OMAP1: drop AMS_DELTA_FIQ config option
Subsystems (4)
PATCH v2 1/1 OMAP1: drop AMS_DELTA_FIQ config option
This patches removes a config option that was used to select a FIQ handler to be build for Amstrad Delta, as required by the on-board serio interface driver. Not having any problem reports received since it was introduced in 2.6.35, the FIQ handler can now be built and initialized by default, thus reqiring no extra config option.
This change was requested by Tony Lindgren, the OMAP subsystem maintainer.
Created and tested against linux-2.6.37-rc1
---
v1 -> v2 changes:
- it does not make sense to split into 2 patches, fold together - requested by Dmitry Torokhov - thanks.
arch/arm/mach-omap1/Kconfig | 11 +---------- arch/arm/mach-omap1/Makefile | 4 ++-- arch/arm/mach-omap1/board-ams-delta.c | 2 -- drivers/input/serio/Kconfig | 1 - 4 files changed, 3 insertions(+), 15 deletions(-)
arch/arm/mach-omap1/board-ams-delta.c renamed from arch/arm/mach-omap1/board-ams-delta.c.orig +0 -2
@@ -307,9 +307,7 @@ static void __init ams_delta_init(void)#endif platform_add_devices (ams_delta_devices,ARRAY_SIZE (ams_delta_devices)); -#ifdef CONFIG_AMS_DELTA_FIQ ams_delta_init_fiq (); -#endif omap_writew (omap_readw (ARM_RSTCT1 ) |0x0004 ,ARM_RSTCT1 ); }
arch/arm/mach-omap1/Makefile renamed from arch/arm/mach-omap1/Makefile.orig +2 -2
@@ -39,8 +39,8 @@ obj-$(CONFIG_MACH_OMAP_PALMTE) += board obj-$(CONFIG_MACH_OMAP_PALMZ71) += board-palmz71.o obj-$(CONFIG_MACH_OMAP_PALMTT) += board-palmtt.o obj-$(CONFIG_MACH_NOKIA770) += board-nokia770.o -obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o -obj-$(CONFIG_AMS_DELTA_FIQ) += ams-delta-fiq.o ams-delta-fiq-handler.o +obj-$(CONFIG_MACH_AMS_DELTA) += board-ams-delta.o ams-delta-fiq.o \ + ams-delta-fiq-handler.o obj-$(CONFIG_MACH_SX1) += board-sx1.o board-sx1-mmc.o obj-$(CONFIG_MACH_HERALD) += board-htcherald.o
arch/arm/mach-omap1/Kconfig renamed from arch/arm/mach-omap1/Kconfig.orig +1 -10
@@ -152,20 +152,11 @@ config MACH_NOKIA770 config MACH_AMS_DELTA bool "Amstrad E3 (Delta)" depends on ARCH_OMAP1 && ARCH_OMAP15XX + select FIQ help Support for the Amstrad E3 (codename Delta) videophone. Say Y here if you have such a device. -config AMS_DELTA_FIQ - bool "Fast Interrupt Request (FIQ) support for the E3" - depends on MACH_AMS_DELTA - select FIQ - help - Provide a FIQ handler for the E3. - This allows for fast handling of interrupts generated - by the clock line of the E3 mailboard (or a PS/2 keyboard) - connected to the GPIO based external keyboard port. - config MACH_OMAP_GENERIC bool "Generic OMAP board" depends on ARCH_OMAP1 && (ARCH_OMAP15XX || ARCH_OMAP16XX)
drivers/input/serio/Kconfig renamed from drivers/input/serio/Kconfig.orig +0 -1
@@ -214,7 +214,6 @@ config SERIO_AMS_DELTA tristate "Amstrad Delta (E3) mailboard support" depends on MACH_AMS_DELTA default y - select AMS_DELTA_FIQ ---help--- Say Y here if you have an E3 and want to use its mailboard, or any standard AT keyboard connected to the mailboard port.
Tony Lindgren
reviewerPATCH v2 1/1 OMAP1: drop AMS_DELTA_FIQ config option
Quoted 5 lines · Janusz Krzysztofik
This patches removes a config option that was used to select a FIQ handler to be build for Amstrad Delta, as required by the on-board serio interface driver. Not having any problem reports received since it was introduced in 2.6.35, the FIQ handler can now be built and initialized by default, thus reqiring no extra config option.
Thanks, I'll queue this for 2.6.38 merge window.
Tony