Skip to contentSkip to conversation

Add support for quick boot

RFC New Sanjeev Premi 3 participants 3 messages Oct 29, 2010 – Nov 14, 2010

lore
Share & tools
lore
#0 lore raw

v2 cover Add support for quick boot

This series attempts to address specific feedback[1] from Wolfgang Denk to my previous submission.

Since this series is based on u-boot master, it is missing these patches for successful build:
a) omap3evm: Support relocation

    http://marc.info/?l=u-boot&m=128748423503307&w=2
 b) omap3evm: Move function to identify board revision
    http://marc.info/?l=u-boot&m=128749414618147&w=2
 c) omap3evm: Fix mechanism to identify board revision
    http://marc.info/?l=u-boot&m=128757192518074&w=2

I am hoping this series illustrates exact changes done. However, my choice of filenames results in rather long config names for two new configurations. I plan to replace "quick" with simple "q". Does it sound ok?

References:
[1] http://marc.info/?l=u-boot&m=128828487429161&w=2
[2] http://marc.info/?l=u-boot&m=128818733126234&w=2
[3] http://marc.info/?l=u-boot&m=128818664024766&w=2

Patch (a) is required for successful build for current configuration. Patches (b) and (c) were required for successful build of "quick" configurations. I am yet to test these on this patchset. Will do before final submission.

Sanjeev Premi (3):
omap3evm: Reorder related config options
omap3evm: move common config options to new file
omap3evm: Add quick boot configurations

 boards.cfg                             |    2 +
 include/configs/omap3_evm.h            |  302 +++++++-------------------------
 include/configs/omap3_evm_common.h     |  226 ++++++++++++++++++++++++
 include/configs/omap3_evm_quick_mmc.h  |   53 ++++++
 include/configs/omap3_evm_quick_nand.h |   48 +++++
 5 files changed, 391 insertions(+), 240 deletions(-)
 create mode 100644 include/configs/omap3_evm_common.h
 create mode 100644 include/configs/omap3_evm_quick_mmc.h
 create mode 100644 include/configs/omap3_evm_quick_nand.h

--
1.7.2.2

#1 lore raw

v2 cover Add support for quick boot

Quoted 34 lines

-----Original Message-----
From: Premi, Sanjeev
Sent: Friday, October 29, 2010 9:35 PM
To: u-boot at lists.denx.de
Cc: Premi, Sanjeev
Subject: [RFCv2 0/3] Add support for quick boot

This series attempts to address specific feedback[1] from Wolfgang Denk to my previous submission.

Since this series is based on u-boot master, it is missing these patches for successful build:
a) omap3evm: Support relocation

    http://marc.info/?l=u-boot&m=128748423503307&w=2
 b) omap3evm: Move function to identify board revision
    http://marc.info/?l=u-boot&m=128749414618147&w=2
 c) omap3evm: Fix mechanism to identify board revision
    http://marc.info/?l=u-boot&m=128757192518074&w=2

I am hoping this series illustrates exact changes done. However, my choice of filenames results in rather long config names for two new configurations. I plan to replace "quick" with simple "q". Does it sound ok?

References:
[1] http://marc.info/?l=u-boot&m=128828487429161&w=2
[2] http://marc.info/?l=u-boot&m=128818733126234&w=2
[3] http://marc.info/?l=u-boot&m=128818664024766&w=2

Patch (a) is required for successful build for current configuration. Patches (b) and (c) were required for successful build of "quick" configurations. I am yet to test these on this patchset. Will do before final submission.

Quoted 5 lines

Sanjeev Premi (3):
omap3evm: Reorder related config options
omap3evm: move common config options to new file
omap3evm: Add quick boot configurations

Hi Wolfgang,

Did you get chance to look at this series?

~sanjeev

#2 lore raw

v2 cover Add support for quick boot

Dear "Premi, Sanjeev",

Quoted 2 lines · In message <[email protected]> you…

Did you get chance to look at this series?

Looks OK to me, but you should have put Sandeep on Cc: as this has to go through his custodian tree.

Best regards,

Wolfgang Denk

Signature · 8 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Many companies that have made themselves dependent on [the  equipment
of  a  certain  major  manufacturer] (and in doing so have sold their
soul to the devil) will collapse under the sheer weight  of  the  un-
mastered complexity of their data processing systems.
          -- Edsger W. Dijkstra, SIGPLAN Notices, Volume 17, Number 5