VoVPN-GW_100MHz: drop unsupported board configuration
PATCH 1/1 VoVPN-GW_100MHz: drop unsupported board configuration
The 100MHz configuation of the VoVPN-GW has never been supported, so drop it now.
---
This commit shows a problem with the concept of the "README.scrapyard"
file: I'm supposed to enter the commit ID for the commit I'm just about to check in; this cannot work. Hope we remember to clean this up when making the next entries...
Anybody having any better ideas? Some clever git attributes trick?
boards.cfg | 1 - doc/README.scrapyard | 1 + 2 files changed, 1 insertions(+), 1 deletions(-)
boards.cfg +0 -1
@@ -524,7 +524,6 @@ MPC8272ADS powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS PQ2FADS-VR powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,8260_CLKIN=66000000 PQ2FADS-ZU powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS PQ2FADS_lowboot powerpc mpc8260 mpc8260ads freescale - MPC8260ADS:ADSTYPE=CONFIG_SYS_PQ2FADS,SYS_TEXT_BASE=0xFF800000 -VoVPN-GW_100MHz powerpc mpc8260 vovpn-gw funkwerk - VoVPN-GW:CLKIN_100MHz VoVPN-GW_66MHz powerpc mpc8260 vovpn-gw funkwerk - VoVPN-GW:CLKIN_66MHz MPC8308RDB powerpc mpc83xx mpc8308rdb freescale MPC8323ERDB powerpc mpc83xx mpc8323erdb freescale
doc/README.scrapyard +1 -0
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for... Board Arch CPU removed Commit last known maintainer/contact ============================================================================= +VoVPN-GW_100MHz powerpc MPC8260 - 2010-10-24 Juergen Selent <[email protected]> NC650 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <[email protected]> CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Denk <[email protected]> logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl <[email protected]>
Signature · 1 line
1.7.2.3
PATCH 1/1 VoVPN-GW_100MHz: drop unsupported board configuration
Quoted 4 lines · Wolfgang Denk
The 100MHz configuation of the VoVPN-GW has never been supported, so drop it now.
Signed-off-by Wolfgang Denk <[email protected]>
Quoted 9 lines
---
This commit shows a problem with the concept of the "README.scrapyard"
file: I'm supposed to enter the commit ID for the commit I'm just about to check in; this cannot work. Hope we remember to clean this up when making the next entries...Anybody having any better ideas? Some clever git attributes trick?
How about documenting a git command line for showing when a particular set of lines is added?
e.g.
git blame doc/README.scrapyard
This will show the revision at which a particular line was introduced, and will therefore provide a guide to when the feature was removed.
Include the cmdline at the top of the scrapyard file, and it should be fairly self-evident, I would hope.
Rogan
PATCH 1/1 VoVPN-GW_100MHz: drop unsupported board configuration
In reply to Wolfgang DenkQuoted 11 lines · In message <[email protected]> you wrote:
The 100MHz configuation of the VoVPN-GW has never been supported, so drop it now.
Signed-off-by Wolfgang Denk <[email protected]>---
This commit shows a problem with the concept of the "README.scrapyard"
file: I'm supposed to enter the commit ID for the commit I'm just about to check in; this cannot work. Hope we remember to clean this up when making the next entries...
Quoted 5 lines
Anybody having any better ideas? Some clever git attributes trick?
boards.cfg | 1 - doc/README.scrapyard | 1 + 2 files changed, 1 insertions(+), 1 deletions(-)
Aoolied, thanks.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de I'd rather be led to hell than managed to heaven.
PATCH 1/1 VoVPN-GW_100MHz: drop unsupported board configuration
In reply to Wolfgang Denk[looks like this message got lost, resending]
Quoted 4 lines · Wolfgang Denk
The 100MHz configuation of the VoVPN-GW has never been supported, so drop it now.
Signed-off-by Wolfgang Denk <[email protected]>
Quoted 9 lines
---
This commit shows a problem with the concept of the "README.scrapyard"
file: I'm supposed to enter the commit ID for the commit I'm just about to check in; this cannot work. Hope we remember to clean this up when making the next entries...Anybody having any better ideas? Some clever git attributes trick?
How about documenting a git command line for showing when a particular set of lines is added?
e.g.
git blame doc/README.scrapyard
This will show the revision at which a particular line was introduced, and will therefore provide a guide to when the feature was removed.
Include the cmdline at the top of the scrapyard file, and it should be fairly self-evident, I would hope.
Rogan
PATCH 1/1 VoVPN-GW_100MHz: drop unsupported board configuration
Dear Rogan Dawes,
Quoted 1 line · In message <[email protected]> you wrote:
[looks like this message got lost, resending]
No, it was not lost, just unreplied.
Quoted 2 lines
Include the cmdline at the top of the scrapyard file, and it should be fairly self-evident, I would hope.
Agreed that this is one of the possible workarounds.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de If all the Chinese simultaneously jumped into the Pacific off a 10 foot platform erected 10 feet off their coast, it would cause a tidal wave that would destroy everything in this country west of Nebraska.
PATCH 1/1 VoVPN-GW_100MHz: drop unsupported board configuration
Quoted 6 lines · Wolfgang Denk
Dear Rogan Dawes,
Quoted 1 line · In message <[email protected]> you wrote:
[looks like this message got lost, resending]
No, it was not lost, just unreplied.
Ok, I didn't see it on gmane, so I assumed it had gone astray.
Rogan