Skip to contentSkip to conversation

Various code improvements for IGEP v2 board.

PATCH New Enric Balletbo i Serra 2 participants 5 messages Oct 23, 2010 – Nov 5, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v2 cover Various code improvements for IGEP v2 board.

Hello,

The comments of this post also apply to IGEP v2 board (thanks Laurent)

http://www.mail-archive.com/linux-omap at vger.kernel.org/msg36402.html

Changes since v1:
- Split patch in a serie.
- [1/3] onenand_setup = NULL, is a static variable, removed from code.

This patch apply on top of tmlind/omap-for-linux branch.

$ git diff --stat tmlind/omap-for-linus 
 arch/arm/mach-omap2/board-igep0020.c |   35 ++++++++++-----------------------
 1 files changed, 11 insertions(+), 24 deletions(-)

Cheers,
Enric

#1 lore raw

PATCH v2 1/3 omap3: IGEP v2: Remove onenand_setup no-op function.

Set onenand_setup to NULL instead of adding a no-op function.

---
 arch/arm/mach-omap2/board-igep0020.c |    7 -------
 1 files changed, 0 insertions(+), 7 deletions(-)
arch/arm/mach-omap2/board-igep0020.c +0 -7
index 5e035a5..20b199f 100644
@@ -136,16 +136,9 @@ static struct mtd_partition igep2_onenand_partitions[] = {
 	},
 };
 
-static int igep2_onenand_setup(void __iomem *onenand_base, int freq)
-{
-       /* nothing is required to be setup for onenand as of now */
-       return 0;
-}
-
 static struct omap_onenand_platform_data igep2_onenand_data = {
 	.parts = igep2_onenand_partitions,
 	.nr_parts = ARRAY_SIZE(igep2_onenand_partitions),
-	.onenand_setup = igep2_onenand_setup,
 	.dma_channel	= -1,	/* disable DMA in OMAP OneNAND driver */
 };
 
Signature · 1 line
1.7.1
#2 lore raw

PATCH v2 2/3 omap3: IGEP v2: Remove igep2_config array.

In reply to Enric Balletbo i Serra

omap_board_config_size is implicitly initialized to 0 in plat-omap/common.c, get_config() won't dereference omap_board_config, so we can remove the empty igep2_config array.

---
 arch/arm/mach-omap2/board-igep0020.c |    5 -----
 1 files changed, 0 insertions(+), 5 deletions(-)
arch/arm/mach-omap2/board-igep0020.c +0 -5
index 20b199f..42dcbf4 100644
@@ -247,9 +247,6 @@ static inline void __init igep2_init_smsc911x(void)
 static inline void __init igep2_init_smsc911x(void) { }
 #endif
 
-static struct omap_board_config_kernel igep2_config[] __initdata = {
-};
-
 static struct regulator_consumer_supply igep2_vmmc1_supply = {
 	.supply		= "vmmc",
 };
@@ -486,8 +483,6 @@ static struct platform_device *igep2_devices[] __initdata = {
 
 static void __init igep2_init_irq(void)
 {
-	omap_board_config = igep2_config;
-	omap_board_config_size = ARRAY_SIZE(igep2_config);
 	omap2_init_common_hw(m65kxxxxam_sdrc_params, m65kxxxxam_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
Signature · 1 line
1.7.1
#3 lore raw

PATCH v3 3/3 omap3: IGEP v2: Improve igep2_flash_init() function.

In reply to Enric Balletbo i Serra

The changes are:
- Use 'for' loop instead 'while' loop.
- No need to initialize ret to 0, we're assigning it right after.
- No need to check for onenandcs < GPMC_CS_NUM here, it will always be true.

---
 arch/arm/mach-omap2/board-igep0020.c |   23 +++++++++++------------
 1 files changed, 11 insertions(+), 12 deletions(-)
arch/arm/mach-omap2/board-igep0020.c +11 -12
index 42dcbf4..fe76b59 100644
@@ -152,35 +152,34 @@ static struct platform_device igep2_onenand_device = {
 
 static void __init igep2_flash_init(void)
 {
-	u8		cs = 0;
-	u8		onenandcs = GPMC_CS_NUM + 1;
+	u8 cs = 0;
+	u8 onenandcs = GPMC_CS_NUM + 1;
 
-	while (cs < GPMC_CS_NUM) {
-		u32 ret = 0;
+	for (cs = 0; cs < GPMC_CS_NUM; cs++) {
+		u32 ret;
 		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
 
 		/* Check if NAND/oneNAND is configured */
 		if ((ret & 0xC00) == 0x800)
 			/* NAND found */
-			pr_err("IGEP v2: Unsupported NAND found\n");
+			pr_err("IGEP2: Unsupported NAND found\n");
 		else {
 			ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
 			if ((ret & 0x3F) == (ONENAND_MAP >> 24))
 				/* ONENAND found */
 				onenandcs = cs;
 		}
-		cs++;
 	}
+
 	if (onenandcs > GPMC_CS_NUM) {
-		pr_err("IGEP v2: Unable to find configuration in GPMC\n");
+		pr_err("IGEP2: Unable to find configuration in GPMC\n");
 		return;
 	}
 
-	if (onenandcs < GPMC_CS_NUM) {
-		igep2_onenand_data.cs = onenandcs;
-		if (platform_device_register(&igep2_onenand_device) < 0)
-			pr_err("IGEP v2: Unable to register OneNAND device\n");
-	}
+	igep2_onenand_data.cs = onenandcs;
+
+	if (platform_device_register(&igep2_onenand_device) < 0)
+		pr_err("IGEP2: Unable to register OneNAND device\n");
 }
 
 #else
Signature · 1 line
1.7.1
maintainer
#4 lore raw

v2 cover Various code improvements for IGEP v2 board.

In reply to Enric Balletbo i Serra
Quoted 11 lines · Enric Balletbo i Serra

Hello,

The comments of this post also apply to IGEP v2 board (thanks Laurent)

http://www.mail-archive.com/linux-omap at vger.kernel.org/msg36402.html

Changes since v1:
- Split patch in a serie.
- [1/3] onenand_setup = NULL, is a static variable, removed from code.

Quoted 5 lines

This patch apply on top of tmlind/omap-for-linux branch.

$ git diff --stat tmlind/omap-for-linus 
 arch/arm/mach-omap2/board-igep0020.c |   35 ++++++++++-----------------------
 1 files changed, 11 insertions(+), 24 deletions(-)

Thanks, I'll queue these for 2.6.38 merge window.

Regards,

Tony