Skip to contentSkip to conversation

DiSEqC bug fixed for stv0288 based interfaces

PATCH Josef Pavlik 1 participant 1 message Oct 28, 2010 Media (V4L/DVB)

lore
Share & tools
lore

Josef Pavlik

author Tested-by Malcolm Priestley
#0 lore raw

Hi Mauro
can you try to insert it in your GIT please?

Quoted 9 lines
Quoted 9 lines
Quoted 9 lines

Fixed problem with DiSEqC communication. The message was wrongly modulated, so the DiSEqC switch was not work.

This patch fixes DiSEqC messages, simple tone burst and tone on/off. I verified it with osciloscope against the DiSEqC documentation.

Interface: PCI DVB-S TV tuner TeVii S420
Kernel: 2.6.32-24-generic (UBUNTU 10.4)

---------- Forwarded Message ----------

Subject: Re: [PATCH] DiSEqC bug fixed for stv0288 based interfaces
Date: Sunday 26 September 2010
From: tvbox <[email protected]>
To: [email protected]

Hi Josef

This patch does work and has been tested in my driver.

However, your patch was still corrupt, here is a cleaned up version.

I have had to shorten some quotes in some lines to within 80 characters

It is also in my own hg tree at
http://mercurial.intuxication.org/hg/tvboxspy/rev/666fe763c5f6

drivers/media/dvb/frontends/stv0288.c +15 -12
index 2930a5d..6cd442e 100644
@@ -6,6 +6,8 @@
 	Copyright (C) 2008 Igor M. Liplianin <[email protected]>
 		Removed stb6000 specific tuner code and revised some
 		procedures.
+	2010-09-01 Josef Pavlik <[email protected]>
+		Fixed diseqc_msg, diseqc_burst and set_tone problems
 
 	This program is free software; you can redistribute it and/or modify
 	it under the terms of the GNU General Public License as published by
@@ -156,14 +158,13 @@ static int stv0288_send_diseqc_msg(struct dvb_frontend *fe,
 
 	stv0288_writeregI(state, 0x09, 0);
 	msleep(30);
-	stv0288_writeregI(state, 0x05, 0x16);
+	stv0288_writeregI(state, 0x05, 0x12);/* modulated mode, single shot */
 
 	for (i = 0; i < m->msg_len; i++) {
 		if (stv0288_writeregI(state, 0x06, m->msg[i]))
 			return -EREMOTEIO;
-		msleep(12);
 	}
-
+	msleep(m->msg_len*12);
 	return 0;
 }
 
@@ -174,13 +175,14 @@ static int stv0288_send_diseqc_burst(struct dvb_frontend *fe,
 
 	dprintk("%s\n", __func__);
 
-	if (stv0288_writeregI(state, 0x05, 0x16))/* burst mode */
-		return -EREMOTEIO;
-
-	if (stv0288_writeregI(state, 0x06, burst == SEC_MINI_A ? 0x00 : 0xff))
+	if (stv0288_writeregI(state, 0x05, 0x03))/* burst mode, single shot */
+		return -EREMOTEIO;
+
+	if (stv0288_writeregI(state, 0x06, burst == SEC_MINI_A ? 0x00 : 0xff))
 		return -EREMOTEIO;
 
-	if (stv0288_writeregI(state, 0x06, 0x12))
+	msleep(15);
+	if (stv0288_writeregI(state, 0x05, 0x12))
 		return -EREMOTEIO;
 
 	return 0;
@@ -192,18 +194,19 @@ static int stv0288_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
 
 	switch (tone) {
 	case SEC_TONE_ON:
-		if (stv0288_writeregI(state, 0x05, 0x10))/* burst mode */
+		if (stv0288_writeregI(state, 0x05, 0x10))/* cont carrier */
 			return -EREMOTEIO;
-		return stv0288_writeregI(state, 0x06, 0xff);
+	break;
 
 	case SEC_TONE_OFF:
-		if (stv0288_writeregI(state, 0x05, 0x13))/* burst mode */
+		if (stv0288_writeregI(state, 0x05, 0x12))/* burst mode off*/
 			return -EREMOTEIO;
-		return stv0288_writeregI(state, 0x06, 0x00);
+	break;
 
 	default:
 		return -EINVAL;
 	}
+	return 0;
 }
 
 static u8 stv0288_inittab[] = {
Quoted 197 lines

sorry, but something eats the leading spaces (but no the tabs) in the inlined patch making it unusable, so please use the attached one.

---------------------
on Sep 12, 2010, at 13:30, I wrote:
seems that the patch was corrupted by the kmail used for the post (missing space before the last close bracket resulting corrupted patch) the corrected patch follows (and I'm sending it with another mail program)

-------------------------------------

drivers/media/dvb/frontends/stv0288.c +5 -7
index 2930a5d..6cd442e 100644
@@ -6,6 +6,8 @@
        Copyright (C) 2008 Igor M. Liplianin <[email protected]>
                Removed stb6000 specific tuner code and revised some
                procedures.
+        2010-09-01 Josef Pavlik <[email protected]>
+                Fixed diseqc_msg, diseqc_burst and set_tone problems
 
        This program is free software; you can redistribute it and/or modify
        it under the terms of the GNU General Public License as published by
@@ -156,14 +158,13 @@ static int stv0288_send_diseqc_msg(struct dvb_frontend 
 *fe,
 
        stv0288_writeregI(state, 0x09, 0);
        msleep(30);
-       stv0288_writeregI(state, 0x05, 0x16);
+       stv0288_writeregI(state, 0x05, 0x12); /* modulated mode, single shot */
 
        for (i = 0; i < m->msg_len; i++) {
                if (stv0288_writeregI(state, 0x06, m->msg[i]))
                        return -EREMOTEIO;
-               msleep(12);
        }
-
+    msleep(m->msg_len*12); 
        return 0;
 }
@@ -174,13 +175,14 @@ static int stv0288_send_diseqc_burst(struct dvb_frontend 
 *fe,
 
        dprintk("%s\n", __func__);
 
-       if (stv0288_writeregI(state, 0x05, 0x16))/* burst mode */
-               return -EREMOTEIO;
-
-       if (stv0288_writeregI(state, 0x06, burst == SEC_MINI_A ? 0x00 : 0xff))
+    if (stv0288_writeregI(state, 0x05, 0x03)) /* simple tone burst mode, 

single shot */

drivers/media/dvb/frontends/stv0288.c +6 -2
+        return -EREMOTEIO;
+       
+    if (stv0288_writeregI(state, 0x06, burst == SEC_MINI_A ? 0x00 : 0xff))
                return -EREMOTEIO;
 
-       if (stv0288_writeregI(state, 0x06, 0x12))
+    msleep(15);
+       if (stv0288_writeregI(state, 0x05, 0x12))
                return -EREMOTEIO;
 
        return 0;
@@ -192,18 +194,19 @@ static int stv0288_set_tone(struct dvb_frontend *fe, 
 fe_sec_tone_mode_t tone)
 
        switch (tone) {
        case SEC_TONE_ON:
-               if (stv0288_writeregI(state, 0x05, 0x10))/* burst mode */
+               if (stv0288_writeregI(state, 0x05, 0x10))/* burst mode, 

continuous carrier */

                        return -EREMOTEIO;
drivers/media/dvb/frontends/stv0288.c +4 -3
-               return stv0288_writeregI(state, 0x06, 0xff);
+        break;
 
        case SEC_TONE_OFF:
-               if (stv0288_writeregI(state, 0x05, 0x13))/* burst mode */
+               if (stv0288_writeregI(state, 0x05, 0x12))/* burst mode off*/
                        return -EREMOTEIO;
-               return stv0288_writeregI(state, 0x06, 0x00);
+        break;
 
        default:
                return -EINVAL;
        }
+    return 0;

}

static u8 stv0288_inittab[] = {
-----------------------------------------------------

Quoted 98 lines · Mauro Carvalho Chehab

Em 01-09-2010 09:35, Josef Pavlik escreveu:

Quoted 10 lines

Fixed problem with DiSEqC communication. The message was wrongly modulated, so the DiSEqC switch was not work.

This patch fixes DiSEqC messages, simple tone burst and tone on/off. I verified it with osciloscope against the DiSEqC documentation.

Interface: PCI DVB-S TV tuner TeVii S420
Kernel: 2.6.32-24-generic (UBUNTU 10.4)

Patch doesn't apply against the latest version, at my -git tree. Not sure if the bugs you're pointing were already fixed.

Cheers,
Mauro.

Quoted 81 lines
drivers/media/dvb/frontends/stv0288.c +4 -3
index 2930a5d..6a32535 100644
@@ -6,6 +6,8 @@
      Copyright (C) 2008 Igor M. Liplianin <[email protected]>
              Removed stb6000 specific tuner code and revised some
              procedures.
+       2010-09-01 Josef Pavlik <[email protected]>
+               Fixed diseqc_msg, diseqc_burst and set_tone problems
 
      This program is free software; you can redistribute it and/or modify
      it under the terms of the GNU General Public License as published by
@@ -156,14 +158,13 @@ static int stv0288_send_diseqc_msg(struct dvb_frontend 
 *fe,
 
      stv0288_writeregI(state, 0x09, 0);
      msleep(30);
-       stv0288_writeregI(state, 0x05, 0x16);
+       stv0288_writeregI(state, 0x05, 0x12); /* modulated mode, single shot 
 */
 
      for (i = 0; i < m->msg_len; i++) {
              if (stv0288_writeregI(state, 0x06, m->msg[i]))
                      return -EREMOTEIO;
-               msleep(12);
      }
-
+       msleep(m->msg_len*12);
      return 0;

}

drivers/media/dvb/frontends/stv0288.c +1 -1
@@ -174,13 +175,14 @@ static int stv0288_send_diseqc_burst(struct 
 dvb_frontend *fe,
 
      dprintk("%s\n", __func__);
 
-       if (stv0288_writeregI(state, 0x05, 0x16))/* burst mode */
+       if (stv0288_writeregI(state, 0x05, 0x03)) /* "simple tone burst" 

mode, single shot */

              return -EREMOTEIO;

      if (stv0288_writeregI(state, 0x06, burst == SEC_MINI_A ? 0x00 : 0xff))
              return -EREMOTEIO;
drivers/media/dvb/frontends/stv0288.c +3 -2
-       if (stv0288_writeregI(state, 0x06, 0x12))
+       msleep(15);
+       if (stv0288_writeregI(state, 0x05, 0x12))
              return -EREMOTEIO;
 
      return 0;
@@ -192,18 +194,19 @@ static int stv0288_set_tone(struct dvb_frontend *fe, 
 fe_sec_tone_mode_t tone)
 
      switch (tone) {
      case SEC_TONE_ON:
-               if (stv0288_writeregI(state, 0x05, 0x10))/* burst mode */
+               if (stv0288_writeregI(state, 0x05, 0x10))/* burst mode, 

continuous carrier */

                      return -EREMOTEIO;
drivers/media/dvb/frontends/stv0288.c +4 -3
-               return stv0288_writeregI(state, 0x06, 0xff);
+               break;
 
      case SEC_TONE_OFF:
-               if (stv0288_writeregI(state, 0x05, 0x13))/* burst mode */
+               if (stv0288_writeregI(state, 0x05, 0x12))/* burst mode off*/
                      return -EREMOTEIO;
-               return stv0288_writeregI(state, 0x06, 0x00);
+               break;
 
      default:
              return -EINVAL;
      }
+       return 0;

}

Quoted 5 lines
Quoted 5 lines
Quoted 5 lines

static u8 stv0288_inittab[] = {
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

-------------------------------------------------------