Skip to contentSkip to conversation

env_sf: updated to the new environment code

PATCH New Stefano Babic 3 participants 3 messages Oct 27, 2010 – Oct 28, 2010

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 env_sf: updated to the new environment code

Functions to store/retrieve the environment from a SPI flash was not updated to the new environment code. The non-redundant case was
not working correctly, reporting ""Environment SPI flash not initialized" and the code was not compiled clean in the redundant case.

The patch fixes these issue and makes the code more coherent with other environment storage (nand, flash).

---
 common/env_sf.c |  172 +++++++++++++++++++++++++------------------------------
 1 files changed, 77 insertions(+), 95 deletions(-)
common/env_sf.c +77 -95
index fb0c39b..a597b24 100644
@@ -51,7 +51,7 @@ static ulong env_new_offset = CONFIG_ENV_OFFSET_REDUND;
 
 #define ACTIVE_FLAG   1
 #define OBSOLETE_FLAG 0
-#endif /* CONFIG_ENV_ADDR_REDUND */
+#endif /* CONFIG_ENV_OFFSET_REDUND */
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -69,13 +69,6 @@ uchar env_get_char_spec(int index)
 }
 
 #if defined(CONFIG_ENV_OFFSET_REDUND)
-void swap_env(void)
-{
-	ulong tmp_offset = env_offset;
-
-	env_offset = env_new_offset;
-	env_new_offset = tmp_offset;
-}
 
 int saveenv(void)
 {
@@ -89,8 +82,13 @@ int saveenv(void)
 	char	flag = OBSOLETE_FLAG, new_flag = ACTIVE_FLAG;
 
 	if (!env_flash) {
-		puts("Environment SPI flash not initialized\n");
-		return 1;
+		env_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS,
+			CONFIG_ENV_SPI_CS,
+			CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+		if (!env_flash) {
+			set_default_env("!spi_flash_probe() failed");
+			return 1;
+		}
 	}
 
 	res = (char *)&env_new.data;
@@ -102,6 +100,14 @@ int saveenv(void)
 	env_new.crc   = crc32(0, env_new.data, ENV_SIZE);
 	env_new.flags = ACTIVE_FLAG;
 
+	if (gd->env_valid == 1) {
+		env_new_offset = CONFIG_ENV_OFFSET_REDUND;
+		env_offset = CONFIG_ENV_OFFSET;
+	} else {
+		env_new_offset = CONFIG_ENV_OFFSET;
+		env_offset = CONFIG_ENV_OFFSET_REDUND;
+	}
+
 	/* Is the sector larger than the env (i.e. embedded) */
 	if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) {
 		saved_size = CONFIG_ENV_SECT_SIZE - CONFIG_ENV_SIZE;
@@ -130,27 +136,9 @@ int saveenv(void)
 		goto done;
 
 	puts("Writing to SPI flash...");
-	ret = spi_flash_write(env_flash,
-		env_new_offset + offsetof(env_t, data),
-		sizeof(env_new.data), env_new.data);
-	if (ret)
-		goto done;
-
-	ret = spi_flash_write(env_flash,
-		env_new_offset + offsetof(env_t, crc),
-		sizeof(env_new.crc), &env_new.crc);
-	if (ret)
-		goto done;
 
-	ret = spi_flash_write(env_flash,
-		env_offset + offsetof(env_t, flags),
-		sizeof(env_new.flags), &flag);
-	if (ret)
-		goto done;
-
-	ret = spi_flash_write(env_flash,
-		env_new_offset + offsetof(env_t, flags),
-		sizeof(env_new.flags), &new_flag);
+	ret = spi_flash_write(env_flash, env_new_offset,
+		CONFIG_ENV_SIZE, &env_new);
 	if (ret)
 		goto done;
 
@@ -161,11 +149,18 @@ int saveenv(void)
 			goto done;
 	}
 
-	swap_env();
+	ret = spi_flash_write(env_flash,
+		env_offset + offsetof(env_t, flags),
+		sizeof(env_new.flags), &flag);
+	if (ret)
+		goto done;
 
-	ret = 0;
 	puts("done\n");
 
+	gd->env_valid = (gd->env_valid == 2 ? 1 : 2);
+
+	printf("Valid environment: %d\n", gd->env_valid);
+
  done:
 	if (saved_buffer)
 		free(saved_buffer);
@@ -178,7 +173,7 @@ void env_relocate_spec(void)
 	int crc1_ok = 0, crc2_ok = 0;
 	env_t *tmp_env1 = NULL;
 	env_t *tmp_env2 = NULL;
-	env_t ep;
+	env_t *ep = NULL;
 	uchar flag1, flag2;
 	/* current_env is set only in case both areas are valid! */
 	int current_env = 0;
@@ -219,90 +214,57 @@ void env_relocate_spec(void)
 		flag2 = tmp_env2->flags;
 	}
 
-	if (!crc1_ok && !crc2_ok)
-		goto err_crc;
-	else if (crc1_ok && !crc2_ok) {
+	if (!crc1_ok && !crc2_ok) {
+		free(tmp_env1);
+		free(tmp_env2);
+		set_default_env("!bad CRC");
+		return;
+	} else if (crc1_ok && !crc2_ok) {
 		gd->env_valid = 1;
 		ep = tmp_env1;
 	} else if (!crc1_ok && crc2_ok) {
 		gd->env_valid = 1;
-		ep = tmp_env2;
-		swap_env();
 	} else if (flag1 == ACTIVE_FLAG && flag2 == OBSOLETE_FLAG) {
 		gd->env_valid = 1;
-		ep = tmp_env1;
 	} else if (flag1 == OBSOLETE_FLAG && flag2 == ACTIVE_FLAG) {
-		gd->env_valid = 1;
-		ep = tmp_env2;
-		swap_env();
+		gd->env_valid = 2;
 	} else if (flag1 == flag2) {
 		gd->env_valid = 2;
-		ep = tmp_env1;
-		current_env = 1;
 	} else if (flag1 == 0xFF) {
 		gd->env_valid = 2;
-		ep = tmp_env1;
-		current_env = 1;
 	} else {
 		/*
 		 * this differs from code in env_flash.c, but I think a sane
 		 * default path is desirable.
 		 */
 		gd->env_valid = 2;
-		ep = tmp_env2;
-		swap_env();
-		current_env = 2;
 	}
 
-	rc = env_import((char *)ep, 0);
-	if (!rc) {
-		error("Cannot import environment: errno = %d\n", errno);
-		goto out;
-	}
+	free(env_ptr);
 
-	if (current_env == 1) {
-		if (flag2 != OBSOLETE_FLAG) {
-			flag2 = OBSOLETE_FLAG;
-			spi_flash_write(env_flash,
-				env_new_offset + offsetof(env_t, flags),
-				sizeof(env_new.flags), &flag2);
-		}
-		if (flag1 != ACTIVE_FLAG) {
-			flag1 = ACTIVE_FLAG;
-			spi_flash_write(env_flash,
-				env_offset + offsetof(env_t, flags),
-				sizeof(env_new.flags), &flag1);
-		}
-	} else if (current_env == 2) {
-		if (flag1 != OBSOLETE_FLAG) {
-			flag1 = OBSOLETE_FLAG;
-			spi_flash_write(env_flash,
-				env_new_offset + offsetof(env_t, flags),
-				sizeof(env_new.flags), &flag1);
-		}
-		if (flag2 != ACTIVE_FLAG) {
-			flag2 = ACTIVE_FLAG;
-			spi_flash_write(env_flash,
-				env_offset + offsetof(env_t, flags),
-				sizeof(env_new.flags), &flag2);
-		}
-	}
-	if (gd->env_valid == 2) {
-		puts("*** Warning - some problems detected "
-			"reading environment; recovered successfully\n\n");
+	if (gd->env_valid == 1)
+		ep = tmp_env1;
+	else
+		ep = tmp_env2;
+
+	ret = env_import((char *)ep, 0);
+	if (!ret) {
+		error("Cannot import environment: errno = %d\n", errno);
+		set_default_env("env_import failed");
 	}
-	if (tmp_env1)
-		free(tmp_env1);
-	if (tmp_env2)
-		free(tmp_env2);
-	return;
 
 err_read:
 	spi_flash_free(env_flash);
 	env_flash = NULL;
 out:
+	if (tmp_env1)
+		free(tmp_env1);
+	if (tmp_env2)
+		free(tmp_env2);
 	free(tmp_env1);
 	free(tmp_env2);
+
+	return;
 }
 #else
 int saveenv(void)
@@ -311,10 +273,18 @@ int saveenv(void)
 	char *saved_buffer = NULL;
 	u32 sector = 1;
 	int ret;
+	env_t	env_new;
+	char	*res;
+	ssize_t	len;
 
 	if (!env_flash) {
-		puts("Environment SPI flash not initialized\n");
-		return 1;
+		env_flash = spi_flash_probe(CONFIG_ENV_SPI_BUS,
+			CONFIG_ENV_SPI_CS,
+			CONFIG_ENV_SPI_MAX_HZ, CONFIG_ENV_SPI_MODE);
+		if (!env_flash) {
+			set_default_env("!spi_flash_probe() failed");
+			return 1;
+		}
 	}
 
 	/* Is the sector larger than the env (i.e. embedded) */
@@ -326,7 +296,8 @@ int saveenv(void)
 			ret = 1;
 			goto done;
 		}
-		ret = spi_flash_read(env_flash, saved_offset, saved_size, saved_buffer);
+		ret = spi_flash_read(env_flash, saved_offset,
+			saved_size, saved_buffer);
 		if (ret)
 			goto done;
 	}
@@ -337,18 +308,29 @@ int saveenv(void)
 			sector++;
 	}
 
+	res = (char *)&env_new.data;
+	len = hexport('\0', &res, ENV_SIZE);
+	if (len < 0) {
+		error("Cannot export environment: errno = %d\n", errno);
+		goto done;
+	}
+	env_new.crc = crc32(0, env_new.data, ENV_SIZE);
+
 	puts("Erasing SPI flash...");
-	ret = spi_flash_erase(env_flash, CONFIG_ENV_OFFSET, sector * CONFIG_ENV_SECT_SIZE);
+	ret = spi_flash_erase(env_flash, CONFIG_ENV_OFFSET,
+		sector * CONFIG_ENV_SECT_SIZE);
 	if (ret)
 		goto done;
 
 	puts("Writing to SPI flash...");
-	ret = spi_flash_write(env_flash, CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, env_ptr);
+	ret = spi_flash_write(env_flash, CONFIG_ENV_OFFSET,
+		CONFIG_ENV_SIZE, &env_new);
 	if (ret)
 		goto done;
 
 	if (CONFIG_ENV_SECT_SIZE > CONFIG_ENV_SIZE) {
-		ret = spi_flash_write(env_flash, saved_offset, saved_size, saved_buffer);
+		ret = spi_flash_write(env_flash, saved_offset,
+			saved_size, saved_buffer);
 		if (ret)
 			goto done;
 	}
Signature · 1 line
1.7.1
#1 lore raw

PATCH 1/1 env_sf: updated to the new environment code

Dear Stefano Babic,

Quoted 5 lines · In message <[email protected]> you wrote:

Functions to store/retrieve the environment from a SPI flash was not updated to the new environment code. The non-redundant case was
not working correctly, reporting ""Environment SPI flash not initialized" and the code was not compiled clean in the redundant case.

Quoted 7 lines

The patch fixes these issue and makes the code more coherent with other environment storage (nand, flash).

---
 common/env_sf.c |  172 +++++++++++++++++++++++++------------------------------
 1 files changed, 77 insertions(+), 95 deletions(-)

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
This is an unauthorized cybernetic announcement.
#2 lore raw

PATCH 1/1 env_sf: updated to the new environment code

In reply to Stefano Babic
Quoted 7 lines · On Wednesday, October 27, 2010 05:06:20 Stefano Babic wrote:

Functions to store/retrieve the environment from a SPI flash was not updated to the new environment code. The non-redundant case was not working correctly, reporting ""Environment SPI flash not initialized" and the code was not compiled clean in the redundant case.

The patch fixes these issue and makes the code more coherent with other environment storage (nand, flash).

seems to introduce a bug. some Blackfin boards now show:
Configuring for ip04 board...
env_sf.c: In function ?saveenv?:
env_sf.c:275: warning: ?ret? may be used uninitialized in this function -mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20101027/df10b828/attachment.pgp