Skip to contentSkip to conversation

Synaptics TM1217 Touchscreen Controller driver

PATCH New Alan Cox 1 participant 1 message Oct 22, 2010 Staging

lore
Share & tools
lore

Alan Cox

author
#0 lore raw

PATCH 1/1 Synaptics TM1217 Touchscreen Controller driver

From: Ramesh Agarwal <[email protected]>

This is submitted as a staging driver because there is a more generic driver "on the way" for all these devices and has been for some time. The intent is that as soon as the general drivers are in the mainstream this one will get any leftovers integrated and then be dumped. Until this unspecified future data at least people can actually use their hardware.

As its interface is simply input layer we can do that without pain.

Some clean up by Alan Cox
- Extract gpio support and IRQ support more sanely
- Tidying

[avoid deference NULL ts if kzalloc fails]
[finger_touched may be used uninitialized]
[fix missing sync which confused twm]

---

 drivers/staging/Kconfig                    |    2 
 drivers/staging/Makefile                   |    1 
 drivers/staging/cptm1217/Kconfig           |   11 
 drivers/staging/cptm1217/Makefile          |    2 
 drivers/staging/cptm1217/TODO              |    5 
 drivers/staging/cptm1217/clearpad_tm1217.c |  675 ++++++++++++++++++++++++++++
 drivers/staging/cptm1217/cp_tm1217.h       |    9 
 7 files changed, 705 insertions(+), 0 deletions(-)
 create mode 100644 drivers/staging/cptm1217/Kconfig
 create mode 100644 drivers/staging/cptm1217/Makefile
 create mode 100644 drivers/staging/cptm1217/TODO
 create mode 100644 drivers/staging/cptm1217/clearpad_tm1217.c
 create mode 100644 drivers/staging/cptm1217/cp_tm1217.h
drivers/staging/Kconfig +2 -0
index f9c9c8a..815e2a2 100644
@@ -177,5 +177,7 @@ source "drivers/staging/intel_sst/Kconfig"
 
 source "drivers/staging/speakup/Kconfig"
 
+source "drivers/staging/cptm1217/Kconfig"
+
 endif # !STAGING_EXCLUDE_BUILD
 endif # STAGING
drivers/staging/Makefile +1 -0
index a85074f..8507d31 100644
@@ -69,3 +69,4 @@ obj-$(CONFIG_BCM_WIMAX)	+= bcm/
 obj-$(CONFIG_FT1000)		+= ft1000/
 obj-$(CONFIG_SND_INTEL_SST)		+= intel_sst/
 obj-$(CONFIG_SPEAKUP)	+= speakup/
+obj-$(CONFIG_TOUCHSCREEN_CLEARPAD_TM1217)	+= cptm1217/
drivers/staging/cptm1217/Kconfig new file +11 -0
new file mode 100644
index 0000000..f90545d
@@ -0,0 +1,11 @@
+config TOUCHSCREEN_CLEARPAD_TM1217
+	tristate "Synaptics Clearpad TM1217"
+	depends on I2C
+	depends on GPIOLIB
+	help
+	  Say Y here if you have a Synaptics Clearpad TM1217 Controller
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called clearpad_tm1217.
drivers/staging/cptm1217/Makefile new file +2 -0
new file mode 100644
index 0000000..8961faf
@@ -0,0 +1,2 @@
+obj-$(CONFIG_TOUCHSCREEN_CLEARPAD_TM1217)	+= clearpad_tm1217.o
+
drivers/staging/cptm1217/TODO new file +5 -0
new file mode 100644
index 0000000..3039224
@@ -0,0 +1,5 @@
+- Wait for the official upstream general clearpad drivers as promised over
+  the past few months
+- Merge any device support needed from this driver into it
+- Delete this driver
+
drivers/staging/cptm1217/clearpad_tm1217.c new file +675 -0

675 lines not on this page · raw message

drivers/staging/cptm1217/cp_tm1217.h new file +9 -0
new file mode 100644
index 0000000..a0ce31d
@@ -0,0 +1,9 @@
+#ifndef __LINUX_I2C_CP_TM1217_H
+#define __LINUX_I2C_CP_TM1217_H
+
+struct cp_tm1217_platform_data
+{
+	int gpio;		/* If not set uses the IRQ resource 0 */
+};
+
+#endif