Skip to contentSkip to conversation

RTC driver for PT7C4338 chip.

PATCH Superseded Priyanka Jain 2 participants 2 messages Oct 26, 2010 Real time clock (RTC)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 RTC driver for PT7C4338 chip.

PT7C4338 chip is manufactured by Pericom Technology Inc. It is a serial real-time clock which provides:
1)Low-power clock/calendar.
2)Programmable square-wave output.
It has 56 bytes of nonvolatile RAM.

Freescale P1010RDB uses PT7C4338 as RTC.

---
 drivers/rtc/Makefile   |    1 +
 drivers/rtc/pt7c4338.c |  144 ++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 145 insertions(+), 0 deletions(-)
 create mode 100644 drivers/rtc/pt7c4338.c
drivers/rtc/Makefile +1 -0
index 98734db..bbf9a7e 100644
@@ -57,6 +57,7 @@ COBJS-$(CONFIG_RTC_MPC5200) += mpc5xxx.o
 COBJS-$(CONFIG_RTC_MPC8xx) += mpc8xx.o
 COBJS-$(CONFIG_RTC_PCF8563) += pcf8563.o
 COBJS-$(CONFIG_RTC_PL031) += pl031.o
+COBJS-$(CONFIG_RTC_PT7C4338) += pt7c4338.o
 COBJS-$(CONFIG_RTC_RS5C372A) += rs5c372.o
 COBJS-$(CONFIG_RTC_RTC4543) += rtc4543.o
 COBJS-$(CONFIG_RTC_RX8025) += rx8025.o
drivers/rtc/pt7c4338.c new file +144 -0

144 lines not on this page · raw message

Signature · 1 line
1.6.5.6
#1 lore raw

PATCH v3 1/1 RTC driver for PT7C4338 chip.

Dear Priyanka Jain,

Quoted 8 lines · In message <[email protected]> you…

PT7C4338 chip is manufactured by Pericom Technology Inc. It is a serial real-time clock which provides:
1)Low-power clock/calendar.
2)Programmable square-wave output.
It has 56 bytes of nonvolatile RAM.

Freescale P1010RDB uses PT7C4338 as RTC.

Quoted 7 lines
---
 drivers/rtc/Makefile   |    1 +
 drivers/rtc/pt7c4338.c |  144 ++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 145 insertions(+), 0 deletions(-)
 create mode 100644 drivers/rtc/pt7c4338.c

Why are you posting a new version? What was changed compared to v2?

Why do you ignore the patch posting rules as explained for example here:
http://www.denx.de/wiki/view/U-Boot/Patches#Sending_updated_patch_versions
?

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Too many people are ready to carry the stool when the piano needs  to
be moved.