GStreamer patches for OMAP3
cover GStreamer patches for OMAP3
Hi,
The first patch is a bit of improvement for GStreamer, the next two enable TI's OMAP3 DSP (by using tidspbridge driver), the fourth ist some tools to test the afforementioned DSP, and the final one is another video sink optimized for OMAP.
I've tested these on a Nokia N900, but should work on any OMAP3 device.
Felipe Contreras (5):
gstreamer: remove unnecessary feature
Add tidsp-binaries package
Add gst-dsp package
Add dsp-tools package
Add gst-omapfb package
package/Config.in | 1 + package/dsp-tools/Config.in | 7 +++++++ package/dsp-tools/dsp-tools.mk | 13 +++++++++++++ package/multimedia/Config.in | 3 +++ package/multimedia/gst-dsp/Config.in | 8 ++++++++ package/multimedia/gst-dsp/gst-dsp.mk | 15 +++++++++++++++ package/multimedia/gst-omapfb/Config.in | 7 +++++++ package/multimedia/gst-omapfb/gst-omapfb.mk | 15 +++++++++++++++ package/multimedia/gstreamer/Config.in | 6 ------ package/multimedia/gstreamer/gstreamer.mk | 10 ++-------- package/multimedia/tidsp-binaries/Config.in | 6 ++++++ .../multimedia/tidsp-binaries/tidsp-binaries.mk | 9 +++++++++ 12 files changed, 86 insertions(+), 14 deletions(-) create mode 100644 package/dsp-tools/Config.in create mode 100644 package/dsp-tools/dsp-tools.mk create mode 100644 package/multimedia/gst-dsp/Config.in create mode 100644 package/multimedia/gst-dsp/gst-dsp.mk create mode 100644 package/multimedia/gst-omapfb/Config.in create mode 100644 package/multimedia/gst-omapfb/gst-omapfb.mk create mode 100644 package/multimedia/tidsp-binaries/Config.in create mode 100644 package/multimedia/tidsp-binaries/tidsp-binaries.mk
Signature · 1 line
1.7.3
PATCH 1/5 gstreamer: remove unnecessary feature
On 0.10.11 the binary-registry was added, on 0.10.12 the libxml2 dependency was dropped when binary-registry was used, on 0.10.18 the binary-registry was made default, and on 0.10.23 it was the only option.
So, libxml2 is not needed any more for the registry.
--- package/multimedia/gstreamer/Config.in | 6 ------ package/multimedia/gstreamer/gstreamer.mk | 10 ++-------- 2 files changed, 2 insertions(+), 14 deletions(-)
package/multimedia/gstreamer/Config.in +0 -6
@@ -9,9 +9,3 @@ config BR2_PACKAGE_GSTREAMER comment "gstreamer requires a toolchain with WCHAR support" depends on !BR2_USE_WCHAR - -config BR2_PACKAGE_GSTREAMER_LIBXML2 - bool "require libxml2 for registry and load/save" - default y - select BR2_PACKAGE_LIBXML2 - depends on BR2_PACKAGE_GSTREAMER
package/multimedia/gstreamer/gstreamer.mk +2 -8
@@ -19,15 +19,9 @@ endif GSTREAMER_CONF_OPT = \ --disable-examples \ --disable-tests \ - --disable-failing-tests + --disable-failing-tests \ + --disable-loadsave GSTREAMER_DEPENDENCIES = libglib2 host-pkg-config -ifeq ($(BR2_PACKAGE_GSTREAMER_LIBXML2),y) -GSTREAMER_DEPENDENCIES += libxml2 -else -GSTREAMER_CONF_OPT += \ - --disable-loadsave -endif - $(eval $(call AUTOTARGETS,package/multimedia,gstreamer))
Signature · 1 line
1.7.3
PATCH 2/5 Add tidsp-binaries package
In reply to Felipe Contreras--- package/multimedia/Config.in | 1 + package/multimedia/tidsp-binaries/Config.in | 6 ++++++ .../multimedia/tidsp-binaries/tidsp-binaries.mk | 9 +++++++++ 3 files changed, 16 insertions(+), 0 deletions(-) create mode 100644 package/multimedia/tidsp-binaries/Config.in create mode 100644 package/multimedia/tidsp-binaries/tidsp-binaries.mk
package/multimedia/Config.in +1 -0
@@ -25,6 +25,7 @@ source "package/multimedia/mpg123/Config.in" source "package/multimedia/mplayer/Config.in" source "package/multimedia/speex/Config.in" source "package/multimedia/swfdec/Config.in" +source "package/multimedia/tidsp-binaries/Config.in" source "package/multimedia/festival/Config.in" source "package/multimedia/taglib/Config.in" source "package/multimedia/tremor/Config.in"
package/multimedia/tidsp-binaries/Config.in new file +6 -0
@@ -0,0 +1,6 @@ +config BR2_PACKAGE_TIDSP_BINARIES + bool "tidsp-binaries" + help + TI OMAP3 DSP algorithms. + + https://gforge.ti.com/gf/project/openmax/
package/multimedia/tidsp-binaries/tidsp-binaries.mk new file +9 -0
@@ -0,0 +1,9 @@ +TIDSP_BINARIES_VERSION=23.i3.8 +TIDSP_BINARIES_SOURCE=tidsp-binaries-$(TIDSP_BINARIES_VERSION).tar.gz +TIDSP_BINARIES_SITE:=http://gst-dsp.googlecode.com/files/ + +define TIDSP_BINARIES_INSTALL_TARGET_CMDS + $(MAKE) -C $(@D) -e DESTDIR=$(TARGET_DIR) install +endef + +$(eval $(call GENTARGETS,package/multimedia,tidsp-binaries))
Signature · 1 line
1.7.3
PATCH 3/5 Add gst-dsp package
In reply to Felipe Contreras--- package/multimedia/Config.in | 1 + package/multimedia/gst-dsp/Config.in | 8 ++++++++ package/multimedia/gst-dsp/gst-dsp.mk | 15 +++++++++++++++ 3 files changed, 24 insertions(+), 0 deletions(-) create mode 100644 package/multimedia/gst-dsp/Config.in create mode 100644 package/multimedia/gst-dsp/gst-dsp.mk
package/multimedia/Config.in +1 -0
@@ -5,6 +5,7 @@ source "package/multimedia/aumix/Config.in" source "package/multimedia/flac/Config.in" source "package/multimedia/ffmpeg/Config.in" source "package/multimedia/gstreamer/Config.in" +source "package/multimedia/gst-dsp/Config.in" source "package/multimedia/gst-plugins-base/Config.in" source "package/multimedia/gst-plugins-good/Config.in" source "package/multimedia/gst-plugins-bad/Config.in"
package/multimedia/gst-dsp/Config.in new file +8 -0
@@ -0,0 +1,8 @@ +config BR2_PACKAGE_GST_DSP + bool "gst-dsp" + depends on BR2_PACKAGE_GSTREAMER + select BR2_PACKAGE_TIDSP_BINARIES + help + GStreamer plug-in to access TI OMAP3 DSP algorithms. + + http://code.google.com/p/gst-dsp/
package/multimedia/gst-dsp/gst-dsp.mk new file +15 -0
@@ -0,0 +1,15 @@ +GST_DSP_VERSION=0.8.0 +GST_DSP_SOURCE=gst-dsp-$(GST_DSP_VERSION).tar.gz +GST_DSP_SITE=http://gst-dsp.googlecode.com/files/ + +define GST_DSP_BUILD_CMDS + $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D) -e +endef + +define GST_DSP_INSTALL_TARGET_CMDS + $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D) -e DESTDIR=$(TARGET_DIR) install +endef + +GST_DSP_DEPENDENCIES = gstreamer + +$(eval $(call GENTARGETS,package/multimedia,gst-dsp))
Signature · 1 line
1.7.3
PATCH 4/5 Add dsp-tools package
In reply to Felipe Contreras--- package/Config.in | 1 + package/dsp-tools/Config.in | 7 +++++++ package/dsp-tools/dsp-tools.mk | 13 +++++++++++++ 3 files changed, 21 insertions(+), 0 deletions(-) create mode 100644 package/dsp-tools/Config.in create mode 100644 package/dsp-tools/dsp-tools.mk
package/Config.in +1 -0
@@ -466,6 +466,7 @@ source "package/sysklogd/Config.in" source "package/sysvinit/Config.in" source "package/util-linux/Config.in" endif +source "package/dsp-tools/Config.in" endmenu menu "Text editors and viewers"
package/dsp-tools/Config.in new file +7 -0
@@ -0,0 +1,7 @@ +config BR2_PACKAGE_DSP_TOOLS + bool "dsp-tools" + select BR2_PACKAGE_TIDSP_BINARIES + help + Utilities for TI OMAP3 DSP. + + http://github.com/felipec/dsp-tools
package/dsp-tools/dsp-tools.mk new file +13 -0
@@ -0,0 +1,13 @@ +DSP_TOOLS_VERSION=2.0 +DSP_TOOLS_SOURCE=dsp-tools-$(DSP_TOOLS_VERSION).tar.gz +DSP_TOOLS_SITE=http://gst-dsp.googlecode.com/files/ + +define DSP_TOOLS_BUILD_CMDS + $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D) -e +endef + +define DSP_TOOLS_INSTALL_TARGET_CMDS + $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D) -e DESTDIR=$(TARGET_DIR) install +endef + +$(eval $(call GENTARGETS,package,dsp-tools))
Signature · 1 line
1.7.3
PATCH 5/5 Add gst-omapfb package
In reply to Felipe Contreras--- package/multimedia/Config.in | 1 + package/multimedia/gst-omapfb/Config.in | 7 +++++++ package/multimedia/gst-omapfb/gst-omapfb.mk | 15 +++++++++++++++ 3 files changed, 23 insertions(+), 0 deletions(-) create mode 100644 package/multimedia/gst-omapfb/Config.in create mode 100644 package/multimedia/gst-omapfb/gst-omapfb.mk
package/multimedia/Config.in +1 -0
@@ -6,6 +6,7 @@ source "package/multimedia/flac/Config.in" source "package/multimedia/ffmpeg/Config.in" source "package/multimedia/gstreamer/Config.in" source "package/multimedia/gst-dsp/Config.in" +source "package/multimedia/gst-omapfb/Config.in" source "package/multimedia/gst-plugins-base/Config.in" source "package/multimedia/gst-plugins-good/Config.in" source "package/multimedia/gst-plugins-bad/Config.in"
package/multimedia/gst-omapfb/Config.in new file +7 -0
@@ -0,0 +1,7 @@ +config BR2_PACKAGE_GST_OMAPFB + bool "gst-omapfb" + depends on BR2_PACKAGE_GSTREAMER + help + GStreamer plug-in to use OMAP framebuffer. + + http://github.com/felipec/gst-omapfb
package/multimedia/gst-omapfb/gst-omapfb.mk new file +15 -0
@@ -0,0 +1,15 @@ +GST_OMAPFB_VERSION=1.0 +GST_OMAPFB_SOURCE=gst-omapfb-$(GST_OMAPFB_VERSION).tar.gz +GST_OMAPFB_SITE=http://gst-dsp.googlecode.com/files/ + +define GST_OMAPFB_BUILD_CMDS + $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D) -e +endef + +define GST_OMAPFB_INSTALL_TARGET_CMDS + $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D) -e DESTDIR=$(TARGET_DIR) install +endef + +GST_OMAPFB_DEPENDENCIES = gstreamer + +$(eval $(call GENTARGETS,package/multimedia,gst-omapfb))
Signature · 1 line
1.7.3
cover GStreamer patches for OMAP3
In reply to Felipe ContrerasHi,
Quoted 6 lines · Felipe Contreras
The first patch is a bit of improvement for GStreamer, the next two enable TI's OMAP3 DSP (by using tidspbridge driver), the fourth ist some tools to test the afforementioned DSP, and the final one is another video sink optimized for OMAP.
I've tested these on a Nokia N900, but should work on any OMAP3 device.
Ping? Is there anything wrong with these?
Signature · 1 line
Felipe Contreras
cover GStreamer patches for OMAP3
Quoted 10 lines · Felipe Contreras
Quoted 6 lines · Felipe Contreras
The first patch is a bit of improvement for GStreamer, the next two enable TI's OMAP3 DSP (by using tidspbridge driver), the fourth ist some tools to test the afforementioned DSP, and the final one is another video sink optimized for OMAP.
I've tested these on a Nokia N900, but should work on any OMAP3 device.
Ping? Is there anything wrong with these?
Hello?
Signature · 1 line
Felipe Contreras
cover GStreamer patches for OMAP3
In reply to Felipe ContrerasQuoted 5 lines · On Mon, 20 Sep 2010 02:42:54 +0300 Felipe Contreras…
The first patch is a bit of improvement for GStreamer, the next two enable TI's OMAP3 DSP (by using tidspbridge driver), the fourth ist some tools to test the afforementioned DSP, and the final one is another video sink optimized for OMAP.
Quoted 8 lines
I've tested these on a Nokia N900, but should work on any OMAP3 device.
Felipe Contreras (5):
gstreamer: remove unnecessary feature
Add tidsp-binaries package
Add gst-dsp package
Add dsp-tools package
Add gst-omapfb package
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com