spi/pl022: fix erroneous platform data in U300
Subsystems (3)
PATCH 1/1 spi/pl022: fix erroneous platform data in U300
This fixes an erroneous use of LSB first in the U300 machine, the PL022 used in U300 is a standard ARM core that doesn't support this bit so it should never have been set.
Cc Kevin Wells <[email protected]>OA
Signed-off-by Linus Walleij <[email protected]>
--- arch/arm/mach-u300/spi.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/mach-u300/spi.c +1 -1
@@ -67,7 +67,7 @@ static struct spi_board_info u300_spi_devices[] = { .bus_num = 0, /* Only one bus on this chip */ .chip_select = 0, /* Means SPI_CS_HIGH, change if e.g low CS */ - .mode = SPI_MODE_1 | SPI_LSB_FIRST | SPI_LOOP, + .mode = SPI_MODE_1 | SPI_LOOP, },#endif };
Signature · 1 line
1.6.3.3
Grant Likely
AppliedPATCH 1/1 spi/pl022: fix erroneous platform data in U300
Quoted 6 lines · Linus Walleij
This fixes an erroneous use of LSB first in the U300 machine, the PL022 used in U300 is a standard ARM core that doesn't support this bit so it should never have been set.
Cc Kevin Wells <[email protected]>OASigned-off-by Linus Walleij <[email protected]>
Applied, thanks.
Quoted 20 lines
--- arch/arm/mach-u300/spi.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-)arch/arm/mach-u300/spi.c +1
-1@@ -67,7 +67,7 @@ static struct spi_board_info u300_spi_devices[] = { .bus_num = 0, /* Only one bus on this chip */ .chip_select = 0, /* Means SPI_CS_HIGH, change if e.g low CS */ - .mode = SPI_MODE_1 | SPI_LSB_FIRST | SPI_LOOP, + .mode = SPI_MODE_1 | SPI_LOOP, },#endif };Signature · 1 line
1.6.3.3