 ,/* GPA */ +0x10 ,/* GPB */ +0x20 ,/* GPC */ +0x30 ,/* GPD */ +0x40 ,/* GPE */ +0x50 ,/* GPF */ +0x60 ,/* GPG */ +0x70 ,/* GPH */ +#ifdef CONFIG_CPU_S3C2440 +0xd0 ,/* GPJ */ +#endif +}; + +void gpio_set_value (unsigned gpio,int value) +{ +unsigned group = gpio >>5 ; +unsigned bit = gpio %32 ; +unsigned offset; +uint32_t reg; + + offset = group_offset[group]; + + reg =readl (GPADAT + offset); + reg &= ~(1 << bit); + reg |= (!!value) << bit; +writel (reg,GPADAT + offset); +} + +int gpio_direction_input (unsigned gpio) +{ +unsigned group = gpio >>5 ; +unsigned bit = gpio %32 ; +unsigned offset; +uint32_t reg; + + offset = group_offset[group]; + + reg =readl (GPACON + offset); + reg &= ~(0x3 << (bit <<1 )); +writel (reg,GPACON + offset); + +return 0 ; +} + + +int gpio_direction_output (unsigned gpio,int value) +{ +unsigned group = gpio >>5 ; +unsigned bit = gpio %32 ; +unsigned offset; +uint32_t reg; + + offset = group_offset[group]; + +/* value */ + reg =readl (GPADAT + offset); + reg &= ~(1 << bit); + reg |= (!!value) << bit; +writel (reg,GPADAT + offset); + +/* direction */ +if (group ==0 ) {/* GPA is special */ + reg =readl (GPACON ); + reg &= ~(1 << bit); +writel (reg,GPACON ); + }else { + reg =readl (GPACON + offset); + reg &= ~(0x3 << (bit <<1 )); + reg |=0x1 << (bit <<1 ); +writel (reg,GPACON + offset); + } + +return 0 ; +} + +int gpio_get_value (unsigned gpio) +{ +unsigned group = gpio >>5 ; +unsigned bit = gpio %32 ; +unsigned offset; +uint32_t reg; + + offset = group_offset[group]; + +/* value */ + reg =readl (GPADAT + offset); + +return !!(reg & (1 << bit)); +} + +void s3c_gpio_mode (unsigned gpio_mode) +{ +unsigned group, func, bit, offset, gpio; +uint32_t reg; + + group =GET_GROUP (gpio_mode); + func =GET_FUNC (gpio_mode); + bit =GET_BIT (gpio_mode); + gpio =GET_GPIO_NO (gpio_mode); + +if (group ==0 ) { +/* GPA is special */ +switch (func) { +case 0 :/* GPIO input */ +pr_debug ("Cannot set GPA pin to GPIO input\n" ); +break ; +case 1 :/* GPIO output */ +gpio_direction_output (bit,GET_GPIOVAL (gpio_mode)); +break ; +default : + reg =readl (GPACON ); + reg |=1 << bit; +writel (reg,GPACON ); +break ; + } +return ; + } + + offset = group_offset[group]; + +if (PU_PRESENT (gpio_mode)) { + reg =readl (GPACON + offset +8 ); +if (GET_PU (gpio_mode)) + reg |= (1 << bit);/* set means _disabled_ */ +else + reg &= ~(1 << bit); +writel (reg,GPACON + offset +8 ); + } + +switch (func) { +case 0 :/* input */ +gpio_direction_input (gpio); +break ; +case 1 :/* output */ +gpio_direction_output (gpio,GET_GPIOVAL (gpio_mode)); +break ; +case 2 :/* function one */ +case 3 :/* function two */ + reg =readl (GPACON + offset); + reg &= ~(0x3 << (bit <<1 )); + reg |= func << (bit <<1 ); +writel (reg,GPACON + offset); +break ; + } +}
arch/arm/mach-s3c24xx/include/mach/gpio.h new file +31 -0
@@ -0,0 +1,31 @@ +/* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#ifndef __ASM_MACH_GPIO_H +#define __ASM_MACH_GPIO_H + +#if defined(CONFIG_CPU_S3C2440 ) || defined(CONFIG_CPU_S3C2410 ) +# include <mach/iomux-s3c24x0.h> +#endif + +void gpio_set_value (unsigned ,int ); +int gpio_direction_input (unsigned ); +int gpio_direction_output (unsigned ,int ); +int gpio_get_value (unsigned ); +void s3c_gpio_mode (unsigned ); + +#endif /* __ASM_MACH_GPIO_H */
arch/arm/mach-s3c24xx/include/mach/iomux-s3c24x0.h new file +426 -0
426 lines not on this page · raw message
arch/arm/mach-s3c24xx/Makefile +1 -1
@@ -1,2 +1,2 @@ -obj-y += generic.o +obj-y += generic.o gpio-s3c24x0.o obj-$(CONFIG_S3C24XX_LOW_LEVEL_INIT) += lowlevel-init.o
arch/arm/Kconfig +1 -0
@@ -59,6 +59,7 @@ config ARCH_OMAP config ARCH_S3C24xx bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443" select CPU_ARM920T + select GENERIC_GPIO endchoice
_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox
Quoted 98 lines · Juergen Beisert
From: Juergen Beisert <[email protected]>
Subject: Add GPIO support and GPIO setup features to the S3C processorsThis patch adds genetic GPIO support to all S3C2440 processor based systems. Also it adds definitions to setup the pin multiplexer in a way the other architectures do.
Note: Tested on a S3C2440 based system only. But should work on an S3C2410, too.
Signed-off-by Juergen Beisert <[email protected]>--- arch/arm/Kconfig | 1 arch/arm/mach-s3c24xx/Makefile | 2 arch/arm/mach-s3c24xx/gpio-s3c24x0.c | 170 ++++++++ arch/arm/mach-s3c24xx/include/mach/gpio.h | 31 + arch/arm/mach-s3c24xx/include/mach/iomux-s3c24x0.h | 426 +++++++++++++++++++++ 5 files changed, 629 insertions(+), 1 deletion(-)Index:
barebox-2010.10.0/arch/arm/mach-s3c24xx/gpio-s3c24x0.c
===================================================================arch/arm/mach-s3c24xx/gpio-s3c24x0.c new file +74
-0@@ -0,0 +1,170 @@ +/* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#include <common.h> +#include <errno.h> +#include <asm/io.h> +#include <mach/s3c24x0-iomap.h> +#include <mach/gpio.h> + +static const unsigned char group_offset[] = +{ +0x00 ,/* GPA */ +0x10 ,/* GPB */ +0x20 ,/* GPC */ +0x30 ,/* GPD */ +0x40 ,/* GPE */ +0x50 ,/* GPF */ +0x60 ,/* GPG */ +0x70 ,/* GPH */ +#ifdef CONFIG_CPU_S3C2440 +0xd0 ,/* GPJ */ +#endif +}; + +void gpio_set_value (unsigned gpio,int value) +{ +unsigned group = gpio >>5 ; +unsigned bit = gpio %32 ; +unsigned offset; +uint32_t reg; + + offset = group_offset[group]; + + reg =readl (GPADAT + offset); + reg &= ~(1 << bit); + reg |= (!!value) << bit; +writel (reg,GPADAT + offset); +} + +int gpio_direction_input (unsigned gpio) +{ +unsigned group = gpio >>5 ; +unsigned bit = gpio %32 ; +unsigned offset; +uint32_t reg; + + offset = group_offset[group]; + + reg =readl (GPACON + offset); + reg &= ~(0x3 << (bit <<1 )); +writel (reg,GPACON + offset); + +return 0 ; +} + + +int gpio_direction_output (unsigned gpio,int value) +{ +unsigned group = gpio >>5 ; +unsigned bit = gpio %32 ;
arch/arm/mach-s3c24xx/gpio-s3c24x0.c line 84
Quoted 10 lines
arch/arm/mach-s3c24xx/gpio-s3c24x0.c new file +10
-0+unsigned offset; +uint32_t reg; + + offset = group_offset[group]; + +/* value */ + reg =readl (GPADAT + offset); + reg &= ~(1 << bit); + reg |= (!!value) << bit; +writel (reg,GPADAT + offset);
You can call gpio_set_value here.
arch/arm/mach-s3c24xx/gpio-s3c24x0.c line 91
Quoted 7 lines
arch/arm/mach-s3c24xx/gpio-s3c24x0.c new file +7
-0+ +/* direction */ +if (group ==0 ) {/* GPA is special */ + reg =readl (GPACON ); + reg &= ~(1 << bit); +writel (reg,GPACON ); + }else {
gpio_direction_input does not have this special handling. Is this correct?
Quoted 9 lines
arch/arm/mach-s3c24xx/gpio-s3c24x0.c new file +9
-0+ reg =readl (GPACON + offset); + reg &= ~(0x3 << (bit <<1 )); + reg |=0x1 << (bit <<1 ); +writel (reg,GPACON + offset); + } + +return 0 ; +} +
Signature · 9 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
Hi Sascha,
Quoted 104 lines · Sascha Hauer
Quoted 103 lines · Juergen Beisert
From: Juergen Beisert <[email protected]>
Subject: Add GPIO support and GPIO setup features to the S3C processorsThis patch adds genetic GPIO support to all S3C2440 processor based systems. Also it adds definitions to setup the pin multiplexer in a way the other architectures do.
Note: Tested on a S3C2440 based system only. But should work on an S3C2410, too.
Signed-off-by Juergen Beisert <[email protected]>--- arch/arm/Kconfig | 1 arch/arm/mach-s3c24xx/Makefile | 2 arch/arm/mach-s3c24xx/gpio-s3c24x0.c | 170 ++++++++ arch/arm/mach-s3c24xx/include/mach/gpio.h | 31 + arch/arm/mach-s3c24xx/include/mach/iomux-s3c24x0.h | 426+++++++++++++++++++++ 5 files changed, 629 insertions(+), 1 deletion(-)
Index:
barebox-2010.10.0/arch/arm/mach-s3c24xx/gpio-s3c24x0.c
===================================================================arch/arm/mach-s3c24xx/gpio-s3c24x0.c new file +78
-0@@ -0,0 +1,170 @@ +/* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#include <common.h> +#include <errno.h> +#include <asm/io.h> +#include <mach/s3c24x0-iomap.h> +#include <mach/gpio.h> + +static const unsigned char group_offset[] = +{ +0x00 ,/* GPA */ +0x10 ,/* GPB */ +0x20 ,/* GPC */ +0x30 ,/* GPD */ +0x40 ,/* GPE */ +0x50 ,/* GPF */ +0x60 ,/* GPG */ +0x70 ,/* GPH */ +#ifdef CONFIG_CPU_S3C2440 +0xd0 ,/* GPJ */ +#endif +}; + +void gpio_set_value (unsigned gpio,int value) +{ +unsigned group = gpio >>5 ; +unsigned bit = gpio %32 ; +unsigned offset; +uint32_t reg; + + offset = group_offset[group]; + + reg =readl (GPADAT + offset); + reg &= ~(1 << bit); + reg |= (!!value) << bit; +writel (reg,GPADAT + offset); +} + +int gpio_direction_input (unsigned gpio) +{ +unsigned group = gpio >>5 ; +unsigned bit = gpio %32 ; +unsigned offset; +uint32_t reg; + + offset = group_offset[group]; + + reg =readl (GPACON + offset); + reg &= ~(0x3 << (bit <<1 )); +writel (reg,GPACON + offset); + +return 0 ; +} + + +int gpio_direction_output (unsigned gpio,int value) +{ +unsigned group = gpio >>5 ; +unsigned bit = gpio %32 ; +unsigned offset; +uint32_t reg; + + offset = group_offset[group];
Quoted 8 lines
arch/arm/mach-s3c24xx/gpio-s3c24x0.c line 84
Quoted 6 lines
arch/arm/mach-s3c24xx/gpio-s3c24x0.c new file +6
-0+ +/* value */ + reg =readl (GPADAT + offset); + reg &= ~(1 << bit); + reg |= (!!value) << bit; +writel (reg,GPADAT + offset);You can call
gpio_set_valuehere.
Hmm, right. Will change it.
Quoted 10 lines
arch/arm/mach-s3c24xx/gpio-s3c24x0.c line 91
Quoted 7 lines
arch/arm/mach-s3c24xx/gpio-s3c24x0.c new file +7
-0+ +/* direction */ +if (group ==0 ) {/* GPA is special */ + reg =readl (GPACON ); + reg &= ~(1 << bit); +writel (reg,GPACON ); + }else {
gpio_direction_inputdoes not have this special handling. Is this correct?
The GPA pin group can only be GPIO outputs *or* their native feature enabled (addressbus lines for example). But you are right, I should catch this error if someone tries to read from a GPA group pin.
jbe
Signature · 9 lines
Pengutronix e.K. | Juergen Beisert | Linux Solutions for Science and Industry | Phone: +49-8766-939 228 | Vertretung Sued/Muenchen, Germany | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de/ | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox
PATCH v2 1/1 Add GPIO support and GPIO setup features to the S3C processors
From: Juergen Beisert <[email protected]>
Subject: [PATCH v2] Add GPIO support and GPIO setup features to the S3C processors
This patch adds genetic GPIO support to all S3C2440 processor based systems. Also it adds definitions to setup the pin multiplexer in a way the other architectures do.
Note: Tested on a S3C2440 based system only. But should work on an S3C2410, too.
--- arch/arm/Kconfig | 1 arch/arm/mach-s3c24xx/Makefile | 2 arch/arm/mach-s3c24xx/gpio-s3c24x0.c | 169 ++++++++ arch/arm/mach-s3c24xx/include/mach/gpio.h | 31 + arch/arm/mach-s3c24xx/include/mach/iomux-s3c24x0.h | 426 +++++++++++++++++++++ 5 files changed, 628 insertions(+), 1 deletion(-)
arch/arm/mach-s3c24xx/gpio-s3c24x0.c new file +169 -0
@@ -0,0 +1,169 @@ +/* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#include <common.h> +#include <errno.h> +#include <asm/io.h> +#include <mach/s3c24x0-iomap.h> +#include <mach/gpio.h> + +static const unsigned char group_offset[] = +{ +0x00 ,/* GPA */ +0x10 ,/* GPB */ +0x20 ,/* GPC */ +0x30 ,/* GPD */ +0x40 ,/* GPE */ +0x50 ,/* GPF */ +0x60 ,/* GPG */ +0x70 ,/* GPH */ +#ifdef CONFIG_CPU_S3C2440 +0xd0 ,/* GPJ */ +#endif +}; + +void gpio_set_value (unsigned gpio,int value) +{ +unsigned group = gpio >>5 ; +unsigned bit = gpio %32 ; +unsigned offset; +uint32_t reg; + + offset = group_offset[group]; + + reg =readl (GPADAT + offset); + reg &= ~(1 << bit); + reg |= (!!value) << bit; +writel (reg,GPADAT + offset); +} + +int gpio_direction_input (unsigned gpio) +{ +unsigned group = gpio >>5 ; +unsigned bit = gpio %32 ; +unsigned offset; +uint32_t reg; + + offset = group_offset[group]; + + reg =readl (GPACON + offset); + reg &= ~(0x3 << (bit <<1 )); +writel (reg,GPACON + offset); + +return 0 ; +} + + +int gpio_direction_output (unsigned gpio,int value) +{ +unsigned group = gpio >>5 ; +unsigned bit = gpio %32 ; +unsigned offset; +uint32_t reg; + + offset = group_offset[group]; + +/* value */ +gpio_set_value (gpio,value); +/* direction */ +if (group ==0 ) {/* GPA is special */ + reg =readl (GPACON ); + reg &= ~(1 << bit); +writel (reg,GPACON ); + }else { + reg =readl (GPACON + offset); + reg &= ~(0x3 << (bit <<1 )); + reg |=0x1 << (bit <<1 ); +writel (reg,GPACON + offset); + } + +return 0 ; +} + +int gpio_get_value (unsigned gpio) +{ +unsigned group = gpio >>5 ; +unsigned bit = gpio %32 ; +unsigned offset; +uint32_t reg; + +if (group ==0 )/* GPA is special: no input mode available */ +return -ENODEV ; + + offset = group_offset[group]; + +/* value */ + reg =readl (GPADAT + offset); + +return !!(reg & (1 << bit)); +} + +void s3c_gpio_mode (unsigned gpio_mode) +{ +unsigned group, func, bit, offset, gpio; +uint32_t reg; + + group =GET_GROUP (gpio_mode); + func =GET_FUNC (gpio_mode); + bit =GET_BIT (gpio_mode); + gpio =GET_GPIO_NO (gpio_mode); + +if (group ==0 ) { +/* GPA is special */ +switch (func) { +case 0 :/* GPIO input */ +pr_debug ("Cannot set GPA pin to GPIO input\n" ); +break ; +case 1 :/* GPIO output */ +gpio_direction_output (bit,GET_GPIOVAL (gpio_mode)); +break ; +default : + reg =readl (GPACON ); + reg |=1 << bit; +writel (reg,GPACON ); +break ; + } +return ; + } + + offset = group_offset[group]; + +if (PU_PRESENT (gpio_mode)) { + reg =readl (GPACON + offset +8 ); +if (GET_PU (gpio_mode)) + reg |= (1 << bit);/* set means _disabled_ */ +else + reg &= ~(1 << bit); +writel (reg,GPACON + offset +8 ); + } + +switch (func) { +case 0 :/* input */ +gpio_direction_input (gpio); +break ; +case 1 :/* output */ +gpio_direction_output (gpio,GET_GPIOVAL (gpio_mode)); +break ; +case 2 :/* function one */ +case 3 :/* function two */ + reg =readl (GPACON + offset); + reg &= ~(0x3 << (bit <<1 )); + reg |= func << (bit <<1 ); +writel (reg,GPACON + offset); +break ; + } +}
arch/arm/mach-s3c24xx/include/mach/gpio.h new file +31 -0
@@ -0,0 +1,31 @@ +/* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#ifndef __ASM_MACH_GPIO_H +#define __ASM_MACH_GPIO_H + +#if defined(CONFIG_CPU_S3C2440 ) || defined(CONFIG_CPU_S3C2410 ) +# include <mach/iomux-s3c24x0.h> +#endif + +void gpio_set_value (unsigned ,int ); +int gpio_direction_input (unsigned ); +int gpio_direction_output (unsigned ,int ); +int gpio_get_value (unsigned ); +void s3c_gpio_mode (unsigned ); + +#endif /* __ASM_MACH_GPIO_H */
arch/arm/mach-s3c24xx/include/mach/iomux-s3c24x0.h new file +426 -0
426 lines not on this page · raw message
arch/arm/mach-s3c24xx/Makefile +1 -1
@@ -1,2 +1,2 @@ -obj-y += generic.o +obj-y += generic.o gpio-s3c24x0.o obj-$(CONFIG_S3C24XX_LOW_LEVEL_INIT) += lowlevel-init.o
arch/arm/Kconfig +1 -0
@@ -59,6 +59,7 @@ config ARCH_OMAP config ARCH_S3C24xx bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443" select CPU_ARM920T + select GENERIC_GPIO endchoice
Signature · 9 lines
Pengutronix e.K. | Juergen Beisert | Linux Solutions for Science and Industry | Phone: +49-8766-939 228 | Vertretung Sued/Muenchen, Germany | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de/ | _______________________________________________ barebox mailing list [email protected] http://lists.infradead.org/mailman/listinfo/barebox