Skip to contentSkip to conversation

net: add priority field to pktgen

PATCH Applied John Fastabend 3 participants 3 messages Nov 17, 2010 – Nov 18, 2010

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 net: add priority field to pktgen

Add option to set skb priority to pktgen. Useful for testing QOS features. Also by running pktgen on the vlan device the qdisc on the real device can be tested.

---

 net/core/pktgen.c |   20 ++++++++++++++++++++
 1 files changed, 20 insertions(+), 0 deletions(-)
net/core/pktgen.c +20 -0
index 33bc382..52fc1e0 100644
@@ -378,6 +378,7 @@ struct pktgen_dev {
 
 	u16 queue_map_min;
 	u16 queue_map_max;
+	__u32 skb_priority;	/* skb priority field */
 	int node;               /* Memory node */
 
 #ifdef CONFIG_XFRM
@@ -547,6 +548,10 @@ static int pktgen_if_show(struct seq_file *seq, void *v)
 		   pkt_dev->queue_map_min,
 		   pkt_dev->queue_map_max);
 
+	if (pkt_dev->skb_priority)
+		seq_printf(seq, "     skb_priority: %u\n",
+			   pkt_dev->skb_priority);
+
 	if (pkt_dev->flags & F_IPV6) {
 		char b1[128], b2[128], b3[128];
 		fmt_ip6(b1, pkt_dev->in6_saddr.s6_addr);
@@ -1711,6 +1716,18 @@ static ssize_t pktgen_if_write(struct file *file,
 		return count;
 	}
 
+	if (!strcmp(name, "skb_priority")) {
+		len = num_arg(&user_buffer[i], 9, &value);
+		if (len < 0)
+			return len;
+
+		i += len;
+		pkt_dev->skb_priority = value;
+		sprintf(pg_result, "OK: skb_priority=%i",
+			pkt_dev->skb_priority);
+		return count;
+	}
+
 	sprintf(pkt_dev->result, "No such parameter \"%s\"", name);
 	return -EINVAL;
 }
@@ -2671,6 +2688,8 @@ static struct sk_buff *fill_packet_ipv4(struct net_device *odev,
 	skb->transport_header = skb->network_header + sizeof(struct iphdr);
 	skb_put(skb, sizeof(struct iphdr) + sizeof(struct udphdr));
 	skb_set_queue_mapping(skb, queue_map);
+	skb->priority = pkt_dev->skb_priority;
+
 	iph = ip_hdr(skb);
 	udph = udp_hdr(skb);
 
@@ -3016,6 +3035,7 @@ static struct sk_buff *fill_packet_ipv6(struct net_device *odev,
 	skb->transport_header = skb->network_header + sizeof(struct ipv6hdr);
 	skb_put(skb, sizeof(struct ipv6hdr) + sizeof(struct udphdr));
 	skb_set_queue_mapping(skb, queue_map);
+	skb->priority = pkt_dev->skb_priority;
 	iph = ipv6_hdr(skb);
 	udph = udp_hdr(skb);
 
maintainer Applied
#2 lore raw

From: Eric Dumazet <[email protected]>
Date: Wed, 17 Nov 2010 06:27:17 +0100

Quoted 9 lines · John Fastabend
Quoted 6 lines

Add option to set skb priority to pktgen. Useful for testing QOS features. Also by running pktgen on the vlan device the qdisc on the real device can be tested.

---

Applied, thanks everyone.

This will be useful for stressing things like VLAN qos I guess :-)